PROBLEM: oops in 2.4.23pre1, Promise-ide, samba

DISCUSSION Sebastian Piecha 1 participant 1 message Sep 23, 2003

Subsystems (2)

Networking Network drivers

lore

Share & tools

lore

Sebastian Piecha

author

2003-09-23 22:58 UTC #0 lore raw

Hello,

several times I got an OOPS. Here's a description of what has happened. Any help would be appreciated. Please CC me on all further mail traffic.

###############################################################

1) one line summary:
When moving data (more than 4GB) from a Windows XP Client to a samba share or checking data stored on the samba share (Powerquest DriveImage images, 56 files, each ~700MB of size, checking with the Powerquest Image Explorer) the kernel panics with an OOPS. Linux has to be resetted hard. When accessing the data via NFS no OOPS is occurring.

The error occured on kernel 2.4.20 with samba 2.2.7a and 2.2.8a. Now I tried kernel 2.4.23pre1 with samba 2.2.8a and again the error occurred.

###############################################################

2) full description:

I'm using Samba to distribute some shares to Windows clients. One of the shares is an Image-directory where I'm storing PQDI Images of Windows clients. One of the created images is about 40GB of size and is split up to 56 files each of same size. When verifying this image from a Win XP client, PQDI stops with an error (error 1811, "Could not read from image file") and the Linux kernel panics. Verifying this image from DOS (with MS network client) is done without any error. Also verifying smaller images is done without any error. Verifying this Image via NFS is also done without an error. Another PQDI version (7.0) also reports an error and the Linux Kernel panics. Copying more than 4 GB to the samba share also lets the kernel panic with an OOPS. Copying data locally from the Linux console is done without an error.

In the beginning I thought that the Promise controller is the source of problem, now I'm not sure. Maybe it's samba or the combination of samba and a Promise controller.

The share is lying in a directory on a Reiser filesystem:

share Images
ReiserFS
LVM (on /dev/md0 only, 120GB)
RAID1 /dev/md0 (120GB)
/dev/hda1 + /dev/hde1 (one primary partition of 120GB on each drive) /dev/hda + /dev/hde (each 120GB) IDE UDMA133-controller

As IDE-controller I first used a Promise FastTrak TX2000 (which supports "hardware"-RAID). I tried the binary Promise-driver (1.03.0.1) and the source code-driver (1.02.0.25), both without success. All time the OOPS occurred. Then I replaced the controller and both Samsung SP1203N-hard drives (each 120GB) against a Promise UltraTrak 133 TX2 and two Maxtor drives (6Y120P0, each 1 20GB) and installed a Linux native software-RAID without any Promise-driver. But again the OOPS occurred. Of course I updated the Promise-firmware to the latest level.

To eliminate the RAID and LVM-drivers as the source of problem I installed just a Reiser FS on one 120GB-primary partition on one of both Maxtor disks (after removing the drive from the RAID). But again the Linux kernel panicked. Trying ext3 instead of reiserfs didn't help. As I do not have enough space on my scsi-disks I can't verify this big image from a scsi-disk.

Sometimes the Linux kernel panic occurs immediately some minutes after starting the verify, sometimes it happens after reading half of all image files. Samba doesn't report any error. I also tried a different PCI-slot for the Promise- adapter without any success. Next thing would be to try a different IDE-controller...

###############################################################

3) keywords:
Suse Linux 8.20, kernel 2.4.23pre1, Promise Ultra 133 TX2, samba 2.28a

###############################################################

4) /proc/version:
Linux version 2.4.23pre1-usbtest ([email protected]) (gcc version 3.2.2) #1 Wed Aug 27 19:43:12 UTC 2003

###############################################################

5) OOPS-message:

Oops: 0000
CPU:    0
EIP:    0010:[<c0219cd7>]    Not tainted

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010206
eax: c40866a0 ebx: 00200000 ecx: c40866a0 edx: 00200000
esi: cec57360 edi: fffffff9 ebp: 00000046 esp: c0303f2c
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c0303000)

