Skip to contentSkip to conversation

IDE performance drop between 2.4.23 and 2.6.0

DISCUSSION Luis Miguel García 1 participant 1 message Dec 25, 2003

lore
Share & tools
lore
#0 lore raw

I cannot compare 2.4 with 2.6, but I think this is not too much...

It's a nforce2 motherboard, paralel-ATA and Seagate Barracuda IV (or V, I cannot remember). AthlonXP-2500+.

Any of the IDE gurus can say something about this?

Thanks!!

/dev/hda:

Timing buffer-cache reads:   1740 MB in  2.00 seconds = 868.83 MB/sec
Timing buffered disk reads:   94 MB in  3.03 seconds =  31.03 MB/sec

bash-2.05b# hdparm /dev/hda

/dev/hda:

multcount    = 16 (on)
IO_support   =  1 (32-bit)
unmaskirq    =  1 (on)
using_dma    =  1 (on)
keepsettings =  0 (off)
readonly     =  0 (off)
readahead    = 256 (on)
geometry     = 65535/16/63, sectors = 156301488, start = 0