Got DC10plus working with 2.4.20rc4
Hi Dennis,
Quoted 1 line · Dennis Grant
2) Building the current CVS (which doesn't seem to have been altered in months)
Uh, they're being worked on almost daily by me and Laurent. Just not the stable branch, but rather the video4linux2 branch. The standard branch just works(tm) and only gets bugfixes/compilefixes when needed.
Quoted 5 lines
for the driver-zoran project from mjpeg.sourceforge.net produced modules that worked. A brief visual comparison between them and the .c files in the kernel source didn't reveal any differences more obvious than some kernel version #ifdefs in the driver-zoran versions of the drivers - they're the same code, or at least _very_ similar.
The (important) difference is in the saa7110 module, afaik. That makes the kernel driver fail.
Quoted 2 lines
3) I had to build the bttv kernel driver as a module to get the i2c-old.o module built.
Not really, they're just there... The BTTV driver uses i2c-core and i2c-algo-bit.
Quoted 3 lines
c) When you check the DC10+ option in make config, these dependancies are
not being resolved, and one or more of them don't make it into the kernel when one attempts to compile DC10+ in monolithic
In-kernel is basically not supported. Just use modules.
Ronald
Signature · 2 lines
Ronald Bultje <[email protected]> Linux Video/Multimedia developer