Skip to contentSkip to conversation

U-BOOT for MPC860T customized board

DISCUSSION RamanaYV 1 participant 1 message Feb 27, 2004

lore
Share & tools
lore

RamanaYV

author
#0 lore raw

I have customised board with MPC860T,16MBytes of flash,16MBytes of SDRAM and ethernet interface.

CS0 is using for flash and CS1 is for SDRAM.

is there any standard board with this configuration.

so,that i can use that board configuration for U-BOOT.

thanking u
Ramana

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/