drivers/ide IDE_MIN/IDE_MAX removal
Subsystems (2)
PATCH 1/1 drivers/ide IDE_MIN/IDE_MAX removal
Patch (against 2.6.3) removes unnecessary min/max macros and changes calls to use kernel.h macros instead.
Best Regards
Michael
include/linux/ide.h +0 -2
@@ -237,8 +237,6 @@#define SECTOR_SIZE 512#define SECTOR_WORDS (SECTOR_SIZE / 4)/* number of 32bit words per sector */ #define IDE_LARGE_SEEK (b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t))) -#define IDE_MIN (a,b) ((a)<(b) ? (a):(b)) -#define IDE_MAX (a,b) ((a)>(b) ? (a):(b))/* * Timeouts for various operations:
drivers/ide/legacy/qd65xx.c +1 -1
@@ -262,7 +262,7 @@if (drive->id && !qd_find_disk_type (drive, &active_time, &recovery_time)) { pio =ide_get_best_pio_mode (drive, pio,255 , &d); - pio =IDE_MIN (pio,4 ); + pio =min_t (u8, pio,4 );switch (pio) {case 0 :break ;
drivers/ide/pci/cmd64x.c +1 -1
@@ -200,7 +200,7 @@*/ if (channel) { drive->drive_data = setup_count; - setup_count =IDE_MAX (drives[0 ].drive_data, + setup_count =max (drives[0 ].drive_data, drives[1 ].drive_data);cmdprintk ("Secondary interface, setup_count = %d\n" , setup_count);
drivers/ide/pci/via82cxxx.c +1 -1
@@ -375,7 +375,7 @@return ; } -via_set_drive (drive,XFER_PIO_0 +MIN (pio,5 )); +via_set_drive (drive,XFER_PIO_0 +min_t (u8, pio,5 )); }/**
drivers/ide/ide-io.c +1 -1
@@ -743,7 +743,7 @@ && 0 < (signed long)(WAKEUP(drive) - (jiffies - best->service_time)) && 0 < (signed long)((jiffies + t) - WAKEUP(drive))) { -ide_stall_queue (best,IDE_MIN (t,10 *WAIT_MIN_SLEEP )); +ide_stall_queue (best,min_t (long, t,10 *WAIT_MIN_SLEEP )); goto repeat; } }while ((drive = drive->next) != best);
drivers/ide/ide-proc.c +2 -2
@@ -523,8 +523,8 @@ }if (*p !=':' ) goto parse_error; - len =IDE_MIN (p - start,MAX_LEN ); -strncpy (name, start,IDE_MIN (len,MAX_LEN )); + len =min (p - start,MAX_LEN ); +strncpy (name, start,min (len,MAX_LEN )); name[len] =0 ;if (n >0 ) {
drivers/scsi/ide-scsi.c +5 -5
@@ -145,7 +145,7 @@idescsi_discard_data (drive, bcount);return ; } - count =IDE_MIN (pc->sg->length - pc->b_count, bcount); + count =min (pc->sg->length - pc->b_count, bcount); buf =page_address (pc->sg->page) + pc->sg->offset;atapi_input_bytes (drive, buf + pc->b_count, count); bcount -= count; pc->b_count += count;
@@ -167,7 +167,7 @@idescsi_output_zeros (drive, bcount);return ; } - count =IDE_MIN (pc->sg->length - pc->b_count, bcount); + count =min (pc->sg->length - pc->b_count, bcount); buf =page_address (pc->sg->page) + pc->sg->offset;atapi_output_bytes (drive, buf + pc->b_count, count); bcount -= count; pc->b_count += count;
@@ -354,7 +354,7 @@if (!test_bit (PC_WRITING , &pc->flags) && pc->actually_transferred && pc->actually_transferred <=1024 && pc->buffer) {printk (", rst = " ); scsi_buf = pc->scsi_cmd->request_buffer; -hexdump (scsi_buf,IDE_MIN (16 , pc->scsi_cmd->request_bufflen)); +hexdump (scsi_buf,min_t (int,16 , pc->scsi_cmd->request_bufflen)); }else printk ("\n" ); } }
@@ -371,7 +371,7 @@static inline unsigned long get_timeout (idescsi_pc_t *pc) { -return IDE_MAX (WAIT_CMD , pc->timeout - jiffies); +return max_t (long,WAIT_CMD , pc->timeout - jiffies); }/*
@@ -515,7 +515,7 @@ scsi->pc=pc;/* Set the current packet command */ pc->actually_transferred=0 ;/* We haven't transferred any data yet */ pc->current_position=pc->buffer; - bcount.all =IDE_MIN (pc->request_transfer,63 *1024 );/* Request to transfer the entire buffer at once */ + bcount.all =min (pc->request_transfer,63 *1024 );/* Request to transfer the entire buffer at once */ feature.all =0 ;if (drive->using_dma && rq->bio) {
_______________________________________________
Kernel-janitors mailing list
[email protected]
http://lists.osdl.org/mailman/listinfo/kernel-janitors