Stack: cec57360 c0219d6e cec57360 cec57360 cec57360 c0219dab cec57360 
cec57360
       c0219efc cec57360 cf49cb20 c021e173 cec57360 00000003 c032c568 
c0120629
       c032c568 00000006 0000000e c0303f98 d3e02e40 c010a091 c0106f40 
c0302000
Call Trace:    [<c0219d6e>] [<c0219dab>] [<c0219efc>] [<c021e173>]

[<c0120629>]
[<c010a091>] [<c0106f40>] [<c010c4e8>] [<c0106f40>] [<c0106f64>]
[<c0106fd2>]
[<c0105000>]

Code: 8b 1b 8b 42 74 48 74 0a ff 4a 74 0f 94 c0 84 c0 74 07 52 e8

Quoted 6 lines

Quoted 6 lines
EIP; c0219cd7 <skb_drop_fraglist+17/40> <=====
eax; c40866a0 <_end+3cf81fc/14e64bbc>
ecx; c40866a0 <_end+3cf81fc/14e64bbc>
esi; cec57360 <_end+e8c8ebc/14e64bbc>
esp; c0303f2c <init_task_union+1f2c/2000>

Trace; c0219d6e <skb_release_data+4e/80>
Trace; c0219dab <kfree_skbmem+b/70>
Trace; c0219efc <__kfree_skb+ec/150>
Trace; c021e173 <net_tx_action+33/a0>
Trace; c0120629 <do_softirq+99/a0>
Trace; c010a091 <do_IRQ+a1/b0>
Trace; c0106f40 <default_idle+0/30>
Trace; c010c4e8 <call_do_IRQ+5/d>
Trace; c0106f40 <default_idle+0/30>
Trace; c0106f64 <default_idle+24/30>
Trace; c0106fd2 <cpu_idle+42/60>
Trace; c0105000 <_stext+0/0>

Code; c0219cd7 <skb_drop_fraglist+17/40>
00000000 <_EIP>:
Code; c0219cd7 <skb_drop_fraglist+17/40> <=====
0: 8b 1b mov (%ebx),%ebx <=====
Code; c0219cd9 <skb_drop_fraglist+19/40>
2: 8b 42 74 mov 0x74(%edx),%eax
Code; c0219cdc <skb_drop_fraglist+1c/40>
5: 48 dec %eax
Code; c0219cdd <skb_drop_fraglist+1d/40>
6: 74 0a je 12 <_EIP+0x12>
Code; c0219cdf <skb_drop_fraglist+1f/40>
8: ff 4a 74 decl 0x74(%edx)
Code; c0219ce2 <skb_drop_fraglist+22/40>
b: 0f 94 c0 sete %al
Code; c0219ce5 <skb_drop_fraglist+25/40>
e: 84 c0 test %al,%al
Code; c0219ce7 <skb_drop_fraglist+27/40>
10: 74 07 je 19 <_EIP+0x19>
Code; c0219ce9 <skb_drop_fraglist+29/40>
12: 52 push %edx
Code; c0219cea <skb_drop_fraglist+2a/40>
13: e8 00 00 00 00 call 18 <_EIP+0x18>

<0>Kernel panic: Aiee, killing interrupt handler!

###############################################################

6) shell script:
no way

###############################################################

7) environment:
Dell Optiplex GX1 400MTbr+, Intel II 400 MHz, 320 MB RAM Adaptec AHA 2940UW as PCI-adapter with two hard drives (20GB and 4 GB, /boot is on the first scsi-drive) and a Plextor CD-writer onboard LAN (3com)
Promise Ultra133 TX2 as PCI-adapter with two Maxtor-drives (each 120GB)
DVD-ROM at the onboard-IDE

###############################################################

7.1) ver_linux:
Linux server01 2.4.23pre1-usbtest #1 Wed Aug 27 19:43:12 UTC 2003 i686 unknown unknown GNU/Linux

