PROBLEM: 2.6.0-t11-bk8 GPF
Hello,
I am getting crashes on 2.6.0-test11-bk8, started to happen after a memory uprade to 2GB (from 1GB) and turning on the HIGHMEM (4GB) support.
The server is UP AMD Opteron(tm) Processor 244, board is MSI KT800 (VIA chipset), SATA 250GB drive.
I was doing a little stress-test over samba trying to use as io cache as possible. (copied several 1GB files from the server)
the server does not run any fancy applications, just non-loaded www, imap, smtp, ftp...
I am not sure what relevant information should I provide, I'd be happy to help to track this down, of course - if it is not hardware related :-(
general protection fault: 0000 [#1] CPU: 0 EIP: 0060:[<c0145ed8>] Not tainted EFLAGS: 00010286
EIP is at page_referenced+0x58/0xa0
eax: ed941140 ebx: ed941140 ecx: 0000000e edx: ffffffff
esi: 00000001 edi: 00000000 ebp: c2399fa8 esp: f7dcbdf0
ds: 007b es: 007b ss: 0068
Process kswapd0 (pid: 7, threadinfo=f7dca000 task=f7dcf2e0)
Stack: c1e96a60 c2399fc0 c2399fa8 c239aae8 c03338c8 c013e938 c1e96970 c03338d8
c1e96920 00000000 00000000 00000000 c239a3f8 c239af88 f7dcbe28
f7dcbe28
c239ab00 c239c388 c1e96858 c03338e0 c013e470 f7dcbe64 000000d0
f7dcbedc
Call Trace:
[<c013e938>] refill_inactive_zone+0x3a8/0x410
[<c013e470>] shrink_cache+0x160/0x280
[<c013ea1c>] shrink_zone+0x7c/0xb0
[<c013edfb>] balance_pgdat+0x17b/0x200
[<c013ef97>] kswapd+0x117/0x130
[<c011d6c0>] autoremove_wake_function+0x0/0x50
[<c011d6c0>] autoremove_wake_function+0x0/0x50
[<c013ee80>] kswapd+0x0/0x130
[<c0107289>] kernel_thread_helper+0x5/0xc
Code: 0f ba 32 05 19 c0 85 c0 8d 56 01 0f 45 f2 47 49 79 e6 8b 03Linux a.b.c 2.6.0-test11-bk8 #1 Fri Dec 12 22:22:22 CET 2003 i686 GNU/Linux
Gnu C 3.3.3 Gnu make 3.80 util-linux 2.12 mount 2.12 module-init-tools 0.9.15-pre4 e2fsprogs 1.35-WIP nfs-utils 1.0.6 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.1.14 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.0.91
Vendor: ATA Model: WDC WD2500JD-00F Rev: 0.81 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD360GD-00FN Rev: 0.81 Type: Direct-Access ANSI SCSI revision: 05
hmm.. interesting (but maybe unrelated stuff) in the dmesg is:_CRS returns NULL! Using IRQ 21 for device (PCI Interrupt Link [ALKB]).
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc9 -> IRQ 21 Mode:1 Active:1) 00:00:10[A] -> 2-21 -> IRQ 21
Pin 2-21 already programmed
Pin 2-21 already programmed
Pin 2-21 already programmed_CRS returns NULL! Using IRQ 20 for device (PCI Interrupt Link [ALKA]).
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20 Mode:1 Active:1) 00:00:11[A] -> 2-20 -> IRQ 20
Pin 2-21 already programmed_CRS returns NULL! Using IRQ 22 for device (PCI Interrupt Link [ALKC]).
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1) 00:00:11[C] -> 2-22 -> IRQ 22_CRS returns NULL! Using IRQ 23 for device (PCI Interrupt Link [ALKD]).
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xe1 -> IRQ 23 Mode:1 Active:1) 00:00:11[D] -> 2-23 -> IRQ 23