Skip to contentSkip to conversation

Silicon Image 3112A SATA trouble

DISCUSSION Luis Miguel García 3 participants 3 messages Nov 30, 2003

lore
Share & tools
lore
#0 lore raw

hello:

I have a Seagate Barracuda IV (80 Gb) connected to parallel ata on a nforce-2 motherboard.

If any of you want for me to test any patch to fix the "seagate issue", please, count on me. I have a SATA sis3112 and a parallel-to-serial converter. If I'm of any help to you, drop me an email.

By the way, I'm only getting 32 MB/s (hdparm -tT /dev/hda) on my actual parallel ata. Is this enough for an ATA-100 device?

Thanks a lot.

LuisMi García
Spain

#1 lore raw

On the topic of speeds.. hdparm -t gives me 56Mb/s on my Maxtor 80Mb 8mb cache PATA drive. I got that with 2.4.23 pre 8 which was ATA100 and get just a little more on ATA133 with 2.6. Not sure what people are expecting on SATA.

Craig

Quoted 23 lines · Luis Miguel García

hello:

I have a Seagate Barracuda IV (80 Gb) connected to parallel ata on a nforce-2 motherboard.

If any of you want for me to test any patch to fix the "seagate issue", please, count on me. I have a SATA sis3112 and a parallel-to-serial converter. If I'm of any help to you, drop me an email.

By the way, I'm only getting 32 MB/s (hdparm -tT /dev/hda) on my
actual parallel ata. Is this enough for an ATA-100 device?

Thanks a lot.

LuisMi García
Spain

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
Quoted 4 lines · Craig Bradney

On the topic of speeds.. hdparm -t gives me 56Mb/s on my Maxtor 80Mb 8mb cache PATA drive. I got that with 2.4.23 pre 8 which was ATA100 and get just a little more on ATA133 with 2.6. Not sure what people are expecting on SATA.

Serial ATA merely changes the bus, a.k.a. the interface between drive and system.

This doesn't mean that the drive itself will be any faster... most first-gen SATA drives are just PATA drives with a new circuit board and new firmware. Just like some SCSI and IDE drives are exactly the same platters, but have differing circuit boards and connectors...

Jeff