Prodigy 7.1 ?
Hi,
I got today a Audiotrak Prodigy 7.1 soundcard which is based on the ICE1724 chip. Since it's a lovely card (106db SNR, 106db DR codec), i'd love to get it running under linux. I downloaded the latest alsa drivers but there is no support for it. I'd volunteer to write some code to get it working if there isn't anybody else doing the same.
For more information see: http://www.digit-life.com/articles2/audiotrak-prodigy71/
The card is based on the wonderful WM8770 codec (which alone costs 1/5 of the retail price of the card :)
See: http://www.wolfsonmicro.com/products/digital_audio/codecs/WM8770/ for the specs.
Are there any plans on supporting this chip?
Apostolos
PS Since I'me not yet subscribed to alsa-devel please cc my personal email
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
Hi,
Unfortunately WM8770 driver development is not in my immediate to do list. However, I do remember someone had done some work on the 8770 (possibly on the Aureon Terratec card). You may want to look at this as a starting point for your driver.
You will also have to write some code for your audio controller chip (ICE1724). This chip controls and sends/receives audio data to the WM8770 codec. If your lucky, this chip may also be part of another driver.
Cheers
Liam
P.S. Your PC clock is wrong.
Quoted 37 lines · Apostolos Dimitromanolakis
Hi,
I got today a Audiotrak Prodigy 7.1 soundcard which is based on the
ICE1724 chip. Since it's a lovely card (106db SNR, 106db DR codec), i'd love to get it running under linux. I downloaded the latest alsa drivers but there is no support for it. I'd volunteer to write some code to get it working if there isn't anybody else doing the same.For more information see:
http://www.digit-life.com/articles2/audiotrak-prodigy71/
The card is based on the wonderful WM8770 codec (which alone costs 1/5 of the retail price of the card :)
See: http://www.wolfsonmicro.com/products/digital_audio/codecs/WM8770/
for the specs.Are there any plans on supporting this chip?
Apostolos
PS Since I'me not yet subscribed to alsa-devel please cc my personal email
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
_______________________________________________
Alsa-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs Email Security System.
________________________________________________________________________
Signature · 17 lines
Liam Girdwood <[email protected]> Wolfson Microelectronics plc www.wolfsonmicro.com T +44 131 272 7000 F +44 131 272 7001 Registered in Scotland 89839 This message may contain confidential or proprietary information. If you receive this message in error, please immediately delete it, destroy all copies of it and notify the sender. Any views expressed in this message are those of the individual sender, except where the message states otherwise. We take reasonable precautions to ensure our Emails are virus free. However, we cannot accept responsibility for any virus transmitted by us and recommend that you subject any incoming Email to your own virus checking procedures. ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php
At Wed, 15 Oct 2003 13:41:40 +0100,
Quoted 7 lines · Liam Girdwood
Hi,
Unfortunately WM8770 driver development is not in my immediate to do list. However, I do remember someone had done some work on the 8770 (possibly on the Aureon Terratec card). You may want to look at this as a starting point for your driver.
yes, it's in aureon.c, which is based also on ice1724 chip. hacking this code would be the first step.
Quoted 4 lines
You will also have to write some code for your audio controller chip (ICE1724). This chip controls and sends/receives audio data to the WM8770 codec. If your lucky, this chip may also be part of another driver.
the problem is that each ice1724 board is implemented with different GPIO use. furthermore, ice1724 has 24 (i forgot the exact number) GPIO pins, while ice1712 has only 8. it makes already difficult to check the pin connection. the help of the board vendor is most likely needed.
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
Quoted 18 lines · Takashi Iwai
At Wed, 15 Oct 2003 13:41:40 +0100,
Quoted 6 lines · Liam Girdwood
Hi,
Unfortunately WM8770 driver development is not in my immediate to do list. However, I do remember someone had done some work on the 8770 (possibly on the Aureon Terratec card). You may want to look at this as a starting point for your driver.
yes, it's in
aureon.c, which is based also on ice1724 chip. hacking this code would be the first step.Quoted 4 lines
You will also have to write some code for your audio controller chip (ICE1724). This chip controls and sends/receives audio data to the WM8770 codec. If your lucky, this chip may also be part of another driver.
Quoted 9 lines
the problem is that each ice1724 board is implemented with different GPIO use. furthermore, ice1724 has 24 (i forgot the exact number) GPIO pins, while ice1712 has only 8. it makes already difficult to check the pin connection. the help of the board vendor is most likely needed.
Takashi
The Prodigy 7.1 is identically the same card as the Aureon Space 7.1....just different firmware and digital coaxial instead of toslink.
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
At Wed, 15 Oct 2003 15:35:00 +0100,
Quoted 27 lines · Mark Hubbard
Quoted 25 lines · Takashi Iwai
At Wed, 15 Oct 2003 13:41:40 +0100,
Quoted 6 lines · Liam Girdwood
Hi,
Unfortunately WM8770 driver development is not in my immediate to do list. However, I do remember someone had done some work on the 8770 (possibly on the Aureon Terratec card). You may want to look at this as a starting point for your driver.
yes, it's in
aureon.c, which is based also on ice1724 chip. hacking this code would be the first step.Quoted 4 lines
You will also have to write some code for your audio controller chip (ICE1724). This chip controls and sends/receives audio data to the WM8770 codec. If your lucky, this chip may also be part of another driver.
the problem is that each ice1724 board is implemented with different GPIO use. furthermore, ice1724 has 24 (i forgot the exact number) GPIO pins, while ice1712 has only 8. it makes already difficult to check the pin connection. the help of the board vendor is most likely needed.