Gnu C                  3.3.1
Gnu make               3.80
util-linux             2.11z
mount                  2.11z
modutils               2.4.22
e2fsprogs              1.28
jfsutils               1.1.1
Linux C Library        x    1 root     root      1475331 Mar 27 21:39 
/lib/libc.so.6
Dynamic linker (ldd)   2.3.2
Procps                 3.1.6
Net-tools              1.60
Kbd                    1.06
Sh-utils               4.5.8
Modules Loaded         isa-pnp usbserial ipv6 nfsd autofs st sr_mod

sg mousedev joydev evdev input usb-uhci usbcore raw1394 ieee1394 3c59x ide-cd cdrom lvm-mod raid1 reiserfs aic7xxx

###############################################################

7.2) cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 2
cpu MHz : 398.780
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr
bogomips : 796.26

###############################################################

7.3) modules:

isa-pnp                30180   0 (unused)
usbserial              18332   0 (autoclean) (unused)
ipv6                  161172  -1 (autoclean)
nfsd                   65808   4 (autoclean)
autofs                 10100   1 (autoclean)
st                     27564   0 (autoclean) (unused)
sr_mod                 14680   0 (autoclean)
sg                     26540   0 (autoclean)
mousedev                4084   0 (unused)
joydev                  5728   0 (unused)
evdev                   4384   0 (unused)
input                   3328   0 [mousedev joydev evdev]
usb-uhci               21772   0 (unused)
usbcore                57664   1 [usbserial usb-uhci]
raw1394                17108   0 (unused)
ieee1394               42660   0 [raw1394]
3c59x                  26864   1
ide-cd                 30112   0 (autoclean)
cdrom                  26560   0 (autoclean) [sr_mod ide-cd]
lvm-mod                56192   6 (autoclean)
raid1                  12748   1 (autoclean)
reiserfs              182992   4
aic7xxx               139948   5

###############################################################

7.4) ioports, iomem:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vesafb
03f8-03ff : serial(auto)
0800-083f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI 0840-085f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI 0cf8-0cff : PCI conf1
cc00-cc7f : 3Com Corporation 3c905B 100BaseTX [Cyclone]
cc00-cc7f : 00:11.0
cca0-ccaf : Promise Technology, Inc. 20269
cca0-cca7 : ide0
cca8-ccaf : ide2
ccb8-ccbb : Promise Technology, Inc. 20269
ccba-ccba : ide2
ccc0-ccc7 : Promise Technology, Inc. 20269
ccc0-ccc7 : ide2
ccd0-ccd3 : Promise Technology, Inc. 20269
ccd2-ccd2 : ide0
ccd8-ccdf : Promise Technology, Inc. 20269
ccd8-ccdf : ide0
cce0-ccff : Intel Corp. 82371AB/EB/MB PIIX4 USB
cce0-ccff : usb-uhci
d000-dfff : PCI Bus #02
d800-d8ff : Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (#2) dc00-dcff : Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
e000-efff : PCI Bus #01
ec00-ecff : ATI Technologies Inc 3D Rage Pro AGP 1X/2X
ffa0-ffaf : Intel Corp. 82371AB/EB/MB PIIX4 IDE
ffa8-ffaf : ide1

00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cc7ff : Extension ROM
000d0000-000d7fff : Extension ROM
000d8000-000da7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-13ffffff : System RAM
00100000-002700a5 : Kernel code
002700a6-00301703 : Kernel data
f0000000-f3ffffff : Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
f5000000-f5ffffff : PCI Bus #02
f6000000-f6ffffff : PCI Bus #01
fa000000-fbffffff : PCI Bus #02
faffe000-faffefff : Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (#2)
faffe000-faffefff : aic7xxx
fafff000-faffffff : Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
fafff000-faffffff : aic7xxx
fc000000-feffffff : PCI Bus #01
fcfff000-fcffffff : ATI Technologies Inc 3D Rage Pro AGP 1X/2X
fcfff000-fcffffff : atyfb
fd000000-fdffffff : ATI Technologies Inc 3D Rage Pro AGP 1X/2X

    fd000000-fdffffff : atyfb

ff000000-ff003fff : Promise Technology, Inc. 20269 ff004000-ff00407f : 3Com Corporation 3c905B 100BaseTX [Cyclone] ffe00000-ffffffff : reserved

