Skip to contentSkip to conversation

max SNDRV_CARDS bug ? questions ....

DISCUSSION Benno Senoner 2 participants 3 messages Dec 3, 2003

lore
Share & tools
lore
#1 lore raw
In reply to Benno Senoner

At Wed, 03 Dec 2003 20:00:05 +0100,

Quoted 11 lines · Benno Senoner

Hi,
(I'm using alsa-driver-1.0.0rc1)

I have a question about the SNDRV_CARDS.
normally it is defined as 8
./alsa-kernel/core/memalloc.c: #define SNDRV_CARDS 8

Does that mean we can have a maximum of 8 soundcards
in the PC or is this simply how many instances a certain module supports ? (eg I could have 8 emu10k instances, 8 sb16 instances etc ?).

no, totally 8 instances. not the number of modules.

Quoted 7 lines

Plus I noticed something in

./alsa-kernel/core/memalloc.c: static int enable[8] = {[0 ... (SNDRV_CARDS-1)] = 1};

shouldn't that be:
static int enable[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 1}; ?

yes, but not a bug as long as SNDRV_CARDS = 8 :)

Quoted 1 line

is this a bug ? what happens if we set SNDRV_CARDS to a value > 8 ?

more than 8 cards are not supported in the current assignment of devices. the minor devices will be out of range.

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/

#0 lore raw

Hi,
(I'm using alsa-driver-1.0.0rc1)

I have a question about the SNDRV_CARDS.
normally it is defined as 8
./alsa-kernel/core/memalloc.c: #define SNDRV_CARDS 8

Does that mean we can have a maximum of 8 soundcards
in the PC or is this simply how many instances a certain module supports ? (eg I could have 8 emu10k instances, 8 sb16 instances etc ?).

Plus I noticed something in

./alsa-kernel/core/memalloc.c: static int enable[8] = {[0 ... (SNDRV_CARDS-1)] = 1};

shouldn't that be:
static int enable[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 1}; ?

is this a bug ? what happens if we set SNDRV_CARDS to a value > 8 ?
Does this generate memory corruption problems ?
(keep in mind I'm not familiar with the alsa-driver sourcebase so I could say nonsense)

I grepped the entire source for 'enable[' and the only place where I found enable[8] was in the ./alsa-kernel/core/memalloc.c file.

Basically the reason why I wrote this mail is to ask if I can use more than 8 snd-serialmidi devices.
Takashi gave me the module parameter options to make it work. (BTWthanks Takashi ! :-) )

options snd-serialmidi enable=1,1,1,1 sdev=/dev/ttyS2,/dev/ttyS3,/dev/ttyS4,/dev/ttyS5

but if you look at the drivers/serialmidi.c source
....
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE;static char *sdev[SNDRV_CARDS] = {"/dev/ttyS0", [1 ... (SNDRV_CARDS - 1)] = ""};
....

all arrays are of size SNDRV_CARDS this means that I can have max 8 serial devices. So what do you suggest to allow for example 12 serial midi devices ? (via multi port serial card). just set SNDRV_CARDS to 12 and fix the enable[8] statement in memalloc.c ?

Or should I simply use a local SNDRV_CARDS in serialmidi.c ? (eg #define SERIAL_SNDRV_CARDS 12) ? (the latter is a hack so I guess it's more convenient to change the global SNDRV_CARDS define right ?).

I posted this mail just to be sure that alsa does not becomes unstable or something breaks because of the define change.

Let me know please.

thanks,
Benno
http://www.linuxsampler.org

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/

#2 lore raw

Re: Max # of cards, pcm devices, midi devices Was: max SNDRV_CARDS bug ? questions ....

In reply to Takashi Iwai
Quoted 11 lines · Takashi Iwai

At Wed, 03 Dec 2003 20:00:05 +0100,

Quoted 7 lines · Benno Senoner

Hi,
(I'm using alsa-driver-1.0.0rc1)

I have a question about the SNDRV_CARDS.
normally it is defined as 8
./alsa-kernel/core/memalloc.c: #define SNDRV_CARDS 8

Quoted 8 lines
Quoted 5 lines

Does that mean we can have a maximum of 8 soundcards
in the PC or is this simply how many instances a certain module supports ? (eg I could have 8 emu10k instances, 8 sb16 instances etc ?).

no, totally 8 instances. not the number of modules.

Please elaborate here: does that mean that if I have 3 soundcards (eg. 3 emu10k1 cards) and 6 snd-serialmidi devices ( = total of 9 "cards"), that this configuration does not work ?

Quoted 11 lines
Quoted 8 lines

Plus I noticed something in

./alsa-kernel/core/memalloc.c: static int enable[8] = {[0 ... (SNDRV_CARDS-1)] = 1};

shouldn't that be:
static int enable[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 1}; ?

yes, but not a bug as long as SNDRV_CARDS = 8 :)

Then I see no reason not to fix it, or at least place a big FIXME in the sources near the SNDDRV_CARDS definition.
Otherwise when these SNDRV_CARDS limits will be lifted someday developes will need to fix these nasty fixed array size assumption.

