2.6.3 RT8139too NIC problems
Quoted 7 lines
Funnily enough, I looked at this at work today and decided to check against
8139too.cfrom 2.6.2 and 2.6.3 trees. There was a lot of changes, but it appeared only to that file (i.e. nothing referencing it) - so I have just built 2.6.3 with the8139too.csource from 2.6.2 just to make sure it isn't code elsewhere (i.e. pci stuff?) that is causing it.
Quoted 6 lines
So far it is running perfectly. I will wait a while to test, and if it doesn't show any problems, we can presume it is the changes that caused this problem for me on my system.
Enquiries to the HantsLUG seem to be that no-one else gets this problem.
This has solved the problem for me. Please can anyone tell me what details are required to provide a bug report on this strange one off issue, as I wouldn't know where to start.
To recap:
rtl8139too cards worked on all kernels up until 2.6.3 (like 3 years).
The timeout issues started with 2.6.3 (using make oldconfig)... new settings applied.
Tried lilo 'append="noapic" -> problem still persisted.
After reading I changed: 2.6.2 source-> 8139too.c to replace new 2.6.3 source-> 8139too.c -> rebuilt with same .config. No timeouts - all hunky dory.
Thanks,
Nick
[root@Linux233 log]# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C585VP [Apollo VP1/VPX] (rev 23)
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 27)
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) 00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 02) 00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Signature · 4 lines
"When you're chewing on life's gristle, Don't grumble, Give a whistle And this'll help things turn out for the best."