Skip to contentSkip to conversation

NForce2 pseudoscience stability testing (2.6.0-test11)

DISCUSSION [email protected] 1 participant 1 message Dec 4, 2003

lore
Share & tools
lore
#0 lore raw

Prakash Cheemplavam wrote

Quoted 15 lines
Quoted 4 lines
Quoted 4 lines

Thanks everyone for your continued interest in this, I'll try and test the no-onboard-PATA + UP LAPIC and IOAPIC and add-in-card-PATA with no onboard PATA + + UP LAPIC and IOAPIC when I get a spare moment which is rare.

I don't think that the AMD IDE is the problem. I have compiled it in, as
well, but I am using the onboard SATA. Since this can be considered as >an pci-card (the chip is connected to the pci bridge) I think ölocking occurs on high traffic on PCI bus. Like now I get over 60mb/s with my >HD. Formerly I got only 25mb/s. before I could do some rounds of hdparm -t, before it locks. Now it locks immediately when doing hdparm -t when APIC is enabled.

Quoted 5 lines

SO, I think it is not IDE specific. Does anybody have gigabit network card? Maybe that we should try to push something big through it (without reading from hd). If that leads to lock up we have a semi proof that it is due to high traffic on pci-bus.

I was thinking that myself (PCI activity triggering this). The first time I hit this problem was with a card with two ACENics/tigon2 (acenic.o) sniffing traffic at high rates (100,000pps+) with most file i/o going over NFS on the integrated 3com interface.

I ran for three days 200,000+pps sniffing with tethereal on windows2000 on both acenics and never a lockup.

The AMD-Nvidia PATA does seem to be a very common in this problem, but everyone at least has a CD-ROM and most have a PATA hard disk so its going to be there every time a problems crops up. I think we need to prove that an solid add-in PCI PATA card that takes the CD and the and the PATA disk and shut off the onboard ATA and torture test again. I havent had time to yet.