Quoted 10 lines
Quoted 6 lines

is this a bug ? what happens if we set SNDRV_CARDS to a value > 8 ?

more than 8 cards are not supported in the current assignment of devices. the minor devices will be out of range.

I did look at /dev/snd:

devicename, maj, min

/dev/snd/midiC0D0 116, 8 /dev/snd/midiC0D1 116, 9
....
/dev/snd/midiC0D7 116,15

/dev/snd/pcmC0D0p 116, 16

/dev/snd/pcmC0D1c  116,25
/dev/snd/pcmC0D1p  116,17
/dev/snd/pcmC0D2c  116,26

...

Is that the minor devices conflict you are refering to ?
I assume the midi serial devices allocate a /dev/snd/midiC0Dx device thus only 8 midi ports per card are allowed.
After midiC0D7 (116,15) comes pcmC0D0p (116, 16) so there would be no room for midiC0D8, right ?

The question is now: is it possible to change the device major,minor number layout to allow for more /dev/snd/midiCxDy devices (and simultaneously increasing SNDRV_CARDS) ?

Is it simply a matter of changing the snddevices script or does alsa-driver/alsa-lib make assumptions about the devicenode numbers thus rendering such modifications useless ?

About the minor number:
I understand it is limited to 1 byte thus has a 0-255 range.
I did look at the snddevices script and it seems that every card uses 32 minor numbers thus 32 * 8 cards = 256 = full range used.
Even if the script only creates the device nodes for the first 4 cards (thus minor numbers 0-127) I assume you can redefine MAX_CARDS in the script and create the device nodes for all 8 cards.

in
./alsa-kernel/include/minors.h I see:

#define SNDRV_MINOR_DEVICES             32
#define SNDRV_MINOR_CARD(minor)         ((minor) >> 5)
#define SNDRV_MINOR_RAWMIDI             8       /* 8 - 15 */
#define SNDRV_MINOR_RAWMIDIS            8
#define SNDRV_MINOR_PCM_PLAYBACK        16      /* 16 - 23 */
#define SNDRV_MINOR_PCM_CAPTURE         24      /* 24 - 31 */
#define SNDRV_MINOR_PCMS                8

So basically as far as I understand those macros would need to to be changed too. I see PCM_PLAYBACK and PCM_CAPTURE each taking up 8 device nodes each. Perhaps I could reduce that to 4 thus making room for 2*4=8 more RAWMIDI devices ? (but these are per card so I guess that is the wrong way to go, read below)

The question how many multiple PCM_PLAYBACK devices are usually needed ?
Of course this depends from the card. For example for my CMI8738MC6 card
in /proc/asound I see: pcm0c, pcm0p, pcm1p, pcm2c, pcm2p
thus 3 devices each for playback and capture.
What happens in the case of the hammerfall where you can have up to 24 playback channels ? Is that seen as a single capture/playback device ? Or cards like the delta 1010 ? Ok the good old Steve Harris just did a cat /proc/asound/ on his Hammerfall box for me:
id, oss_mixer, pcm0c, pcm0p, rme9652
So it means it uses only one pcm device.

But the big doubt is: since Takashi said each snd_serialmidi device allocates one of the available SNDRV_CARDS slots it basically means that we use only one midiCxDy per card.
If I use the module options line Takashi gave me

options snd-serialmidi enable=1,1,1,1 sdev=/dev/ttyS2,/dev/ttyS3,/dev/ttyS4,/dev/ttyS5

and I do aconnect I get something like

72:0  Serial Midi Device 1  (or was the name Raw Midi ? does not matter for explanation purposes).
80:0  Serial Midi Device 2
88:0  ....

So I assume of each "card" only /dev/snd/midiCxD0 is used.
Correct me if I'm wrong.
To make it short, do you think I have a chance to succeed increase SNDRV_CARDS to 12-16
(and change the snddevices script and the SNDRV_ macros) ?
Must each card use a power of two (currently 32) of minor device nodes ?
If that is true then the only alternative would be SNDRV_CARDS = 16 but that would leave only 16 minor numbers for card which is too little to make fit a few pcm devices, rawmidi and the other stuff neded. Perhaps the ideal tradeoff would be SNDRV_CARDS=12 but that would require a per card
minor device number that is not a power of two.
Ok some macros would become a bit slower eg (assuming 20 minor ids per card)

#define SNDRV_MINOR_CARD(minor) ((minor) / 20)

But this is not the end of the world.

Let me know please. I'll share my experiences (problems, failures, success etc) here on the mailing list.

thanks,
Benno
http://www.linuxsampler.org

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/