add device id to radeonfb for 2.6.2
Subsystems (2)
PATCH 1/1 add device id to radeonfb for 2.6.2
The attached patch adds the pci id 5961 to radeonfb. Without the patch my 9200 displays only a blank screen. lspci output below. The patch is against 2.6.2.
05:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV280 [Radeon 9200] (rev 01) (prog-if 00 [VGA])
Subsystem: Giga-byte Technology: Unknown device 4018
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 16
Memory at e0000000 (32-bit, prefetchable) [size=128M]
I/O ports at b800 [size=256]
Memory at feaf0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Capabilities: [50] Power Management version 2
Signature · 1 line
Andreas Steinmetz
drivers/video/radeonfb.c +2 -0
@@ -114,6 +114,7 @@ RADEON_Ie, RADEON_If, RADEON_Ig, + RADEON_Ya, RADEON_Yd, RADEON_Ld, RADEON_Le,
@@ -208,6 +209,7 @@ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ie, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ie}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_If, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_If}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ig, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ig}, + { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ya, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ya}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Yd, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Yd}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Ld, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Ld}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_Le, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RADEON_Le},
include/linux/pci_ids.h +1 -0
@@ -291,6 +291,7 @@#define PCI_DEVICE_ID_ATI_RADEON_Ig 0x4967/* Radeon RV280 (9200) */ #define PCI_DEVICE_ID_ATI_RADEON_Y_ 0x5960 +#define PCI_DEVICE_ID_ATI_RADEON_Ya 0x5961#define PCI_DEVICE_ID_ATI_RADEON_Yd 0x5964/* Radeon R300 (9500) */ #define PCI_DEVICE_ID_ATI_RADEON_AD 0x4144