negative timestamps on pcm?!?
All,
We've noticed a problem with the newest version of Alsa while doing some stress testing of our devices. Basically, the scenerio is we're playing through a large library of .ogg files over the weekend. When we checked on the progress upon getting in on Monday, we discovered that the PCM had ceased playing, and our ogg player had started a ton of instances (one for each song it was supposed to play) and couldn't play on any of them. Looking at /proc/asound/card0/pcm0p/sub0/status:
# cat status state: OPEN trigger_time: 642.000000000 tstamp : -1071072720.-1071072332 delay : 498 avail : -1072507698 avail_max : -1071072720 ----- hw_ptr : 26942906 appl_ptr : 26942906
It seems that our ogg player is set to blocking behavior and each one is blocked on the call to open the pcm. The intrieging thing is the timestamp is negative. It jumped out that this just looks wrong!
Hypothesis 1: After a really long time playing, the timestamp on the pcm wraps to negative. alsa can't handle this and blocks on the output.
It's no longer running, but is still in an OPEN state so nothing else
can open it. alsa should either use an unsigned value so large that it is impossable to overflow (???), use an unsigned and detect overflow and handle it gracefully, or use a signed value and detect the overflow/wrap and handle it. Hypothesis 2: We're barking up the wrong tree and the only thing wrong is that the proc entry is formmated poorly. (but even if that is the case, the problem still happens where after prolonged time alsa stops us).
This didn't happen with earlier versions of alsa using the same playing software.
I hope this helps the developers in tracking down any bugs.
Thanks,
- Steve
-------------------------------------------------------
This SF.net email is sponsored by OSDN developer relations Here's your chance to show off your extensive product knowledge We want to know what you know. Tell us and you have a chance to win $100
http://www.zoomerang.com/survey.zgi?HRPT1X3RYQNC5V4MLNSV3E54
At Mon, 20 Oct 2003 11:05:29 -0700,
Quoted 10 lines · Steve deRosier
All,
We've noticed a problem with the newest version of Alsa while doing some stress testing of our devices. Basically, the scenerio is we're playing through a large library of .ogg files over the weekend. When we checked on the progress upon getting in on Monday, we discovered that the PCM had ceased playing, and our ogg player had started a ton of instances (one for each song it was supposed to play) and couldn't play on any of them. Looking at
/proc/asound/card0/pcm0p/sub0/status:
Quoted 7 lines
# cat status state: OPEN trigger_time: 642.000000000 tstamp : -1071072720.-1071072332 delay : 498 avail : -1072507698 avail_max : -1071072720
when the state is OPEN, these values are bogus, since snd_pcm_status() returns immediately without putting the values.
Quoted 3 lines
-----
hw_ptr: 26942906appl_ptr: 26942906
they are real values.
i can't remember any reason of the restriction above. i think it's ok to remove it.
Quoted 4 lines
It seems that our ogg player is set to blocking behavior and each one is blocked on the call to open the pcm. The intrieging thing is the timestamp is negative. It jumped out that this just looks wrong!
Quoted 10 lines
Hypothesis 1: After a really long time playing, the timestamp on the pcm wraps to negative. alsa can't handle this and blocks on the output.
It's no longer running, but is still in an OPEN state so nothing else
can open it. alsa should either use an unsigned value so large that it is impossable to overflow (???), use an unsigned and detect overflow and handle it gracefully, or use a signed value and detect the overflow/wrap and handle it.
Hypothesis 2: We're barking up the wrong tree and the only thing wrong is that the proc entry is formmated poorly. (but even if that is the case, the problem still happens where after prolonged time alsa stops us).
at least, the values above make no sense.
which version of ALSA driver are you using?
Takashi
-------------------------------------------------------
This SF.net email is sponsored by OSDN developer relations Here's your chance to show off your extensive product knowledge We want to know what you know. Tell us and you have a chance to win $100
http://www.zoomerang.com/survey.zgi?HRPT1X3RYQNC5V4MLNSV3E54
Quoted 4 lines
when the state is OPEN, these values are bogus, since
snd_pcm_status()returns immediately without putting the values.
So, alsa writes bogus data to the proc entries? Maybe it shouldn't write bad data, just leave the spots blank, initilize with 0's or something else?
