Skip to contentSkip to conversation

HTB + ESFQ in nat router for shape incoming by ip

LARTC JaNzUn 3 participants 3 messages Jan 18, 2004

lore
Share & tools
lore

JaNzUn

author
#0 lore raw

Hi, i´ve read about this problem but i didn´t find any solution.

I have a router with nat like that:
internet - eth0 - Router - eth1 - Lan

I made a htb script for shaping outgoing in eth0 and it works great. The problem begin with the incoming traffic... Like other people said, when somebody in the lan uses the tipical download accelerator, the line is out because the bandwidth is divided by conexions. So, i decided to use htb (with one class, filter and iptables mark per ip) for shaping an ceil traffic if it isn´t in use. All ok. Now i need to shape by ip, so i use esfq... but nothing happend.
A few lines of my script can be read here: (Only for 2 ips, there are a lot of them, but i do the test with two machines, one with daccelerator an other with simple download).

$tc qdisc add dev eth1 root handle 2:0 htb default 20
$tc class add dev eth1 parent 2:0 classid 2:2 htb rate 10mbit ceil 100mbit $tc class add dev eth1 parent 2:2 classid 2:9 htb rate 10mbit prio 2 $tc class add dev eth1 parent 2:2 classid 2:10 htb rate $DOWN ceil
$TDOWN prio 2
$tc class add dev eth1 parent 2:2 classid 2:11 htb rate $DOWN ceil
$TDOWN prio 2
$tc class add dev eth1 parent 2:2 classid 2:20 htb rate 10kbit ceil
100mbit prio 2

$tc qdisc add dev eth1 parent 2:10 handle 10: esfq perturb 10 hash dst $tc qdisc add dev eth1 parent 2:11 handle 11: esfq perturb 10 hash dst

$tc filter add dev eth1 parent 2:0 protocol ip prio 2 handle 1 fw
classid 2:9
$tc filter add dev eth1 parent 2:0 protocol ip prio 2 handle 10 fw
classid 2:10
$tc filter add dev eth1 parent 2:0 protocol ip prio 2 handle 11 fw
classid 2:11

iptables -A POSTROUTING -t mangle -o eth1 -p tcp --destination
192.168.1.88 -j MARK --set-mark 10
iptables -A POSTROUTING -t mangle -o eth1 -p tcp --destination
192.168.1.222 -j MARK --set-mark 11

I know rates are a bit stranges, but its only a test and htb works fine. The problem is the esfq, not work!

Has anybody make to work esfq? In this case, could you put a real script with it?
Or... anybody knows any metod to split incoming traffic by ip testing and working?

Thanks.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 6 lines

I made a htb script for shaping outgoing in eth0 and it works great. The problem begin with the incoming traffic... Like other people said, when somebody in the lan uses the tipical download accelerator, the line is out because the bandwidth is divided by conexions. So, i decided to use

Only if sfq is the outgoing scheduler; other schedulers will give different results.

Quoted 3 lines

htb (with one class, filter and iptables mark per ip) for shaping an ceil traffic if it isn´t in use. All ok. Now i need to shape by ip, so i use esfq... but nothing happend.

If you want to share the bandwidth equally among IPs, you can use ESFQ as root qdisc. What your script is doing is creating a class for each IP and defining a rate for it.

Rubens

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to JaNzUn
Quoted 44 lines · JaNzUn

Hi, i´ve read about this problem but i didn´t find any solution.

I have a router with nat like that:
internet - eth0 - Router - eth1 - Lan

I made a htb script for shaping outgoing in eth0 and it works great. The problem begin with the incoming traffic... Like other people said, when somebody in the lan uses the tipical download accelerator, the line is out because the bandwidth is divided by conexions. So, i decided to use htb (with one class, filter and iptables mark per ip) for shaping an ceil traffic if it isn´t in use. All ok. Now i need to shape by ip, so i use esfq... but nothing happend.
A few lines of my script can be read here: (Only for 2 ips, there are a lot of them, but i do the test with two machines, one with daccelerator an other with simple download).

$tc qdisc add dev eth1 root handle 2:0 htb default 20 $tc class add dev eth1 parent 2:0 classid 2:2 htb rate 10mbit ceil
100mbit $tc class add dev eth1 parent 2:2 classid 2:9 htb rate 10mbit prio 2 $tc class add dev eth1 parent 2:2 classid 2:10 htb rate $DOWN ceil $TDOWN prio 2
$tc class add dev eth1 parent 2:2 classid 2:11 htb rate $DOWN ceil
$TDOWN prio 2
$tc class add dev eth1 parent 2:2 classid 2:20 htb rate 10kbit ceil
100mbit prio 2

$tc qdisc add dev eth1 parent 2:10 handle 10: esfq perturb 10 hash dst $tc qdisc add dev eth1 parent 2:11 handle 11: esfq perturb 10 hash dst

$tc filter add dev eth1 parent 2:0 protocol ip prio 2 handle 1 fw
classid 2:9
$tc filter add dev eth1 parent 2:0 protocol ip prio 2 handle 10 fw
classid 2:10
$tc filter add dev eth1 parent 2:0 protocol ip prio 2 handle 11 fw
classid 2:11

iptables -A POSTROUTING -t mangle -o eth1 -p tcp --destination
192.168.1.88 -j MARK --set-mark 10
iptables -A POSTROUTING -t mangle -o eth1 -p tcp --destination
192.168.1.222 -j MARK --set-mark 11

I know rates are a bit stranges, but its only a test and htb works fine. The problem is the esfq, not work!

Quoted 6 lines

Has anybody make to work esfq? In this case, could you put a real script with it?
Or... anybody knows any metod to split incoming traffic by ip testing and working?

Thanks.

I think if you want esqf to do dst filtering, then you should use htb to seperate interactive traffic and have just one class for everyones bulk traffic with one esqf attached. You are already splitting with htb the ips to 10 and 11 then giving them one queue each - they should go to one esqf.

I'm not sure, but shouldn't you use flowid rather than classid in the $tc filter add lines.

Andy.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/