why there is any traffic in default class?
I have:
tc qdisc add dev imq0 root handle 1: htb default 30
tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbit
then:
iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0 tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol ip parent 1:0 prio 1 u32 match ip src 192.168.2.2 flowid 1:22
so, as I understand any traffic from source 192.168.2.2 and from interface ppp0 must be going directly in to class 1:22, so default class 30 must not have any traffic. isn´t it?
Signature · 7 lines
Denis Kot denis?jabber.org.by ICQ: 13680126 Mobil: +375 29 6-1234-78 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi!
Quoted 9 lines · Denis Kot
I have:
tc qdisc add dev imq0 root handle 1: htb default 30
tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbitthen:
iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0
If i understand you correctly, it should be:
iptables -t mangle -A PREROUTING -i ppp0 -j IMQ --todev 0 iptables -t mangle -A PREROUTING -s 192.168.2.2 -j IMQ --todev 0
Your rule means: traffic which came from ppp0 AND has source ip 192.168.2.2 go to IMQ.
Quoted 7 lines
tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol ip parent 1:0 prio 1 u32 match ip src 192.168.2.2 flowid 1:22
so, as I understand any traffic from source 192.168.2.2 and from interface ppp0 must be going directly in to class 1:22, so default class 30 must not have any traffic. isn´t it?
This part may or may not be ok, i do not know.
Signature · 5 lines
Udv, Nandor _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
my rules is right, cause ppp0 is vpn client who has (applied by pppd) ip 192.168.2.2. so I want any traffic from ppp0 AND 192.168.2.2 route to class 1:22
Quoted 37 lines · Tóth Nándor
Hi!
Quoted 9 lines · Denis Kot
I have:
tc qdisc add dev imq0 root handle 1: htb default 30
tc class add dev imq0 parent 1: classid 1:1 htb rate 512kbit ceil 512kbit tc class add dev imq0 parent 1:1 classid 1:30 htb rate 64kbit ceil 512kbitthen:
iptables -t mangle -A PREROUTING -i ppp0 -s 192.168.2.2 -j IMQ --todev 0
If i understand you correctly, it should be:
iptables -t mangle -A PREROUTING -i ppp0 -j IMQ --todev 0 iptables -t mangle -A PREROUTING -s 192.168.2.2 -j IMQ --todev 0Your rule means: traffic which came from ppp0 AND has source ip 192.168.2.2 go to IMQ.
Quoted 7 lines
tc class add dev imq0 parent 1:1 classid 1:22 htb rate 64kbit ceil 128kbit tc filter add dev imq0 protocol ip parent 1:0 prio 1 u32 match ip src 192.168.2.2 flowid 1:22
so, as I understand any traffic from source 192.168.2.2 and from interface ppp0 must be going directly in to class 1:22, so default class 30 must not have any traffic. isn´t it?
This part may or may not be ok, i do not know.
--
Udv,
Nandor
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 7 lines
Denis Kot denis?jabber.org.by ICQ: 13680126 Mobil: +375 29 6-1234-78 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/