Skip to contentSkip to conversation

Hard locks under high interrupt load?

DISCUSSION Dan Creswell 3 participants 5 messages Feb 27, 2004

lore
Share & tools
lore
#0 lore raw

I'm having zero success in getting 2.6.3 stable under interrupt load. I can kill my machine in a variety of fashions all of which appear, to my naive eye, related to interrupt load:

(1) LAN traffic via E1000 card (X is not running)
(2) Running X for more than a few minutes - starting up a couple of applications whilst performing some disk-based activity (such as a compile) usually seems to do the trick.

(2) is worth a little more examination. I have an NVIDIA card (I can hear you all groan) *but* I get the same results with the XFree driver *or* the proprietary NVIDIA driver.

Disabling IO-APIC usage seems to resolve the problem.

Machine is a dual Xeon, Tyan S2665 (E7505 chipset) with an MPT-Fusion SCSI controller.

2.4.26-pre1 and various other 2.4 kernels give me no problems at all. I really want to switch my machines over to 2.6 but I can't whilst this problem persists.

Cheers,

Dan.

#1 lore raw
Quoted 9 lines · Dan Creswell

I'm having zero success in getting 2.6.3 stable under interrupt load. I can kill my machine in a variety of fashions all of which appear, to my naive eye, related to interrupt load:

(1) LAN traffic via E1000 card (X is not running)
(2) Running X for more than a few minutes - starting up a couple of
applications whilst performing some disk-based activity (such as a compile) usually seems to do the trick.

Quoted 5 lines

(2) is worth a little more examination. I have an NVIDIA card (I can hear you all groan) *but* I get the same results with the XFree driver *or* the proprietary NVIDIA driver.

Disabling IO-APIC usage seems to resolve the problem.

Does the 'noirqbalance' kernel parameter also serve as a workaround? Are you using any userspace irq balancers?

Quoted 6 lines

Machine is a dual Xeon, Tyan S2665 (E7505 chipset) with an MPT-Fusion SCSI controller.

2.4.26-pre1 and various other 2.4 kernels give me no problems at all. I really want to switch my machines over to 2.6 but I can't whilst this problem persists.

#2 lore raw

This box is running Fedora Core 1 and so, yes, it's running a userspace balance daemon (Redhat's).

I'll try out the noirqbalance option and get back to the list on that one.

Quoted 37 lines · Zwane Mwaikambo
Quoted 9 lines · Dan Creswell

I'm having zero success in getting 2.6.3 stable under interrupt load. I can kill my machine in a variety of fashions all of which appear, to my naive eye, related to interrupt load:

(1) LAN traffic via E1000 card (X is not running)
(2) Running X for more than a few minutes - starting up a couple of
applications whilst performing some disk-based activity (such as a compile) usually seems to do the trick.

Quoted 7 lines

(2) is worth a little more examination. I have an NVIDIA card (I can hear you all groan) *but* I get the same results with the XFree driver *or* the proprietary NVIDIA driver.

Disabling IO-APIC usage seems to resolve the problem.

Does the 'noirqbalance' kernel parameter also serve as a workaround? Are you using any userspace irq balancers?

Quoted 8 lines

Machine is a dual Xeon, Tyan S2665 (E7505 chipset) with an MPT-Fusion SCSI controller.

2.4.26-pre1 and various other 2.4 kernels give me no problems at all. I really want to switch my machines over to 2.6 but I can't whilst this problem persists.

#3 lore raw
Quoted 4 lines · Dan Creswell

This box is running Fedora Core 1 and so, yes, it's running a userspace balance daemon (Redhat's).

I'll try out the noirqbalance option and get back to the list on that one.

Could you also give a test run without the userspace balancer daemon and only the kernel one.

Thanks

#4 lore raw
In reply to Dan Creswell
Quoted 1 line · Dan Creswell

I'm having zero success in getting 2.6.3 stable under interrupt load. I can kill my machine in a variety of fashions all of which appear, to my naive eye, related to interrupt load:

There is a lockup problem in 2.6.3's e1000 that's solved in 2.6.3-bk snapshot.

Jeff