HP CISS Driver in 2.4.22 with ac-4 patchset
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
following: we have a HP DL360 Box here which has a HP Smart Array Controler inside. Because I wanted to have my own kernel config I decided to with 2.4.22-ac4. but after boot and loading the HP CISS driver (compiled into kernel) he stuck at the point of
...
HP CISS Driver (v 2.4.47)
...
Partition check:
cciss/c0d0:
nothing comes more. So I compiled 2.4.22 without the ac-4 patchset and voila, it works fine.
...
HP CISS Driver (v 2.4.47)
cciss: Device 0xb178 has been found at bus 0 dev 4 func 0
blocks= 35553120 block_size= 512
heads= 255, sectors= 32, cylinders= 4357 RAID 1(0+1)blk: queue c041b220, I/O limit 4294967295Mb (mask 0xffffffffffffffff) Partition check:
cciss/c0d0: p1 p2 p3 p4 < p5 p6 >
...
I don't know exactly what the changes are from 22 to 22-ac4 but there is at least the monitor threads added. I also tried 23-pre8 and there it also works.
configs bz2 & attached
- --
Clemens Schwaighofer - IT Engineer & System Administration
==========================================================
Tequila Japan, 6-17-2 Ginza Chuo-ku, Tokyo 104-8167, JAPAN
Tel: +81-(0)3-3545-7703 Fax: +81-(0)3-3545-7343
http://www.tequila.jp
==========================================================
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQE/nfXzjBz/yQjBxz8RAl5sAKDZ9p/DX3u4WYyNksO9qCffSYE6dQCfW490 ptq+nqFYETN8cEHKInzhgaY=
=g7Ff
-----END PGP SIGNATURE-----