Quoted 11 lines
Quoted 3 lines
-----
hw_ptr: 26942906appl_ptr: 26942906they are real values.
i can't remember any reason of the restriction above. i think it's ok to remove it.
What restriction is that?
Quoted 9 lines
Quoted 6 lines
It seems that our ogg player is set to blocking behavior and each one is blocked on the call to open the pcm. The intrieging thing is the timestamp is negative. It jumped out that this just looks wrong!
Hypothesis 1: After a really long time playing, the timestamp on the pcm wraps to negative. alsa can't handle this and blocks on the output.
It's no longer running, but is still in an OPEN state so nothing else
can open it. alsa should either use an unsigned value so large that it is impossable to overflow (???), use an unsigned and detect overflow and handle it gracefully, or use a signed value and detect the overflow/wrap and handle it. Hypothesis 2: We're barking up the wrong tree and the only thing wrong is that the proc entry is formmated poorly. (but even if that is the case, the problem still happens where after prolonged time alsa stops us).at least, the values above make no sense.
Right, the values make no sense, but I think we've explained that away now. So, what is causing alsa to eventually stop playing right? Yes, that's not exactly a fair question... where should we start looking? Maybe a mutex, race condition, or an off-by-one error somewhere?
Quoted 3 lines
which version of ALSA driver are you using?
Driver: 0.9.7c
Library: 0.9.7
(retrieved from the website just a few days ago)
Thanks,
- Steve
-------------------------------------------------------
This SF.net email is sponsored by OSDN developer relations Here's your chance to show off your extensive product knowledge We want to know what you know. Tell us and you have a chance to win $100
http://www.zoomerang.com/survey.zgi?HRPT1X3RYQNC5V4MLNSV3E54
At Tue, 21 Oct 2003 10:05:26 -0700,
Quoted 9 lines · Steve deRosier
Quoted 5 lines
when the state is OPEN, these values are bogus, since
snd_pcm_status()returns immediately without putting the values.So, alsa writes bogus data to the proc entries? Maybe it shouldn't write bad data, just leave the spots blank, initilize with 0's or something else?
yes, it should be.
Quoted 6 lines
Quoted 6 lines
Quoted 4 lines
-----
hw_ptr: 26942906appl_ptr: 26942906
Quoted 8 lines
Quoted 6 lines
they are real values.
i can't remember any reason of the restriction above. i think it's ok to remove it.
What restriction is that?
i meant the check of pcm state in the proc read function. (i.e. to show the bogus values in the OPEN state)
Quoted 16 lines
Quoted 16 lines
Quoted 14 lines
It seems that our ogg player is set to blocking behavior and each one is blocked on the call to open the pcm. The intrieging thing is the timestamp is negative. It jumped out that this just looks wrong!
Hypothesis 1: After a really long time playing, the timestamp on the pcm wraps to negative. alsa can't handle this and blocks on the output.
It's no longer running, but is still in an OPEN state so nothing else
can open it. alsa should either use an unsigned value so large that it is impossable to overflow (???), use an unsigned and detect overflow and handle it gracefully, or use a signed value and detect the overflow/wrap and handle it.
Hypothesis 2: We're barking up the wrong tree and the only thing wrong is that the proc entry is formmated poorly. (but even if that is the case, the problem still happens where after prolonged time alsa stops us).
Quoted 6 lines
Quoted 1 line
at least, the values above make no sense.
Right, the values make no sense, but I think we've explained that away now. So, what is causing alsa to eventually stop playing right? Yes, that's not exactly a fair question... where should we start looking? Maybe a mutex, race condition, or an off-by-one error somewhere?
i thought it might be a mutex deadlock which was fixed in the recent version, but obviously you're using the enough new one.
the fact that it's in OPEN state implies that you can at least open this pcm device but it's not raised to the PREPARE state by some reason. at first, check the application at which point it's blocked.
Takashi
-------------------------------------------------------
This SF.net email is sponsored by OSDN developer relations Here's your chance to show off your extensive product knowledge We want to know what you know. Tell us and you have a chance to win $100
http://www.zoomerang.com/survey.zgi?HRPT1X3RYQNC5V4MLNSV3E54