Skip to contentSkip to conversation

Problem on SATA-disk with Promise SATAII 150 TX4 ("DriveReady SeekComplete Error")

DISCUSSION Joerg Sommrey 1 participant 1 message Feb 12, 2005 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw

Jeff Garzik wrote::

Quoted 16 lines
Quoted 15 lines · Johannes Resch

Hi,

[please CC me on replies]

I've got a box running 2.6.10 (with the patch[0] needed to support the Promise SATAII 150 TX4 controller).
This box has three software raid1 partitions mirrored on a SATA disk on the Promise controller and a disk on the mainboard IDE controller (VIA vt8235).

Within 4 days running the raid1, I got those three errors pasted below, each marking the SATA-raidmember as faulty. After "raidhotremove" and "raidhotadd" the SATA-raidmember syncs again fine and works at least a day until it is marked as faulty again.

Quoted 5 lines
Quoted 2 lines

Any pointers where I could look at to resolve this problem? The SATA drive is a new Seagate ST3250823AS.

I would change out your cables, and also make sure you are running 2.6.11-rc3-bk-latest, which includes all the SATAII patches and other fixes.

I don't believe it has anything to do with cabling. 2.6.10-ac9 introduced some sata patches. I didn't check -ac9 and -ac10, but -ac11 and -ac12 are not usable on my box with exactly the same symptoms.

-jo

Signature · 1 line
-rw-r--r--  1 jo users 63 2005-02-12 18:43 /home/jo/.signature