evms plugin for hptraid support <<<pre-alpha>>>
hi,
this is my attempt to add support for the ataraid devices to the 2.6 kernel. the code is as far as possible from being mature and useable as one could imagine (i have not even requested any plugin-ids for the evms engine). for now it only detects the HPT370A controller, because of i am
checking the pci-ids of the controller to prevent that any non-raid
disks are stolen by the raid module. this would happen with the current ataraid code from the kernel v2.4.
the attached patch applies against evms 2.2.2 and adds a bios module for handling the hpt-volumes. after running evms_activate the partitions on the raid volumes nodes are created as /dev/evms/hptraidXpY. X is the volume index and Y is the partition number. i succeeded in mounting a 4gb fat partition and tarring up the contents. more testing is still on my todo list.
the code is based on the local disk manager plugin and i hope i have got all the copyright stuff right.
the current features are:
* supports the HPT370A raid controller
* supports disk striping (raid-0)
* works with kernel 2.6 (tested with 2.6.2)
* the volume is scanned by the segment managers (dos & bsd) to create block devices for the partitions
todos:
* access to the last sector (kernel 2.6 only)
* add more controllers
* add mode raid levels
* create "whole disk" volume (currently only under .nodes)
* use sysfs for scanning
* get official evms plugin ids
* more modular design to make it easier to add code for other controllers
* more testing
i am sure i did it *all wrong* so comments are welcome. after all, this is the first thing that i ever did with evms. ;)
greetings,
wilfried
PS: can anyone get me a plugin id?
aclocal.m4 +14 -1
@@ -131,11 +131,16 @@ AC_ARG_ENABLE([rsct], [Disable the RSCT plugin]), [build_rsct="$enableval"], [build_rsct="yes"]) +AC_ARG_ENABLE([bios], + AC_HELP_STRING([--disable-bios], + [Disable the BIOS plugin]), + [build_bios="$enableval"], + [build_bios="yes"]) # Create the list of plugin directories to build. This is where each plugin # can specify its dependencies. plugin_dirs="" -plugin_distdirs="aix bbr bbr_seg bsd csm disk dos drivelink ext2 gpt ha jfs lvm mac md ogfs os2 reiser replace rsct s390 snapshot sparse swap xfs" +plugin_distdirs="aix bbr bbr_seg bsd csm disk dos drivelink ext2 gpt ha jfs lvm mac md ogfs os2 reiser replace rsct s390 snapshot sparse swap xfs bios" # AIX if test "$build_aix" = "no"; then
@@ -355,6 +360,14 @@ elif test "$have_uuid" = "no"; then else plugin_dirs="$plugin_dirs xfs" AC_MSG_NOTICE([ building xfs]) +fi + +# bios +if test "$build_bios" = "no"; then + AC_MSG_NOTICE([ not building bios ... disabled by user]) +else + plugin_dirs="$plugin_dirs bios" + AC_MSG_NOTICE([ building bios]) fi AC_SUBST(plugin_dirs)
configure +21 -2
@@ -866,6 +866,7 @@ Optional Features: --disable-jfs Disable the JFS FSIM --disable-reiser Disable the ReiserFS FSIM --disable-xfs Disable the XFS FSIM + --disable-bios Disable the BIOS plugin --disable-swap Disable the Swap FSIM --disable-replace Disable the Replace plugin --disable-ha Disable the HA plugin
@@ -10310,6 +10311,13 @@ if test "${enable_xfs+set}" = set; then else build_xfs="yes" fi; +# Check whether --enable-bios or --disable-bios was given. +if test "${enable_bios+set}" = set; then + enableval="$enable_bios" + build_bios="$enableval" +else + build_bios="yes" +fi; # Check whether --enable-swap or --disable-swap was given. if test "${enable_swap+set}" = set; then enableval="$enable_swap"
@@ -10342,7 +10350,7 @@ fi; # Create the list of plugin directories to build. This is where each plugin # can specify its dependencies. plugin_dirs="" -plugin_distdirs="aix bbr bbr_seg bsd csm disk dos drivelink ext2 gpt ha jfs lvm mac md ogfs os2 reiser replace rsct s390 snapshot sparse swap xfs" +plugin_distdirs="aix bbr bbr_seg bsd csm disk dos drivelink ext2 gpt ha jfs lvm mac md ogfs os2 reiser replace rsct s390 snapshot sparse swap xfs bios" # AIX if test "$build_aix" = "no"; then
