accessing a internal port fowarded email server from the internal network
Hi all,
I have a problem which I thought I'd seen the solution so somewhere, but I just can't find the posting anymore.
I have an iptables firewall, and I port forward to an internal email server on a 192.168.10.0/24 LAN network.
This all works fine, external email comes & goes OK. My problem is that I want to allow internal network users to address the email server using the external IP address of the firewall.
Currently, laptop users internal to the network need to then become external when they work external to the LAN, and they have to either setup 2 different email accounts (one using the internal email server IP address, and one using the external IP address), or they have to remember to change their server settings each time they move from internal to external and vice-versa. Both of these are a pain for them.
I have attempted to allow this to work by using the following prerouting rules & forward rules (default policies are DROP, DROP, ACCEPT)
iptables -t nat -A PREROUTING -p tcp --dport 25 -j DNAT --to 192.168.10.12:25 iptables -t nat -A PREROUTING -p tcp --dport 110 -d -j DNAT --to 192.168.10.12:110 iptables -t nat -A PREROUTING -p tcp --dport 143 -d -j DNAT --to 192.168.10.12:143
iptables -A FORWARD -p tcp -s 0/0 -d 192.168.10.12/32 --destination-port 25 --syn -j ACCEPT iptables -A FORWARD -p tcp -s 0/0 -d 192.168.10.12/32 --destination-port 110 --syn -j ACCEPT iptables -A FORWARD -p tcp -s 0/0 -d 192.168.10.12/32 --destination-port 143 --syn -j ACCEPT
These are just more generalised rules that people commonly use for doing port forwarding - I have just made them less strict by taking about the input & output constraints in an attempt to allow external & internal clients to access the email server via the external ip.
It doesn't work, the email client just times out, as if I'm still blocking some part of the data stream. What am I doing wrong ?
thanks.
-Tim
Quoted 11 lines · TN
Hi all,
I have a problem which I thought I'd seen the solution so somewhere, but I just can't find the posting anymore.
I have an iptables firewall, and I port forward to an internal email server on a 192.168.10.0/24 LAN network.
This all works fine, external email comes & goes OK. My problem is that I want to allow internal network users to address the email server using the external IP address of the firewall.
Quoted 6 lines
Currently, laptop users internal to the network need to then become external when they work external to the LAN, and they have to either setup 2 different email accounts (one using the internal email server IP address, and one using the external IP address), or they have to remember to change their server settings each time they move from internal to external and vice-versa. Both of these are a pain for them.
Configure the machines to connect by hostname instead of IP address, and use split DNS to give the internal address to internal enquiries, and the external address to external enquiries.
Alternatively put the mail server on a perimeter network instead of the internal LAN, then both internal and external clients can connect using the external IP address.
The reason your existing setup doesn't work is that internal clients connect to the extenal address, which gets translated to the internal address, which then replies direct to the client (ie not back through the reverse nat on the firewall), therefore the client connects to address A and gets a reply from address B, confusing it and making it unhappy.
Antony.
Signature · 7 lines
Perfection in design is achieved not when there is nothing left to add, but
rather when there is nothing left to take away.
- Antoine de Saint-Exupery
Please reply to the list;
please don't CC me.Am Mon, 2003-12-08 um 02.39 schrieb TN:
Quoted 10 lines
Currently, laptop users internal to the network need to then become external when they work external to the LAN, and they have to either setup 2 different email accounts (one using the internal email server IP address, and one using the external IP address), or they have to remember to change their server settings each time they move from internal to external and vice-versa. Both of these are a pain for them. It doesn't work, the email client just times out, as if I'm still blocking some part of the data stream.
What am I doing wrong ?
The client can reach the mailserver alright, but the mailserver tries to respond directly to the client using the wrong IP-Address. Easiest solution:
Apply both DNAT and SNAT at the same time. Add the following rule:
iptables -t nat -A POSTROUTING -p tcp -m multiport --dport 25,110,143 -d 192.168.10.12 -s 192.168.10.0/24 -j SNAT --to <firewall-ip>
Cheers,
Ralf
Signature · 7 lines
Ralf Spenneberg RHCE, RHCX Book: VPN mit Linux Book: Intrusion Detection für Linux Server http://www.spenneberg.com IPsec-Howto http://www.ipsec-howto.org Honeynet Project Mirror: http://honeynet.spenneberg.org
hi - I may be wrong, but there is probably nothing iptables can do for you here on this - you should just give your public ip a dns A record (probably has one already, or MX at least?) in the internet DNS, and then set up a small DNS server on your internal lan/network and just add an A record with the same hostname, but pointing to the private IP instead. .. - set the users up to see the internal DNS address first in the list, then just make the users always use the hostname, and all should be work no matter where they are..
(I had this same problem but on a cisco pix firewalled network - luckily, the pix is intelligent enough to do this on it's own, but that was *going* to be how i solved the same problem)
if this doesn't work, or appeal to you, google for 'netsh' - a windows util that will change connection settings via a short script that you can set up on a user's laptop..
regards,
jamie
Quoted 32 lines · TN
Hi all,
I have a problem which I thought I'd seen the solution so somewhere, but I just can't find the posting anymore.
I have an iptables firewall, and I port forward to an internal email server on a 192.168.10.0/24 LAN network.
This all works fine, external email comes & goes OK. My problem is that I want to allow internal network users to address the email server using the external IP address of the firewall.Currently, laptop users internal to the network need to then become external when they work external to the LAN, and they have to either setup 2 different email accounts (one using the internal email server IP address, and one using the external IP address), or they have to remember to change their server settings each time they move from internal to external and vice-versa. Both of these are a pain for them.
I have attempted to allow this to work by using the following prerouting rules & forward rules (default policies are DROP, DROP, ACCEPT)
iptables -t nat -A PREROUTING -p tcp --dport 25 -j DNAT --to 192.168.10.12:25 iptables -t nat -A PREROUTING -p tcp --dport 110 -d -j DNAT --to 192.168.10.12:110 iptables -t nat -A PREROUTING -p tcp --dport 143 -d -j DNAT --to 192.168.10.12:143
iptables -A FORWARD -p tcp -s 0/0 -d 192.168.10.12/32 --destination-port 25 --syn -j ACCEPT iptables -A FORWARD -p tcp -s 0/0 -d 192.168.10.12/32 --destination-port 110 --syn -j ACCEPT iptables -A FORWARD -p tcp -s 0/0 -d 192.168.10.12/32 --destination-port 143 --syn -j ACCEPT
These are just more generalised rules that people commonly use for doing port forwarding - I have just made them less strict by taking about the input & output constraints in an attempt to allow external & internal clients to access the email server via the external ip.
It doesn't work, the email client just times out, as if I'm still blocking some part of the data stream. What am I doing wrong ?
thanks.
-Tim