: IEC958 Capture Switch cannot be set with alsamixer
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1075>
======================================================================
Reported By: vsu
Assigned To:
======================================================================
Project: ALSA - utils Issue ID: 1075 Category: alsamixer Reproducibility: always Severity: minor Priority: normal Status: new ====================================================================== Date Submitted: 04-24-2005 16:44 CEST Last Modified: 08-20-2005 19:06 CEST
======================================================================
Summary: IEC958 Capture Switch cannot be set with alsamixer
Description:
alsamixer (both 1.0.8 and CVS snapshot from 2005-04-23) is not able to control IEC958 Capture Switch of the ALC850 codec:
- When alsamixer is started, IEC958 Capture Switch is always displayed as turned on, regardless of the actual state.
- When pressing Space, the switch seems to be toggled on screen, however, the actual mixer state does not change.
The switch can be controlled with amixer:
$ amixer cset numid=40,iface=MIXER,name='IEC958 Capture Switch' on numid=40,iface=MIXER,name='IEC958 Capture Switch' ; type=BOOLEAN,access=rw---,values=1 : values=on $ amixer cset numid=40,iface=MIXER,name='IEC958 Capture Switch' off numid=40,iface=MIXER,name='IEC958 Capture Switch' ; type=BOOLEAN,access=rw---,values=1 : values=off
When the switch state is changed this way while alsamixer is running, the alsamixer screen is updated, and the switch is drawn as if turned on.
======================================================================
----------------------------------------------------------------------
vsu - 08-20-05 18:16
----------------------------------------------------------------------
Tested with today's CVS (1.0.10rc1+) - the same problem is still there.
----------------------------------------------------------------------
vsu - 08-20-05 19:06
----------------------------------------------------------------------
Even more - I have found that I also cannot control IEC958 Playback Switch through alsamixer. This control does not even appear on the screen - the "IEC958" element is shown as an enum control (with values "PCM", "Analog In", "IEC958 In"), and there is no mute box below it.
Also, when I switch to the view with all controls (with F5), I don't see the capture switch for IEC958 too - only the enum control is displayed.
I have attached my asound.state file and the output of "amixer contents" and "amixer scontents".
Issue History
Date Modified Username Field Change
======================================================================
04-24-05 16:44 vsu New Issue 08-20-05 16:02 jdthood Note Added: 0005877 08-20-05 18:16 vsu Note Added: 0005881 08-20-05 18:59 vsu File Added: asound.state 08-20-05 19:00 vsu File Added: amixer_contents 08-20-05 19:00 vsu File Added: amixer_scontents 08-20-05 19:06 vsu Note Added: 0005882
======================================================================
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf