Skip to contentSkip to conversation

2.6.11: USB broken on nforce4, ipv6 still broken, centrino speedstep even more broken than in 2.6.10

DISCUSSION Robert Hancock 3 participants 3 messages Mar 12, 2005 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 4 lines · Felix von Leitner

My new nForce 4 mainboard has 10 or so USB 2.0 outlets. In Windows, they all work. In Linux, two of them work. Putting my USB stick or anything else in one of the others produces nothing in Linux. Apparently no IRQ getting through or something?

Likely similar to the problem I reported in this thread on linux-usb-devel - the patch that David Brownell posted fixed the problem for me..

http://sourceforge.net/mailarchive/message.php?msg_id=10755097

#2 lore raw

(Restoring email headers. Please always use reply-to-all)

Quoted 19 lines · Robert Hancock
Quoted 4 lines · Felix von Leitner

My new nForce 4 mainboard has 10 or so USB 2.0 outlets. In Windows, they all work. In Linux, two of them work. Putting my USB stick or anything else in one of the others produces nothing in Linux. Apparently no IRQ getting through or something?

Likely similar to the problem I reported in this thread on linux-usb-devel - the patch that David Brownell posted fixed the problem for me..

http://sourceforge.net/mailarchive/message.php?msg_id=10755097

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw
Quoted 17 lines · Andrew Morton

(Restoring email headers. Please always use reply-to-all)

Quoted 13 lines · Robert Hancock
Quoted 4 lines · Felix von Leitner

My new nForce 4 mainboard has 10 or so USB 2.0 outlets. In Windows, they all work. In Linux, two of them work. Putting my USB stick or anything else in one of the others produces nothing in Linux. Apparently no IRQ getting through or something?

Likely similar to the problem I reported in this thread on linux-usb-devel - the patch that David Brownell posted fixed the problem for me..

http://sourceforge.net/mailarchive/message.php?msg_id=10755097

My thoughts exactly. However, 2.6.11 includes that fix. Are you sure that dmesg output came from 2.6.11?

To repeat what Alan Stern said yesterday: provide full "dmesg" output, with CONFIG_USB_DEBUG enabled. I think that falls into the category of "how to provide a usable bug report" ... :)