Quoted 5 lines
Quoted 2 lines
Takashi
The Prodigy 7.1 is identically the same card as the Aureon Space 7.1....just different firmware and digital coaxial instead of toslink.
then you can fake the subvendor id (VT1724_SUBDEVICE_AUREON71_SPACE) defined in aureon.h by replacing it with your card's id, which is shown in the EEPROM output in /proc/asound/card0/ice1724.
we might need to tune up eeprom entries to match with the actual hardware, but in theory it should be ok as it is.
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
Quoted 4 lines · Takashi Iwai
Quoted 3 lines
The Prodigy 7.1 is identically the same card as the Aureon Space 7.1....just different firmware and digital coaxial instead of toslink.
Quoted 8 lines
then you can fake the subvendor id (
VT1724_SUBDEVICE_AUREON71_SPACE) defined inaureon.hby replacing it with your card's id, which is shown in the EEPROM output in/proc/asound/card0/ice1724.we might need to tune up eeprom entries to match with the actual hardware, but in theory it should be ok as it is.
Unfortunately I tried that and it doesn't work. A patch was needed since the reported eeprom size was 120 and no provision was made for that. I was able to get an eeprom dump and it doesn't look quite as the data for the aureon eeprom:
EEPROM dump: 45 53 49 33 78 78 78 78 45 47 4f 53 59 53 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Module loads and report ICE1724 at ALSA but no sound at all. The following errors appear:
PCI: Found IRQ 11 for device 00:0a.0 invalid EEPROM version 120
AC'97 0:0 does not respond - RESET
ice1712: cannot initialize pro ac97, skipped
and here is the lspci data (after module loaded):
00:0a.0 Multimedia audio controller: IC Ensemble Inc ICE1724 [Envy24HT] (rev 01)
Subsystem: Unknown device 4933:4553
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000 [size=32]
Region 1: I/O ports at 9800 [size=128]
Capabilities: [80] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 12 14 24 17 05 00 10 02 01 00 01 04 00 20 00 00
10: 01 a0 00 00 01 98 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 33 49 53 45
30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
At Fri, 17 Oct 2003 02:40:43 -0400,
Quoted 18 lines · Apostolos Dimitromanolakis
Quoted 5 lines · Takashi Iwai
Quoted 4 lines
The Prodigy 7.1 is identically the same card as the Aureon Space 7.1....just different firmware and digital coaxial instead of toslink.
Quoted 8 lines
then you can fake the subvendor id (
VT1724_SUBDEVICE_AUREON71_SPACE) defined inaureon.hby replacing it with your card's id, which is shown in the EEPROM output in/proc/asound/card0/ice1724.we might need to tune up eeprom entries to match with the actual hardware, but in theory it should be ok as it is.
Quoted 4 lines
Unfortunately I tried that and it doesn't work. A patch was needed since the reported eeprom size was 120 and no provision was made for that. I was able to get an eeprom dump and it doesn't look quite as the data for the aureon eeprom:
note that aureon boards don't provide the real data from EEPROM. that's why eeprom data are defined in the source code (aureon.c).
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
Does this card have something to do with EGOSYS ?
Quoted 11 lines · Apostolos Dimitromanolakis
Quoted 8 lines · Takashi Iwai
Quoted 2 lines
The Prodigy 7.1 is identically the same card as the Aureon Space 7.1....just different firmware and digital coaxial instead of toslink.
then you can fake the subvendor id (
VT1724_SUBDEVICE_AUREON71_SPACE) defined inaureon.hby replacing it with your card's id, which is shown in the EEPROM output in/proc/asound/card0/ice1724.
Quoted 8 lines
Quoted 4 lines
we might need to tune up eeprom entries to match with the actual hardware, but in theory it should be ok as it is.
Unfortunately I tried that and it doesn't work. A patch was needed since the reported eeprom size was 120 and no provision was made for that. I was able to get an eeprom dump and it doesn't look quite as the data for the aureon eeprom:
EEPROM dump: 45 53 49 33 78 78 78 78 45 47 4f 53 59 53 ff ff ff ff ff ff
in ASCII: ESI3xxxxEGOSYS (Do EGOSYS make the card?)
Quoted 19 lines
Module loads and report ICE1724 at ALSA but no sound at all. The following errors appear:
PCI: Found IRQ 11 for device 00:0a.0
invalid EEPROM version 120
AC'97 0:0 does not respond - RESET
ice1712: cannot initialize pro ac97, skippedand here is the lspci data (after module loaded):
00:0a.0 Multimedia audio controller: IC Ensemble Inc ICE1724 [Envy24HT] (rev 01)
Subsystem: Unknown device 4933:4553
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000 [size=32]
Quoted 8 lines
Region 1: I/O ports at 9800 [size=128]
Capabilities: [80] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 12 14 24 17 05 00 10 02 01 00 01 04 00 20 00 00 10: 01 a0 00 00 01 98 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 49 53 45
ASCII: 3ISE ( The exact reverse of ESI3 in the EEPROM.)
-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo
The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room http://www.enterpriselinuxforum.com