Fixes for gcc 3.3
Subsystems (3)
PATCH 1/1 Fixes for gcc 3.3
[Note: I am not subscribed to the list; please CC: me on responses.]
The following is a short set of modifications I had to make to the
2.4.20 source to get it to compile under gcc 3.3. There may be more; these are just the ones that showed up under my configuration. If anyone is working on (or planning to work on) kernel/gcc-3.3 compatibility issues, feel free to use this as a starting point.
--Andrew Church
[email protected] http://achurch.org/
---------------------------------------------------------------------------
drivers/ide/ide-cd.h +1 -1
@@ -437,7 +437,7 @@byte curlba[3 ];byte nslots; -__u8 short slot_tablelen; +__u8 slot_tablelen; };
drivers/scsi/aic7xxx/aic7xxx_osm.c +19 -19
@@ -417,25 +417,25 @@MODULE_LICENSE ("Dual BSD/GPL" );#endif MODULE_PARM (aic7xxx,"s" ); -MODULE_PARM_DESC(aic7xxx, "period delimited, options string. - verbose Enable verbose/diagnostic logging - no_probe Disable EISA/VLB controller probing - no_reset Supress initial bus resets - extended Enable extended geometry on all controllers - periodic_otag Send an ordered tagged transaction periodically - to prevent tag starvation. This may be - required by some older disk drives/RAID arrays. - reverse_scan Sort PCI devices highest Bus/Slot to lowest - tag_info:<tag_str> Set per-target tag depth - seltime:<int> Selection Timeout(0/256ms,1/128ms,2/64ms,3/32ms) - - Sample /etc/modules.conf line: - Enable verbose logging - Disable EISA/VLB probing - Set tag depth on Controller 2/Target 2 to 10 tags - Shorten the selection timeout to 128ms from its default of 256 - - options aic7xxx='\"verbose.no_probe.tag_info:{{}.{}.{..10}}.seltime:1\"' +MODULE_PARM_DESC (aic7xxx,"period delimited, options string.\n\ +verbose Enable verbose/diagnostic logging\n\ +no_probe Disable EISA/VLB controller probing\n\ +no_reset Supress initial bus resets\n\ +extended Enable extended geometry on all controllers\n\ +periodic_otag Send an ordered tagged transaction periodically\n\ +to prevent tag starvation. This may be\n\ +required by some older disk drives/RAID arrays. \n\ +reverse_scan Sort PCI devices highest Bus/Slot to lowest\n\ +tag_info:<tag_str> Set per-target tag depth\n\ +seltime:<int> Selection Timeout(0/256ms,1/128ms,2/64ms,3/32ms)\n\ +\n\ +Sample /etc/modules.conf line:\n\ +Enable verbose logging\n\ +Disable EISA/VLB probing\n\ +Set tag depth on Controller 2/Target 2 to 10 tags\n\ +Shorten the selection timeout to 128ms from its default of 256\n\ +\n\ +options aic7xxx='\"verbose.no_probe.tag_info:{{}.{}.{..10}}.seltime:1\"'\n\ " );#endif
net/core/rtnetlink.c +1 -1
@@ -394,7 +394,7 @@* Malformed skbs with wrong lengths of messages are discarded silently. */ -extern __inline__int rtnetlink_rcv_skb (struct sk_buff *skb) +__inline__int rtnetlink_rcv_skb (struct sk_buff *skb) {int err;struct nlmsghdr * nlh;
drivers/ide/ide-cd.h line 441
Quoted 12 lines · [email protected] (Andrew Church) writes:
The following is a short set of modifications I had to make to the
2.4.20 source to get it to compile under gcc 3.3.drivers/ide/ide-cd.h +1
-1@@ -437,7 +437,7 @@byte curlba[3 ];byte nslots; -__u8 short slot_tablelen; +__u8 slot_tablelen; };
Please check out the 2.5 source whether things are fixed there already, and maybe differently. This for example should really be __u16.
Signature · 1 line
Falk