Skip to contentSkip to conversation

Filters not working

LARTC Jose Araujo 1 participant 1 message Mar 1, 2004

lore
Share & tools
lore
#0 lore raw

Hy.

The solution I am going to give you might seem strange, but it worked with me on a project I'm working and hope to release soon.

Quoted 7 lines · Scott Gagon

tc class add dev $TC_DEV parent 1: classid 1:1 htb rate ${TC_UPLINK}kbit burst 6k

# high prio class 1:10:

tc class add dev $TC_DEV parent 1:1 classid 1:10 htb rate ${TC_UPLINK}kbit burst 6k prio 1

Remove the prio from your class configurations, it seem to cause some strange problems (at least with me, but i can't use the last htb version, mine is 3.1 something, can't check it now).

Quoted 2 lines

Thanks so much! I have to say, this has been a learning experience! :\

Hope it helps.

José Araújo

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/