Skip to contentSkip to conversation

device names

DISCUSSION James Courtier-Dutton 2 participants 2 messages Oct 19, 2003 – Oct 20, 2003

lore
Share & tools
lore
#0 lore raw

I have 2 sound cards.
To output to front speakers of card0 I can do: -
front
or
front:0

For Card1
front:1

But for iec958 on Card1 if fails.
What name should I use for Card1 for IEC958 spdif digital out?

conf.c: parse_args() Parameter AES3 must be an integer.
conf.c: snd_config_expand() Parse arguments error: Invalid argument.
pcm.c: snd_pcm_open_noupdate() Unknown PCM iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2:1.
audio_alsa_out: snd_pcm_open() of iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2:1 failed: Invalid argument
audio_alsa_out: >>> check if another program don't already use PCM <<<

Cheers
James

-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo
The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room http://www.enterpriselinuxforum.com

#1 lore raw
Quoted 12 lines · James Courtier-Dutton

I have 2 sound cards.
To output to front speakers of card0 I can do: -
front
or
front:0

For Card1
front:1

But for iec958 on Card1 if fails.
What name should I use for Card1 for IEC958 spdif digital out?

Quoted 6 lines

conf.c: parse_args() Parameter AES3 must be an integer. conf.c: snd_config_expand() Parse arguments error: Invalid argument. pcm.c: snd_pcm_open_noupdate() Unknown PCM iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2:1.
audio_alsa_out: snd_pcm_open() of iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2:1 failed: Invalid argument

The correct result would have been
iec958:CARD=1,AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2

Try using this (or "iec958:CARD=1") as device name.

HTH
Clemens

-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room
http://www.enterpriselinuxforum.com