###############################################################

7.5) PCI:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-

	Latency: 64
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 1.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
 FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-

Rate=<none>

00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fc000000-feffffff
	Prefetchable memory behind bridge: f6000000-f6ffffff
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+

00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 32
	Region 4: I/O ports at ffa0 [size=16]

00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 14
Region 4: I/O ports at cce0 [size=32]

00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9

00:0e.0 Unknown mass storage controller: Promise Technology, Inc. 20269 (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc.: Unknown device 4d68
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 4500ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ccd8 [size=8]
Region 1: I/O ports at ccd0 [size=4]
Region 2: I/O ports at ccc0 [size=8]
Region 3: I/O ports at ccb8 [size=4]
Region 4: I/O ports at cca0 [size=16]
Region 5: Memory at ff000000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at f9000000 [disabled] [size=16K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-
,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev
03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 64, cache line size 08
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fa000000-fbffffff
	Prefetchable memory behind bridge: 00000000f5000000-00000000f5f00000
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-
,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+

00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
Subsystem: Dell Computer Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 64 (2500ns min, 2500ns max), cache line size 08
	Interrupt: pin A routed to IRQ 14
	Region 0: I/O ports at cc00 [size=128]
	Region 1: Memory at ff004000 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at f9000000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot-

,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) (prog-if 00 [VGA])
Subsystem: Dell Computer Corporation Optiplex GX1 Onboard Display
Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

	Latency: 64 (2000ns min), cache line size 08
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: I/O ports at ec00 [size=256]
	Region 2: Memory at fcfff000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [50] AGP version 1.0
		Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 
64bit- FW- AGP3- Rate=x1,x2
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-

Rate=<none>

02:0a.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (rev 03)

	Subsystem: Adaptec AHA-2940U/2940UW Dual
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2000ns min, 2000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 14
	Region 0: I/O ports at dc00 [disabled] [size=256]
	Region 1: Memory at fafff000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at fb000000 [disabled] [size=64K]

02:0a.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895 (rev 03)

	Subsystem: Adaptec AHA-2940U/2940UW Dual
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2000ns min, 2000ns max), cache line size 08
	Interrupt: pin B routed to IRQ 10
	Region 0: I/O ports at d800 [disabled] [size=256]
	Region 1: Memory at faffe000 (32-bit, non-prefetchable) [size=4K]

###############################################################

7.6) scsi:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DPSS-318350N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: QUANTUM Model: VIKING II 4.5WLS Rev: 5520
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02

###############################################################

7.7) other:
/proc/ide:
ide-cdrom version 4.59-ac1
ide-floppy version 0.99.newide
ide-disk version 1.17
ide-default version 0.9.newide

Ultra133 TX2 Chipset.

Controller: 0

Intel PIIX4 Ultra 33 Chipset.
--------------- Primary Channel ---------------- Secondary Channel ---
----------
enabled enabled
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------
DMA enabled: no no yes no

UDMA enabled: no no yes no

UDMA enabled: X X 2 X
UDMA
DMA
PIO

/proc/interrupts:
CPU0

  0:      37461          XT-PIC  timer
  1:        354          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  8:          2          XT-PIC  rtc
 10:         14          XT-PIC  aic7xxx
 11:       2334          XT-PIC  ide0, ide2
 12:         32          XT-PIC  PS/2 Mouse
 14:       8741          XT-PIC  aic7xxx, eth0, usb-uhci
 15:         28          XT-PIC  ide1
NMI:          0 
LOC:      37308 
ERR:          0
MIS:          0

Reiser FS:
reiserfsck 3.6.4 (2002 www.namesys.com)

Samba:
Version 2.2.8a-SuSE

###############################################################

Mit freundlichen Gruessen/Best regards,
Sebastian Piecha

EMail: [email protected]