Linux 2.4.24-pre1: Instant reboot
Hi Marcelo, et al,
Just wanted to report an instantaneous reboot problem with 2.4.24-pre1.
I don't even see any printk's to the screen; as soon as LILO is finished loading the new kernel, the screen blanks and the BIOS goes through its boot sequence again. Since I seem to be the only one reporting this to LKML, I suspect I'll have to back out various patches to try to track this down. :-P
I'm using the same .config as in 2.4.23 with new questions left at their defaults (e.g. XFS=n, OOM_KILLER=n). I've had no problems with this otherwise rock-stable platform for all varieties of 2.4.x, save for some early USB EHCI issues long ago.
At work now, so I don't have a full .config handy, but:
* Slackware 8.1 based; glibc 2.2.5; gcc 2.95.3
* Soltek SL-75DRV2 (UP, Athlon XP 1700, VIA KT266A [VT8366A/VT8233])
* Root = ext3 on IDE partition
* DevFS, DevPTS, IDE-SCSI=cdrom0, USBStorage, USB EHCI, VFAT
* RadeonFB, IPTables, Realtek-8139
Everything else in .config is pretty vanilla (e.g. Linus defaults or thereabouts).
Kris
Quoted 24 lines · Kristofer T. Karas
Hi Marcelo, et al,
Just wanted to report an instantaneous reboot problem with 2.4.24-pre1.
I don't even see any printk's to the screen; as soon as LILO is finished loading the new kernel, the screen blanks and the BIOS goes through its boot sequence again. Since I seem to be the only one reporting this to LKML, I suspect I'll have to back out various patches to try to track this down. :-P
I'm using the same .config as in 2.4.23 with new questions left at their defaults (e.g. XFS=n, OOM_KILLER=n). I've had no problems with this otherwise rock-stable platform for all varieties of 2.4.x, save for some early USB EHCI issues long ago.
At work now, so I don't have a full .config handy, but:
* Slackware 8.1 based; glibc 2.2.5; gcc 2.95.3
* Soltek SL-75DRV2 (UP, Athlon XP 1700, VIA KT266A [VT8366A/VT8233])
* Root = ext3 on IDE partition
* DevFS, DevPTS, IDE-SCSI=cdrom0, USBStorage, USB EHCI, VFAT
* RadeonFB, IPTables, Realtek-8139
Everything else in .config is pretty vanilla (e.g. Linus defaults or thereabouts).
Quoted 2 lines
Kris
What CPU did you compile it for? The reboot stuff looks like a CPU reset because of a triple fault, i.e., using CMOV when there isn't any, etc. Try something more generic and see if it boots.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.22 on an i686 machine (797.90 BogoMips).
Note 96.31% of all statistics are fiction.
Quoted 9 lines · Kristofer T. Karas
Hi Marcelo, et al,
Just wanted to report an instantaneous reboot problem with 2.4.24-pre1.
I don't even see any printk's to the screen; as soon as LILO is finished loading the new kernel, the screen blanks and the BIOS goes through its boot sequence again. Since I seem to be the only one reporting this to LKML, I suspect I'll have to back out various patches to try to track this down. :-P
I've seen this, too, with XFS=y and OOM_KILLER=n, but haven't yet gotten around to "make clean" and try again with a fresh build (I had 2.4.23 code traces in the .o files). I also have device-manager 1.00.07 patched in (no rejects, no manual edits necessary). My version was pulled from BK, I can look up the latest ChangeSet I pulled from the official kernel if necessary. I'll now try a "make clean" build after yet another BK pull.
Quoted 6 lines
At work now, so I don't have a full .config handy, but:
* Slackware 8.1 based; glibc 2.2.5; gcc 2.95.3
* Soltek SL-75DRV2 (UP, Athlon XP 1700, VIA KT266A [VT8366A/VT8233])
* Root = ext3 on IDE partition
* DevFS, DevPTS, IDE-SCSI=cdrom0, USBStorage, USB EHCI, VFAT
* RadeonFB, IPTables, Realtek-8139
SuSE Linux 8.2, gcc 3.3.1, Gigabyte 7ZX-R (VIA KT133 + Promise 20265R), root ext3 on SCSI (sym53c8xx_2), no devfs, no usb storage, vfat, xfs.
However, I doubt the file systems matter, the machine apparently hasn't probed my partitions when it reboots.
Signature · 3 lines
Matthias Andree Encrypt your mail: my GnuPG key ID is 0x052E7D95
Short answer to my previous post on this subject:
CONFIG_EDD=y + Athlon + VIA KT266A = triple fault on boot.
Longer answer:
Dick Johnson asked,
Quoted 1 line
What CPU did you compile it for?
Compiled 2.4.24-pre1 for Athlon/K7. I also tried it with generic i386, which made no difference.
Quoted 1 line · Matthias Andree
I've seen this, too, with XFS=y and OOM_KILLER=n,
If I didn't have 2 hours sleep, I would have hacked rc.sysinit to auto-compile my linux kernel with a binary search looking for the culprit, iterating if the BIOS rebooted an old kernel; but I was too tired today for scriping foo. :-) So I did it the old fashioned way.
Turns out, after about a dozen compile/reboot loops, I narrowed it down repeatably to the "x86 BIOS Enhanced Disk Drive support" (CONFIG_EDD) option. I can turn off just about every .config option, turn that one on, and the kernel triple faults upon boot. This is the first time that a 2.4.x kernel has ever triple faulted on boot on my system. As mentioned above, CPU choice makes no difference.
Marcelo: Perhaps have the author of whatever patch interacts with CONFIG_EDD work a bit more on getting the patch right for various platforms. The (EXPERIMENTAL) feature worked just fine for me on 2.4.22...24.2.23, but the current -pre1 bombs for athlon/via_kt266a.
Kris
Quoted 3 lines · On Dec-17 2003, Wed, 01:07 -0500 Kristofer T. Karas…
Short answer to my previous post on this subject:
CONFIG_EDD=y+ Athlon + VIA KT266A = triple fault on boot.
Great work, thanks for the valuable info!
Signature · 1 line
Tomas Szepe <[email protected]>
Quoted 4 lines · Kristofer T. Karas
If I didn't have 2 hours sleep, I would have hacked rc.sysinit to auto-compile my linux kernel with a binary search looking for the culprit, iterating if the BIOS rebooted an old kernel; but I was too tired today for scriping foo. :-) So I did it the old fashioned way.
I think you would have had to do it manually anyway. Your boot didn't even get to the point of loading userspace, so you would have been indefinately one kernel.