Skip to contentSkip to conversation

2.6.2: "-" or "_", thats the question

DISCUSSION Harald Dunkel 5 participants 8 messages Feb 11, 2004 – Feb 19, 2004

lore
Share & tools
lore
#0 lore raw

Hi folks,

'cat /proc/modules' returns most (all?) of the module names with "_", e.g.

	:
	ipt_conntrack
	ip_conntrack
	iptable_filter
	ip_tables
	uhci_hcd
	ohci_hcd
	ehci_hcd
	:

Very consistent. But the filenames of some kernel modules are still written with "-", e.g.

	/lib/modules/2.6.2/kernel/drivers/usb/host/ehci-hcd.ko
	/lib/modules/2.6.2/kernel/drivers/usb/host/ohci-hcd.ko
	/lib/modules/2.6.2/kernel/drivers/usb/host/uhci-hcd.ko

What would be the correct way to get the filename of a loaded module? The basename would be sufficient.

Regards

Harri

#1 lore raw
Quoted 26 lines · Harald Dunkel

Hi folks,

'cat /proc/modules' returns most (all?) of the module names with "_", e.g.

    :
    ipt_conntrack
    ip_conntrack
    iptable_filter
    ip_tables
    uhci_hcd
    ohci_hcd
    ehci_hcd
    :

Very consistent. But the filenames of some kernel modules are still written with "-", e.g.

    /lib/modules/2.6.2/kernel/drivers/usb/host/ehci-hcd.ko
    /lib/modules/2.6.2/kernel/drivers/usb/host/ohci-hcd.ko
    /lib/modules/2.6.2/kernel/drivers/usb/host/uhci-hcd.ko

What would be the correct way to get the filename of a loaded module? The basename would be sufficient.

Quoted 10 lines

Regards

Harri
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

The symbole names used in source code, like function names tend to use "_", while the file names use "-" IMHO.

Coywolf Qi Hunt

#2 lore raw
Quoted 9 lines · Coywolf Qi Hunt
Quoted 5 lines · Harald Dunkel

What would be the correct way to get the filename of a loaded module? The basename would be sufficient.

The symbole names used in source code, like function names tend to use "_", while the file names use "-" IMHO.

Naturally the symbols in the code use '_', cause for C '-' is not allowed within symbol names.

I am interested in the module file names. 'cat /proc/modules' should return the correct module names, but for some modules (like uhci_hcd vs uhci-hcd.ko) '_' and '-' are messed up.

Regards

Harri

#3 lore raw
Quoted 12 lines · On Sun, 15 Feb 2004 10:58:54 +0100 Harald Dunkel <[email protected]>…
Quoted 10 lines · Coywolf Qi Hunt
Quoted 5 lines · Harald Dunkel

What would be the correct way to get the filename of a loaded module? The basename would be sufficient.

The symbole names used in source code, like function names tend to use "_", while the file names use "-" IMHO.

Quoted 6 lines

Naturally the symbols in the code use '_', cause for C '-' is not allowed within symbol names.

I am interested in the module file names. 'cat /proc/modules' should return the correct module names, but for some modules (like uhci_hcd vs uhci-hcd.ko) '_' and '-' are messed up.

We canonicalize them at every point: you can use both.

Most users don't want to remember that it's ip_conntrack but uhci-hcd.

Hope that clarifies,
Rusty.

Signature · 2 lines
   there are those who do and those who hang on and you don't see too
   many doers quoting their contemporaries.  -- Larry McVoy
#4 lore raw
Quoted 1 line · Rusty Russell

Most users don't want to remember that it's ip_conntrack but uhci-hcd.

I'd like to chime in about this.

I'd prefer it be - all the way around (I know I can use either). Since I can ask for module uhci_hcd or uhci-hcd and get uhci-hcd.ko loaded, I've been using -. It's a bit easier to type since I don't have to hit shift for each _

Signature · 1 line
 Lab tests show that use of micro$oft causes cancer in lab animals
#5 lore raw
Quoted 5 lines · Wakko Warner
Quoted 1 line · Rusty Russell

Most users don't want to remember that it's ip_conntrack but uhci-hcd.

Quoted 7 lines

I'd like to chime in about this.

I'd prefer it be - all the way around (I know I can use either). Since I can ask for module uhci_hcd or uhci-hcd and get uhci-hcd.ko loaded, I've been using -. It's a bit easier to type since I don't have to hit shift for each _

It is really not important here whether anybody prefers '_' or '-'. IMHO everybody should be free to use both, even within one symbol filename.

What I do not like is that /proc/modules lies about the names of the loaded modules. I can understand that you are not affected by this problem, because all you see is module-init-tools, but others _are_ affected.

Regards

Harri

#6 lore raw
Quoted 10 lines
Quoted 9 lines
Quoted 1 line

Most users don't want to remember that it's ip_conntrack but uhci-hcd.

I'd like to chime in about this.

I'd prefer it be - all the way around (I know I can use either). Since I can ask for module uhci_hcd or uhci-hcd and get uhci-hcd.ko loaded, I've been using -. It's a bit easier to type since I don't have to hit shift for each _

Quoted 3 lines

It is really not important here whether anybody prefers '_' or '-'. IMHO everybody should be free to use both, even within one symbol filename.

That's good. This is pretty much all I want =)

Quoted 4 lines

What I do not like is that /proc/modules lies about the names of the loaded modules. I can understand that you are not affected by this problem, because all you see is module-init-tools, but others _are_ affected.

I did not realize that /proc/modules lied. From a user standpoint, it may not be /proc/modules lying, it may be module-init-tools lying to the kernel about the module it just loaded. I don't know, I have not looked at the code for module-init-tools. I checked one of my 2.6 machines and indeed all modules are with an _ instead of a -

When I first noticed that [eou]hci_hcd was loaded I figured all modules were using _ now. When I was playing with alsa it never clicked in about the - and _. I see now that it's _ in /proc/modules.

[OT] why is the usb drivers named with -hcd at the end anyway?

Signature · 1 line
 Lab tests show that use of micro$oft causes cancer in lab animals
#7 lore raw

On Wed, 18 Feb 2004 12:25:23 -0500 Wakko Warner <[email protected]> wrote:

| When I first noticed that [eou]hci_hcd was loaded I figured all modules were
| using _ now.  When I was playing with alsa it never clicked in about the -
| and _.  I see now that it's _ in /proc/modules.
| 
| [OT] why is the usb drivers named with -hcd at the end anyway?

Because some USB drivers are for USB devices (no -hcd at end) and some of them are USB host controller drivers (HCDs), not for USB devices per se. It's just a simple differeniation.

--
~Randy