USB-keyboard not recognized when not connected during startup
Please CC, I'm not subscribed.
I use an USB-keyboard via an USB-switchbox on 2 computers (PC and Mac). When I boot into Windows or MacOS9 it doesn't matter whether my USB is connected, the keyboard gets recognized when the connection happens. Not so on Linux (PC), there the keyboard gets only recognized if it's connected during startup. If I forget to switch the keyboard to the PC before I start Linux, it isn't recognized and unusable. This is mostly annoying because I can't get rid of my AT-keyboard and just use the USB-keyboard, a none working keyboard is identical to a system crash! When the USB-keyboard is connected during startup everything is okay.
I've seen this behavior with my Debian (sarge) system running my own built kernel 2.4.21 with USB input and keyboard drivers compiled in. I also see this problem when running Knoppix live CD, therefore it's common to any Debian based system, probably to any Linux system.
Is this problem, not recognizing an USB-keyboard when not connected during startup, know and is there a solution for it? Is there a solution in the upcoming 2.6 kernel?
If anyone wants to test this and has a desktop system with USB, just disconnect your normal keyboard, start the system and connect an USB-keyboard after the login prompt is shown. You could use the keyboard of a Mac if you don't have any. Also your kernel has to have USB-input/USB-HID and USB-keyboard support compiled in.
O. Wyss
Signature · 1 line
See "http://wxguide.sourceforge.net/" for ideas how to design your app
Quoting Otto Wyss <[email protected]>:
Quoted 21 lines
Please CC, I'm not subscribed.
I use an USB-keyboard via an USB-switchbox on 2 computers (PC and Mac). When I boot into Windows or MacOS9 it doesn't matter whether my USB is connected, the keyboard gets recognized when the connection happens. Not so on Linux (PC), there the keyboard gets only recognized if it's connected during startup. If I forget to switch the keyboard to the PC before I start Linux, it isn't recognized and unusable. This is mostly annoying because I can't get rid of my AT-keyboard and just use the USB-keyboard, a none working keyboard is identical to a system crash! When the USB-keyboard is connected during startup everything is okay.
I've seen this behavior with my Debian (sarge) system running my own built kernel 2.4.21 with USB input and keyboard drivers compiled in. I also see this problem when running Knoppix live CD, therefore it's common to any Debian based system, probably to any Linux system.
Is this problem, not recognizing an USB-keyboard when not connected during startup, know and is there a solution for it? Is there a solution in the upcoming 2.6 kernel?
Quoted 7 lines
If anyone wants to test this and has a desktop system with USB, just disconnect your normal keyboard, start the system and connect an USB-keyboard after the login prompt is shown. You could use the keyboard of a Mac if you don't have any. Also your kernel has to have USB-input/USB-HID and USB-keyboard support compiled in.
O. Wyss
Have you tried installing hotplug? That should automatically load the modules/devices needed when you plug it in after boot.
-sandalle
Signature · 17 lines
PGP Key Fingerprint: FCFF 26A1 BE21 08F4 BB91 FAED 1D7B 7D74 A8EF DD61 http://search.keyserver.net:11371/pks/lookup?op=get&search=0xA8EFDD61 -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GCS/E/IT$ d-- s++:+>: a-- C++(+++) BL++++VIS>$ P+(++) L+++ E-(---) W++ N+@ o? K? w++++>-- O M-@ V-- PS+(+++) PE(-) Y++(+) PGP++(+) t+() 5++ X(+) R+(++) tv(--)b++(+++) DI+@ D++(+++) G>+++ e>+++ h---(++) r++ y+ ------END GEEK CODE BLOCK------ Eric Sandall | Source Mage GNU/Linux Developer [email protected] | http://www.sourcemage.org/ http://eric.sandall.us/ | SysAdmin @ Inst. Shock Physics @ WSU http://counter.li.org/ #196285 | http://www.shock.wsu.edu/ ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
Quoted 8 lines · Eric Sandall
Quoting Otto Wyss <[email protected]>:
Quoted 2 lines
Please CC, I'm not subscribed.
Have you tried installing hotplug? That should automatically load the modules/devices needed when you plug it in after boot.
Of course I use hotplue and so probably does Knoppix. I'll try Morphix but I'm quiet sure it also shows this problem. This is a worse USB bug in kernel 2.4.21 and I'm not sure if it's fixed in one of the later ones.
O. Wyss
Signature · 1 line
See "http://wxguide.sourceforge.net/" for ideas how to design your app
Quoted 11 lines · Otto Wyss
Please CC, I'm not subscribed.
I use an USB-keyboard via an USB-switchbox on 2 computers (PC and Mac). When I boot into Windows or MacOS9 it doesn't matter whether my USB is connected, the keyboard gets recognized when the connection happens. Not so on Linux (PC), there the keyboard gets only recognized if it's connected during startup. If I forget to switch the keyboard to the PC before I start Linux, it isn't recognized and unusable. This is mostly annoying because I can't get rid of my AT-keyboard and just use the USB-keyboard, a none working keyboard is identical to a system crash! When the USB-keyboard is connected during startup everything is okay.
Do you have something like "USB Legacy support" enabled in your BIOS? Or it might be called something else. Try disabling that.
Good luck,
greg k-h
Quoted 5 lines · Greg KH
Please CC, I'm not subscribed.
Quoted 1 line
Do you have something like "USB Legacy support" enabled in your BIOS? Or it might be called something else. Try disabling that.
No, there is no "USB Legacy support".
O. Wyss
Signature · 1 line
See "http://wxguide.sourceforge.net/" for ideas how to design your app