Skip to contentSkip to conversation

Linux 2.6 on AMD Alchemy Au1500

DISCUSSION Sylvain Munaut 4 participants 9 messages Jan 28, 2004 MIPS

lore
Share & tools
lore
#0 lore raw

Hi

For a new design, we're considering Alchemy Au1500 processor family. I'd like to know what is the current state of the linux 2.6 on this platforms / experiences ?

I mainly need :
- PCI support to connect Wifi, IDE controller, USB2.0 Host, FireWire controller
- Included Ethernet support

I've seen in the kernel sources that it should be supported but I'd like to know if there are known issues, comments, ...

Thanks for any info.

Sylvain Munaut

#1 lore raw
Quoted 1 line · Sylvain Munaut

For a new design, we're considering Alchemy Au1500 processor family. I'd like to know what is the current state of the linux 2.6 on this platforms / experiences ?

There are several of us working on it. The kernel is basically functional, and we are now in the midst of the 36-bit addressing updates for the peripherals, such as PCI. This should be completed soon.

Quoted 4 lines

I mainly need :
- PCI support to connect Wifi, IDE controller, USB2.0 Host, FireWire controller
- Included Ethernet support

If you are looking for product support, you should probably be contacting people that provide these services :-) We will eventually get around to testing all of these devices, but those of us working on this are likely to have different priorities.

Quoted 1 line

I've seen in the kernel sources that it should be supported but I'd like to know if there are known issues, comments, ...

The kernel, serial ports, internal Ethernet are all functional. The PCI is going to require we complete the 36-bit addressing (as was done in 2.4), and then I suspect the devices in your list will work as well as the maintainers of them advertise, since they aren't Au1xxx specific.

Thanks.

	-- Dan
#3 lore raw
In reply to Sylvain Munaut
Quoted 5 lines · Sylvain Munaut

Hi

For a new design, we're considering Alchemy Au1500 processor family. I'd like to know what is the current state of the linux 2.6 on this platforms / experiences ?

I'm working on it right now but it will take a bit more time to get everything done. I have a beta version of the 36 bit address patch that's required for the PCI and PCMCIA.

Pete

Quoted 14 lines

I mainly need :
- PCI support to connect Wifi, IDE controller, USB2.0 Host, FireWire
controller
- Included Ethernet support

I've seen in the kernel sources that it should be supported but I'd like to know if there are known issues, comments, ...

Thanks for any info.

Sylvain Munaut

#2 lore raw
In reply to Dan Malek
Quoted 7 lines · Dan Malek
Quoted 1 line

For a new design, we're considering Alchemy Au1500 processor family. I'd like to know what is the current state of the linux 2.6 on this platforms / experiences ?

There are several of us working on it. The kernel is basically functional, and we are now in the midst of the 36-bit addressing updates for the peripherals, such as PCI. This should be completed soon.

Ok cool.

Quoted 10 lines
Quoted 4 lines

I mainly need :
- PCI support to connect Wifi, IDE controller, USB2.0 Host, FireWire controller
- Included Ethernet support

If you are looking for product support, you should probably be contacting people that provide these services :-) We will eventually get around to testing all of these devices, but those of us working on this are likely to have different priorities.

Yes, what I meant is that I needed PCI support and wanted to know if it was OK, the chips I connect on it are supported.

I just forgot to ask if the AC97 stuff was already supported by the ALSA stuff in the kernel ?

Thanks for the info
Munaut Sylvain

#4 lore raw
In reply to Pete Popov
Quoted 5 lines · Pete Popov
Quoted 2 lines · Sylvain Munaut

Hi

Quoted 10 lines
Quoted 3 lines

For a new design, we're considering Alchemy Au1500 processor family. I'd like to know what is the current state of the linux 2.6 on this platforms / experiences ?

I'm working on it right now but it will take a bit more time to get everything done. I have a beta version of the 36 bit address patch that's required for the PCI and PCMCIA.

Ok. Is it available on some CVS / www page ?
If we eventually choose Au1500 as platform I may be able to test it as well and bug reports.

Sylvain Munaut

#5 lore raw
Quoted 4 lines

Ok. Is it available on some CVS / www page ?
If we eventually choose Au1500 as platform I may be able to test it as well and bug reports.

No yet, but I'll email it to the mailing list in the next couple of days. I would consider it Beta.

Just curious, why 2.6? 2.4 is solid, everything works, provides a mature kernel and drivers ...?

Pete

#6 lore raw
Quoted 9 lines · Pete Popov
Quoted 3 lines

Ok. Is it available on some CVS / www page ?
If we eventually choose Au1500 as platform I may be able to test it as well and bug reports.

No yet, but I'll email it to the mailing list in the next couple of days. I would consider it Beta.

Just curious, why 2.6? 2.4 is solid, everything works, provides a mature kernel and drivers ...?

Because in the not too far future the Linux community will largely run away from 2.4? In fact the motivation of many developers to continue with 2.4 is quite down already and Marcelo is going to put 2.4 into deep freeze after 2.4.25.

Ralf

#7 lore raw
Quoted 11 lines
Quoted 11 lines
Quoted 6 lines

Ok. Is it available on some CVS / www page ?
If we eventually choose Au1500 as platform I may be able to test it as well and bug reports.

No yet, but I'll email it to the mailing list in the next couple of days. I would consider it Beta.

Ok, anyway I don't yet have a board ...

Quoted 5 lines
Quoted 4 lines

Just curious, why 2.6? 2.4 is solid, everything works, provides a mature kernel and drivers ...?

Quoted 7 lines

Because in the not too far future the Linux community will largely run away from 2.4? In fact the motivation of many developers to continue with 2.4 is quite down already and Marcelo is going to put 2.4 into deep freeze after 2.4.25.

Yes that's one of my main reason. And by the time the products ships to customers it will be tested. I think that one more person testing it is one more person able to find/debug problems. There are also some features that are natively in 2.6 and requires external patches / drivers in a 2.4 series kernel ( ipsec, preemption, alsa, ... )

Sylvain Munaut

#8 lore raw
In reply to Ralf Baechle
Quoted 4 lines · Ralf Baechle

Because in the not too far future the Linux community will largely run away from 2.4? In fact the motivation of many developers to continue with 2.4 is quite down already and Marcelo is going to put 2.4 into deep freeze after 2.4.25.

As someone that does _product_ development, 2.4 is going to be used for a long time. It may not be interesting to people with the goal of software modification, but when you are deploying real devices to real customers, people finding bugs is the last thing you want to see.

	-- Dan