Catching NForce2 lockup with NMI watchdog
Quoted 8 lines
Everyone with this problem should turn on the
nmi_watchdog, as someone may
have the right circumstances to produce an oops where the others didn't.I say that you're not serious about getting this fixed unless you're going
to do all of:
To quote Allen Martin:
Quoted 10 lines
NVIDIA doesn't provide a windows driver to setup APIC interrupts.
APIC functionality is exported through the ACPI methods and MP table in the system BIOS which the motherboard vendors supply.
Likely the root of the problem has to do with the way the Linux kernel is using the ACPI methods to setup the interrupts which is different from win 9x/2k/XP. I can help track this down, unfortunately so far I've been unable to reproduce the hangs on any of the boards I have.
and
Quoted 9 lines
Quoted 8 lines
Do you know whether the nforce2's with apic support the timer (IRQ 0) in
IO-APIC mode? To me, it seems like a bug:
"Dec 4 20:13:11 tesore kernel: ..MP-BIOS bug: 8254 timer not connected to
IO-APIC"
(This message originates inarch/i386/kernel/io_apic.c)
Quoted 3 lines
Yes, Win 9x/2k/XP use the system timer on irq0 and have no problem. I haven't looked at this yet.
Is it not possible that Linux could be made to handling this hardware correctly?
Quoted 20 lines
o turn on
nmi_watchdog
o try the patches posted[1]
o contact nvidia or your motherboard manufacturer saying you need linux
support, and return the board if they don't. (phone, fax,
email, or even
local office if there is one)I bought a VIA board to avoid the problems I expected from the nforce, and I
needed a system (server) that would *work* now.[1] If you're worried about your file system, just boot the patched kernel in
single mode, and that will mount all of your file systems read-only so there
will be little chance of corruption.Mike