tecra 8100 / ymfpci
hi --
The appended has been moderating for a few weeks.
The funny thing is the other night I had 2.6.0-test11 playing sounds as
clear as could be for a while. But it has since, after miscellaneous reonfigs and reboots, reverted to making scratchy noises only.
Getting toshiba specific acpi extensions, as in using the planet ccrma
2.4.2-6.ll.rh90 kernel, didn't solve the problem for me either. Perhaps SuSe tweaked the toshiba_acpi extensions?
But it seems likely, still, that the toshiba specific acpi may be
banging bits in registers near or overlapping the ymfpci assignments, or that there's a power saver setting that semi-mutes the sound chip.
Hope this helps. I'll probably stumble through getting the alsa
cvs version compiled in a day or two.
- rec --
Quoted 9 lines
Greetings --
I was just checking on this, again, since I have yet another Tecra
8100 for Alsa to fail to work on. I see that there was a success back in July under 0.9.5 (kernel unspecified), but I'm running the planet ccrma alsa-driver-0.9.6-2 and there's still nothing but static coming out of the speakers here.But, I also noticed the following post over at linuxquestions.org
from 11-Nov-2003 which suggests that the problem is in the toshiba specific power mgmt. Apparently, on some current SuSe releases the Alsa driver works on the Tecra 8100 between the install and the first reboot, then produces static. Talk about your unrewarding bug to work on.
Quoted 47 lines
None of this helps me, I'm running kernel-2.4.20-20.1.caps.rh90 from
planet ccrma, and there are notoshiba_acpimodules to be found.Yet, I get the feeling that this bug may be reaching its expiration date.
-- rec --
Quoted 40 lines
Last edited by shutterbug on 11-11-2003 at 01:56 AM
Quoted 34 lines
Toshiba 8100 laptop sound on SuSE 9.0 ( post #6)
_It's interesting.
Sound works properly after installation and before first boot. After that, sound is just crackles and clicks.
Here is a solution for SuSE 9.0.If you are good at the command line:
Login as root.
Edit the file/etc/sysconfig/powermanagement.
Look for the line that starts withACPI_MODULES.
Change the line so that it says this:
ACPI_MODULES="ac battery button fan processor thermaltoshiba_acpi" Then exit,_save, and reboot.Or if you prefer a GUI:
Run the YaST2 program.
Click on System in the left panel.
Click on "Editor for/etc/sysconfigFiles" in the right panel. In left panel of resulting Configuration Options screen, click to open up (make visible) System, Powermanagement, ACPI, General,ACPI_MODULES.
In right panel replace Setting of:ACPI_MODULES
to be:
ac battery button fan processor thermaltoshiba_acpiThen click Finish to close Configuration Options screen. Then click Close to close the YaST program.Using either method, the only part of the settings that were missing for my Toshiba 8100 laptop was "
toshiba_acpi".I rebooted and the sound problems disappeared.
IF FACT... the sound worked after initial installation and before first reboot, but even then it was pretty bad. Now the sound is quite good.
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
Greetings --
The alsa ymfpci drivers haven't worked on toshiba tecra 8100's
since 0.5. But the OSS drivers derived from the 0.5 alsa drivers work fine. This is a non-deterministic problem in 1.0.0.rc2.
I've found that I can switch the ymfpci on or off by
repeatedly starting/aplaying/stopping the alsa sound system. About one time in 3, 4, 5, or more, the sound chip will work, all the other times I get static out of the speakers.
Specifically, all I'm doing is looping over:
/etc/init.d/alsasound start
aplay /usr/share/sounds/startup3.wav
/etc/init.d/alsasound stop
and most times through the loop I hear static, but sometimes I hear startup3.wav played instead.
/sbin/lspci -vvxxs <ymfpci bus address> produces identical output
in all cases: alsa producing sound, alsa producing static, or old oss driver producing sound, the lspci run in each case after the aplay/play was finished.
I have the current Planet CCRMA kernel-2.4.23.ll, alsa drivers
(1.0.0.rc2), and source installed. I can run any with/without comparisons that might be useful, or compile patches, or whatever.
(This kernel, by the way, only boots with the options pci=noacpi
or acpi=off, otherwise the boot hangs when initializing the pcmcia slots. This goes for 2.6.0 and any other acpi enabled kernel that I've tried on the tecra 8100.)
-- rec --
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/