@@ -10626,6 +10634,16 @@ else echo "$as_me: building xfs" >&6;} fi +# BIOS +if test "$build_bios" = "no"; then + { echo "$as_me:$LINENO: not building bios ... disabled by user" >&5 +echo "$as_me: not building bios ... disabled by user" >&6;} +else + plugin_dirs="$plugin_dirs bios" + { echo "$as_me:$LINENO: building bios" >&5 +echo "$as_me: building bios" >&6;} +fi +
@@ -10751,7 +10769,7 @@ fi - ac_config_files="$ac_config_files make.rules Makefile lib/Makefile lib/dlist/Makefile engine/Makefile plugins/Makefile plugins/aix/Makefile plugins/bbr/Makefile plugins/bbr_seg/Makefile plugins/bsd/Makefile plugins/csm/Makefile plugins/disk/Makefile plugins/dos/Makefile plugins/drivelink/Makefile plugins/ext2/Makefile plugins/gpt/Makefile plugins/ha/Makefile plugins/jfs/Makefile plugins/lvm/Makefile plugins/mac/Makefile plugins/md/Makefile plugins/ogfs/Makefile plugins/os2/Makefile plugins/reiser/Makefile plugins/replace/Makefile plugins/rsct/Makefile plugins/s390/Makefile plugins/snapshot/Makefile plugins/sparse/Makefile plugins/swap/Makefile plugins/xfs/Makefile ui/Makefile ui/cli/Makefile ui/gtk/Makefile ui/ncurses/Makefile ui/ncurses2/Makefile ui/utils/Makefile include/Makefile doc/Makefile doc/man/Makefile tests/Makefile" + ac_config_files="$ac_config_files make.rules Makefile lib/Makefile lib/dlist/Makefile engine/Makefile plugins/Makefile plugins/aix/Makefile plugins/bbr/Makefile plugins/bbr_seg/Makefile plugins/bsd/Makefile plugins/csm/Makefile plugins/disk/Makefile plugins/dos/Makefile plugins/drivelink/Makefile plugins/ext2/Makefile plugins/gpt/Makefile plugins/ha/Makefile plugins/jfs/Makefile plugins/lvm/Makefile plugins/mac/Makefile plugins/md/Makefile plugins/ogfs/Makefile plugins/os2/Makefile plugins/reiser/Makefile plugins/replace/Makefile plugins/rsct/Makefile plugins/s390/Makefile plugins/snapshot/Makefile plugins/sparse/Makefile plugins/swap/Makefile plugins/xfs/Makefile plugins/bios/Makefile ui/Makefile ui/cli/Makefile ui/gtk/Makefile ui/ncurses/Makefile ui/ncurses2/Makefile ui/utils/Makefile include/Makefile doc/Makefile doc/man/Makefile tests/Makefile" cat >confcache <<\_ACEOF
@@ -11335,6 +11353,7 @@ do "plugins/sparse/Makefile" ) CONFIG_FILES="$CONFIG_FILES plugins/sparse/Makefile" ;; "plugins/swap/Makefile" ) CONFIG_FILES="$CONFIG_FILES plugins/swap/Makefile" ;; "plugins/xfs/Makefile" ) CONFIG_FILES="$CONFIG_FILES plugins/xfs/Makefile" ;; + "plugins/bios/Makefile" ) CONFIG_FILES="$CONFIG_FILES plugins/bios/Makefile" ;; "ui/Makefile" ) CONFIG_FILES="$CONFIG_FILES ui/Makefile" ;; "ui/cli/Makefile" ) CONFIG_FILES="$CONFIG_FILES ui/cli/Makefile" ;; "ui/gtk/Makefile" ) CONFIG_FILES="$CONFIG_FILES ui/gtk/Makefile" ;;
plugins/bios/Makefile.in +52 -0
52 lines not on this page · raw message
plugins/bios/bios.c +1355 -0
1,355 lines not on this page · raw message
plugins/bios/bios.h +131 -0
131 lines not on this page · raw message
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 14 lines · Sergey Vlasov
Quoted 3 lines · On Fri, 27 Feb 2004 22:16:33 +0100 Wilfried Weissmann wrote:
this is my attempt to add support for the ataraid devices to the 2.6 kernel. the code is as far as possible from being mature and useable as one could imagine (i have not even requested any plugin-ids for the evms engine). for now it only detects the HPT370A controller, because of i am
checking the pci-ids of the controller to prevent that any non-raid
disks are stolen by the raid module. this would happen with the current ataraid code from the kernel v2.4.I'm not sure if this PCI ID checking is a good thing. With ataraid drivers, if your FakeRAID controller gets broken for some reason, you can just attach the disks to any available IDE controller and get access to your data. With the proposed PCI ID check this ability will be lost.
Quoted 3 lines
The problem with stale RAID superblocks on disks may be solved by adding a command to clear the RAID superblocks without touching the rest of data.
I can create a configuration option that controls or disables the PCI check. Claiming all disks that have raid signatures is a great feature for debugging and disaster recovery, but I think that if this is the default then it is more trouble than it is worth.
Regards,
Wilfried