Skip to contentSkip to conversation

negative tokens

LARTC Denis Kot 2 participants 3 messages Jan 27, 2005

lore
Share & tools
lore

Denis Kot

author
#0 lore raw

I have this:
class htb 1:29 parent 1:1 prio 0 rate 3000bit ceil 100000bit burst 1599b cburst 1611b
Sent 33233 bytes 772 pkts (dropped 0, overlimits 0)
lended: 415 borrowed: 357 giants: 0
tokens: -3756376 ctokens: 128779

or this:
class htb 1:21 parent 1:1 prio 0 rate 3000bit ceil 100000bit burst 1599b cburst 1611b
Sent 57554 bytes 618 pkts (dropped 0, overlimits 0)
lended: 193 borrowed: 425 giants: 0
tokens: -484950 ctokens: 128779

and there is more like this
what´s wrong?

this is class for imq0 device (for me this is ingres device) and I have this:
imq0 Link encap:UNSPEC HWaddr
00-00-00-FF-FF-00-00-00-00-00-00-00-00-00-00-00

          UP RUNNING NOARP  MTU:1500  Metric:1
          RX packets:131111 errors:0 dropped:0 overruns:0 frame:0
          TX packets:123371 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:30
          RX bytes:17694200 (16.8 Mb)  TX bytes:15230834 (14.5 Mb)

as you can see RX bytes doesn´t equal to TX bytes. what´s wrong?

Signature · 7 lines
Denis Kot
denis?jabber.org.by
ICQ: 13680126
Mobil: +375 29 6-1234-78
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 14 lines · Denis Kot

I have this:
class htb 1:29 parent 1:1 prio 0 rate 3000bit ceil 100000bit burst 1599b cburst 1611b
Sent 33233 bytes 772 pkts (dropped 0, overlimits 0)
lended: 415 borrowed: 357 giants: 0
tokens: -3756376 ctokens: 128779

or this:
class htb 1:21 parent 1:1 prio 0 rate 3000bit ceil 100000bit burst 1599b cburst 1611b
Sent 57554 bytes 618 pkts (dropped 0, overlimits 0)
lended: 193 borrowed: 425 giants: 0
tokens: -484950 ctokens: 128779

Quoted 2 lines

and there is more like this
what´s wrong?

Nothing.
To understand what's going on, I need the tc commands you use to create the htb classes.

Quoted 10 lines

this is class for imq0 device (for me this is ingres device) and I have
this: imq0 Link encap:UNSPEC HWaddr
00-00-00-FF-FF-00-00-00-00-00-00-00-00-00-00-00

          UP RUNNING NOARP  MTU:1500  Metric:1
          RX packets:131111 errors:0 dropped:0 overruns:0 frame:0
          TX packets:123371 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:30
          RX bytes:17694200 (16.8 Mb)  TX bytes:15230834 (14.5 Mb)

as you can see RX bytes doesn´t equal to TX bytes. what´s wrong?

That means that some packets are dropped because you shape on that interface.

Stef
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

author
#2 lore raw
In reply to Denis Kot

##########
DEV0=imq0
RATEUP0
VPNS0

/sbin/ip link set imq0 up

tc qdisc add dev $DEV0 root handle 1: htb default 30

tc class add dev $DEV0 parent 1: classid 1:1 htb rate ${RATEUP}kbit ceil ${RATEUP}kbit

tc class add dev $DEV0 parent 1:1 classid 1:30 htb rate $[$RATEUP/$VPNS]kbit ceil ${RATEUP}kbit
###########

this is from /etc/ppp/ip-up.local:

###########

# the followings parameters are available:
# $1 = interface-name
# $2 = tty-device
# $3 = speed
# $4 = local-IP-address
# $5 = remote-IP-address
# $6 = ipparam

/sbin/iptables -t mangle -A PREROUTING -i $1 -d ! 192.168.0.0/16 -j IMQ --todev 0
/sbin/tc class add dev $DEV0 parent 1:1 classid 1:2${1/ppp/} htb rate $[$RATEUP/$VPNS]kbit ceil ${RATEUP}kbit
/sbin/tc filter add dev $DEV0 protocol ip parent 1:0 prio 1 u32 match ip src $5 flowid 1:2${1/ppp/}
###########

Quoted 47 lines · Sujith Chennupati

it would be clear if you attach the code you are using with may be some packets are not matched with the filter you specified and
going by deafult queue

Quoted 28 lines · Denis Kot

I have this:
class htb 1:29 parent 1:1 prio 0 rate 3000bit ceil 100000bit burst 1599b cburst 1611b
Sent 33233 bytes 772 pkts (dropped 0, overlimits 0)
lended: 415 borrowed: 357 giants: 0
tokens: -3756376 ctokens: 128779

or this:
class htb 1:21 parent 1:1 prio 0 rate 3000bit ceil 100000bit burst 1599b cburst 1611b
Sent 57554 bytes 618 pkts (dropped 0, overlimits 0)
lended: 193 borrowed: 425 giants: 0
tokens: -484950 ctokens: 128779

and there is more like this
what´s wrong?

this is class for imq0 device (for me this is ingres device) and I have this:
imq0 Link encap:UNSPEC HWaddr
00-00-00-FF-FF-00-00-00-00-00-00-00-00-00-00-00

         UP RUNNING NOARP  MTU:1500  Metric:1
         RX packets:131111 errors:0 dropped:0 overruns:0 frame:0
         TX packets:123371 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:30
         RX bytes:17694200 (16.8 Mb)  TX bytes:15230834 (14.5 Mb)

as you can see RX bytes doesn´t equal to TX bytes. what´s wrong?

Quoted 9 lines

--
Denis Kot
denis?jabber.org.by
ICQ: 13680126
Mobil: +375 29 6-1234-78
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

--
sujith chandra chowdhary CHENNUPATI

Signature · 7 lines
Denis Kot
denis?jabber.org.by
ICQ: 13680126
Mobil: +375 29 6-1234-78
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/