linuxppc_2_4_mpc5200 / 5200lite first day conclusions
I have spent a long day hacking and got it
running with by brand new lite5200 EVB
Just for others there is little summary of my experiencies
- Macraigor Wiggler/ocd_cmdr does not yet support mpc5200
so there is no low cost ocd tool ( or least i have not found one ) The COP tools are not compatoble between processors
when there seems to be relativelly good compatibility between BDM tools based least on experience with MPC8xx and MPC555 series
---> continue searching low cost tool or just wait ...... or hack one
without motorola specs
- It looks like that it is not so easy any more compile non u-boot version of kernel. Make zImage gives one compilation error mentioned and does not even work after it.
---> Easiest way is to move to u-boot
- With u-boot Wolfgang Denk give advice to make ram loadable version. I just did not find easy instructions to make it.
--> Find out to change TEXT_BASE from board/icecube/config.mk
Notice also that there is in icecube.c CFG_RAMBOOT that needs to be defined in icecube.h that it works in RAM
with these modifications it work in RAM
-- Compile u-boot flashable version. Even it
is vompiled for 0xff800000 base address it looks a like that it needs still CFG_RAMBOOT if it is started from dbug with go ff800100
-- Now you can get kernel booting from uboot with
tftpboot 200000 uImage
bootm 200000
- Try to meke your own ramdisk image. There is still in uboot manual pages just mentioned "old wau" , read kernel Documentation/initrd.txt . The way i used to do it does not work any more. uboot just saus invalid magic number. Try found out what is wrong
-- > Find out that it needs new utility to make u-boot
compatible header
./u-boot-1.0.0/tools/mkimage -n 'Kates ramdisk' -A ppc -O linux -T ramdisk -C gzip -d initrd.gz initrd.image
- Got kernel died with "cant fork init",
-->find out that your old linux kernel utilities, busybox, init jne are no longer copmpatible with libraries, make or find new set
Looks a like that it is doable but it needs lot of time and once again "reverse documentation read" that is that found first a solution and then you find documentation ......
May be good step by step instructions are needed someones that won't spend all day long hacking
-- After midnight you are hungry, tired and five cats and dog are asking food
--> feed them and go to sauna ... ;)
Kate
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Quoted 4 lines · In message <[email protected]> you wrote:
- It looks like that it is not so easy any more compile non u-boot version of kernel. Make zImage gives one compilation error mentioned and does not even work after it.
zImage requires a Linux bootstap loader; this has not been
implemented (yet). We use U-Boot so we don't need it.
Quoted 1 line
---> Easiest way is to move to u-boot
Right :-)
Quoted 3 lines
- With u-boot Wolfgang Denk give advice to make ram loadable version. I just did not find easy instructions to make it.
We do NOT recommend to use a U-Boot version booting from RAM; you can do this if you really want and if you know what you're doing; what we recommend is to use the standard version and install it instead of the original bootloader.
Quoted 4 lines
-- Compile u-boot flashable version. Even it
is vompiled for0xff800000base address it looks a like that it needs stillCFG_RAMBOOTif it is started from dbug with goff800100
Building a low-boot configuration requires more than just modifying the flash base address.
Quoted 5 lines
- Try to meke your own ramdisk image. There is still in uboot manual pages just mentioned "old wau" , read kernel
Documentation/initrd.txt. The way i used to do it does not work any more. uboot just saus invalid magic number. Try found out what is wrong
Start reading the U-Boot manual at
http://www.denx.de/twiki/bin/view/DULG/Manual
You can find pre-built ramdisk images for testing at
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/SELF/images/ (use the ppc_82xx version for the MPC5200).
Quoted 3 lines
- Got kernel died with "cant fork init",
-->find out that your old linux kernel utilities, busybox, init
jne are no longer copmpatible with libraries, make or find new set
You must have done something wrong when building the ramdisk image. This works fine for me.
Quoted 3 lines
Looks a like that it is doable but it needs lot of time and once again "reverse documentation read" that is that found first a solution and then you find documentation ......
Please feel free to contribute to the DULG
(http://www.denx.de/twiki/bin/view/DULG/Manual).
This is a wiki, so everybody can help improving it.
Quoted 2 lines
May be good step by step instructions are needed someones that won't spend all day long hacking
Maybe you can point out what is mussing in the DULG, and we add it?
Quoted 3 lines
-- After midnight you are hungry, tired and five cats and dog are asking food
--> feed them and go to sauna ... ;)
I guess I know how that feels (even without cats or dogs).
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected] On the subject of C program indentation: "In My Egotistical Opinion, most people's C programs should be indented six feet downward and
covered with dirt." - Blair P. Houghton
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/