Skip to contentSkip to conversation

NForce2 pseudoscience stability testing (2.6.0-test11) - IRQ flood related ?

DISCUSSION [email protected] 1 participant 1 message Dec 5, 2003

lore
Share & tools
lore
#0 lore raw

I have almost everything disabled and the error occurs.

USB1 OFF
USB2 OFF
FireWire OFF
SATA - Jumpered OFF
AUDIO OFF
NVIDIA LAN OFF.

lspci
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4) 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) 00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev a3) 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) 01:07.0 Ethernet controller: Digital Equipment Corporation Farallon PN9000SX (rev 01)
01:08.0 Ethernet controller: Digital Equipment Corporation Farallon PN9000SX (rev 01)
02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast Ethernet Controller (rev 40)
03:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2)

Thats it. And this think locks anytime APIC is enabled. Its just a matter of time.

Bob wrote

Quoted 65 lines

(2.6.0-test11) - IRQ flood related ?

Do you have onboard ethernet enabled with nforce2 mboard? I am fine with pre-emptive kernel but have to disable onboard ethernet in cmos setup or I see "Disabling IRQ7" and problems develop.

-Bob

Quoted 3 lines · Craig Bradney

Prakash,

try it without preempt.. just to see. As soon as I removed it

today the

Quoted 31 lines

crashes went away (for 5 hours).. PC is now up for 2.5 hours and I'm waiting to see if it will be 5 hrs or 5 days this time around :)

Craig

Quoted 23 lines · Prakash K. Cheemplavam
Quoted 20 lines · Jesse Allen

On Thu, Dec 04, 2003 at 09:02:08PM +0100,

Quoted 6 lines

Hello,

Along with the lockups already described here, I've noticed an unidentified source of interrupts on IRQ7.

...

Quoted 4 lines

I wonder if people experiencing lockup problems also have these noise interrupts,

I just took a look at this, by setting up parport_pc, and

yes I get noise.

Quoted 8 lines
Quoted 8 lines
Quoted 5 lines

This was my first sample with a kernel with APIC:
7: 29230 IO-APIC-edge parport0

I just did an experiment with a very light kernel, nearly nothing compiled inside, except apic acpi, preempt and needed stuff plus scsi+libata and no ide. IRQ 7 was not present and every

device had its

Quoted 6 lines
Quoted 5 lines

own irq. Nevertheless system locked up at second hdparm run...

Prakash