Skip to contentSkip to conversation

hdsp: output fader control via command line

DISCUSSION Martin Dausel 3 participants 3 messages Jan 19, 2004 – Jan 21, 2004

lore
Share & tools
lore
#0 lore raw

Hello,
i want to initialize my hdsp 9652 at startup to unmute the outputs without using hdspmixer.

Before the output fader controls were removed from the alsa control interface i used this script:

********************************************************
#!/bin/bash

i=0
j=0
count=26
count2=52
until [ $i -gt $count ]; do

    # inner loop delete all routing
    j=0
    until [ $j -gt $count2 ]; do
                amixer cset numid=5 $j,$i,0
                j=`expr $j + 1`
    done
   
    # set default routing software output n routes to hardware output n
    amixer cset numid=5 `expr $i + 26`,$i,32768
    i=`expr $i + 1`
    # set ouput faders to 0dB
    amixer cset iface=MIXER,name='Chn',index=$i 32768
 done
 **********************************************************

Using the current alsa driver i can't use the line "amixer cset iface=MIXER,name='Chn',index=$i 32768". Is there any alternative (excluding hdspmixer)?

It would be very nice if there would be an parameter for the snd-hdsp module to control if the ouptuts are muted or at 0dB ( in a way like the "line_outs_monitor" parameter ).

Is it possible to initialize the hdsp with a saved hdspmixer setting without using hdspmixer or better said without running X.

Thanks, Martin
------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn

#1 lore raw
Quoted 3 lines · Martin Dausel

Hello,
i want to initialize my hdsp 9652 at startup to unmute the outputs without using hdspmixer.

The outputs are not "muted", but the matrix mixer is empty.

Quoted 27 lines

Before the output fader controls were removed from the alsa control interface i used this script:

********************************************************

    #!/bin/bash
     
    i=0
    j=0
    count=26
    count2=52
    until [ $i -gt $count ]; do
       
        # inner loop delete all routing
        j=0
        until [ $j -gt $count2 ]; do
                    amixer cset numid=5 $j,$i,0
                    j=`expr $j + 1`
        done
       
        # set default routing software output n routes to hardware output n
        amixer cset numid=5 `expr $i + 26`,$i,32768
        i=`expr $i + 1`

        # set ouput faders to 0dB
        amixer cset iface=MIXER,name='Chn',index=$i 32768
    done
Quoted 5 lines

**********************************************************

Using the current alsa driver i can't use the line "amixer cset iface=MIXER,name='Chn',index=$i 32768". Is there any alternative (excluding hdspmixer)?

You can use amixer with the Mixer control.

Quoted 2 lines

It would be very nice if there would be an parameter for the snd-hdsp module to control if the ouptuts are muted or at 0dB ( in a way like the "line_outs_monitor" parameter ).

Could be done. Maybe at some point I'll add a parameter so that you can choose amongst the default hdspmixer presets at module insertion time.

Quoted 2 lines

Is it possible to initialize the hdsp with a saved hdspmixer setting without using hdspmixer or better said without running X.

You can do so with a small shell script and the Mixer element of amixer. You can find more information on the syntax browsing the alsa-dev archive and on the hdsp card page of the alsa-project website. I plan to add an option to export a shell script restoring the current setup in the next hdspmixer release.

Thomas

-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

#2 lore raw
Quoted 2 lines

I plan to add an option to export a shell script restoring the current setup in the next hdspmixer release.

Yes, this would be extremely nice if alsa could save the mixer settings at shutdown and restore them later.

I think the issue is that the mixer setting is not readable. Perhaps there is a way to work around this though?

Thanks again

Ed W

-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn