Skip to contentSkip to conversation

Another PIII Coppermine user

DISCUSSION Philippe Fischer 2 participants 2 messages Jan 30, 2004

lore
Share & tools
lore
#0 lore raw

Hello all,

I've tried to get the speedstep_smi module work on my Vaio SR21k with the params smi_port=0xb2 and smi_cmd=0x80 but I've got an error message that my chipset is not supported.

Speedstep_detect generates following output :

_________________________________________________________
dmi_scan: return:
DMI 2.1 present.
27 structures occupying 891 bytes.
DMI table at 0x000F2040.
BIOS Vendor: Phoenix Technologies LTD
BIOS Version: R0208D1
BIOS Release: 01/05/01
System Vendor: Sony Corporation Product Name: PCG-SR21K(DE) Version: 01 Board Vendor: Sony Corporation Board Name: PCG-SR21K(DE) Board Version: 01 Trying Intel's int15 GSIC:
BIOS support GSIC call:
signature: GSIC
command port = 0x00b2

   command =      0x0080
   event port =   0x000000b3
   flags =        0x07d00100

probing chipsets: Found PIIX4
pmbase at 0x8000
Dumping PM IO register for this southbridge:
PMCNTRL (0x8004): 0x1403

(0x8006):         0x0000
GPEN (0x800e):    0x0f00
PCNTRL (0x8010):  0x00003204
(0x8016):         0x0000
DEVSTS (0x801c):  0x00000000
GLBLEN (0x8020):  0x0000
(0x8022):         0x00000000
GLBCTL (0x8028):  0x0301ff05
DEVCTL (0x802c):  0x01000000
GPIs: (0x8030):   0x26827b
(0x8033):         0x00
GPOs: (0x8034):   0x54bfffff
(0x8038):         0x7b 0x82 0x26 0x00 0xff 0xff 0xbf 0x54

You need to boot on AC and battery and see if GPOs change. Then, see if one bit change in between, you have then to note the number of this bit. This will be the gpo_hilo= number kernel option for enabling the speedstep-piix4 module under Linux.

                                     ..28..24..20..16..12...8...4...0
       GPOs: (0x8034):   0x54bfffff  01010100101111111111111111111111

__________________________________________________________________

Should I try the PIIX4 module? If so, where can I find it for kernel 2.6.1 ?

Best regards

Philippe

#1 lore raw
Quoted 7 lines · Philippe Fischer

Hello all,

I've tried to get the speedstep_smi module work on my Vaio SR21k with the params
smi_port=0xb2 and smi_cmd=0x80 but I've got an error message that my chipset is not supported.

Can you try with smi_cmd=0x82 instead before playing with -piix4 ?

It seems that there are a lot of laptops for which the int15 call return 0x80 for the command, but is actually 0x82 (those laptops also include an entry in the registry under Windows in order to get the correct parameter).

Signature · 4 lines
Ducrot Bruno

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.