ACPI battery info failure after some period of time, 2.6.3-x and up
powerix root # cat /proc/acpi/battery/BAT0/state
present: yes
ERROR: Unable to read battery status
powerix root # dmesg -c
ACPI-0279: *** Error: Looking up [BST0] in namespace, AE_ALREADY_EXISTS
ACPI-1120: *** Error: Method execution failed [\_SB_.BAT0._BST]
(Node e7bd7680), AE_ALREADY_EXISTS
powerix root # uname -r
2.6.4-rc1
This has been going on since about 2.6.3-rc something. Some while after reading the /proc files, the ability to read the battery information gets munged.
Quoted 9 lines · On 12:29 pm Mar 4 David Ford <[email protected]> wrote:
powerix root # cat
/proc/acpi/battery/BAT0/state
present: yes
ERROR: Unable to read battery statuspowerix root # dmesg -c
ACPI-0279: *** Error: Looking up [BST0] in namespace,
AE_ALREADY_EXISTSACPI-1120: *** Error: Method execution failed
[\_SB_.BAT0._BST] (Nodee7bd7680),AE_ALREADY_EXISTS
Quoted 6 lines
powerix root # uname -r
2.6.4-rc1This has been going on since about 2.6.3-rc something. Some while after reading the /proc files, the ability to read the battery information gets munged.
Same here on a Toshiba 1410-s173 noteboook:
[logger] ACPI group battery / action battery is not defined [kernel] ACPI-0279: *** Error: Looking up [BUFF] in namespace,
AE_ALREADY_EXISTS
I don't think it's happened in less than 24 hours of uptime, during which everything is good. I have been using suspend to ram daily if that matters (echo 3 > /proc/acpi/sleep).
Linux version 2.6.3-wolk1.0 (root@jackass) (gcc version 3.3.3 20040217 (Gentoo Linux 3.3.3, propolice-3.3-7)) #1 Thu Feb 26 16:18:24 CST 2004
\__ Jason Munro
\__ [email protected]
\__ http://hastymail.sourceforge.net/
Quoted 23 lines · Jason Munro
Quoted 9 lines · On 12:29 pm Mar 4 David Ford <[email protected]> wrote:
powerix root # cat
/proc/acpi/battery/BAT0/state
present: yes
ERROR: Unable to read battery statuspowerix root # dmesg -c
ACPI-0279: *** Error: Looking up [BST0] in namespace,
AE_ALREADY_EXISTSACPI-1120: *** Error: Method execution failed
[\_SB_.BAT0._BST] (Nodee7bd7680),AE_ALREADY_EXISTSQuoted 6 lines
powerix root # uname -r
2.6.4-rc1This has been going on since about 2.6.3-rc something. Some while after reading the /proc files, the ability to read the battery information gets munged.
Same here on a Toshiba 1410-s173 noteboook:
[logger] ACPI group battery / action battery is not defined [kernel] ACPI-0279: *** Error: Looking up [BUFF] in namespace,
AE_ALREADY_EXISTS
Quoted 6 lines
I don't think it's happened in less than 24 hours of uptime, during which everything is good. I have been using suspend to ram daily if that matters (echo 3 >
/proc/acpi/sleep).Linux version 2.6.3-wolk1.0 (root@jackass) (gcc version 3.3.3 20040217 (Gentoo Linux 3.3.3, propolice-3.3-7)) #1 Thu Feb 26 16:18:24 CST 2004
Happened once to me. I actually thought my battery was dying, so I went into the BIOS and did a battery cycle (full discharge). Hasn't come back since, but I'd guess that was a co-incidence. Probably needed it anyway.
Feb 21 18:32:10 kosh kernel: ACPI-0279: *** Error: Looking up [NACH] in namespace, AE_ALREADY_EXISTS Feb 21 18:32:10 kosh kernel: ACPI-1120: *** Error: Method execution failed
[\_SB_.BAT0._BST] (Node c7f88ba0), AE_ALREADY_EXISTS
Was running 2.6.3 (vanilla) at the time. Uptime at this point (first mention in logs) was ~1 day, 1 hour & 15 mins. Probably haven't had >24 hrs uptime since then. Will have this weekend (for testing).
Laptop is an Asus L7300/L7200 (PIII-600 on 440MX chipset) with the latest BIOS. Currently running 2.6.4-rc2 vanilla.
run a watch -n 1 'cat /proc.../status' and it'll happen really quick, on my machine it happens inside 15 minutes. my notebook is a dell inpsiron 8200.
Quoted 28 lines · Stuart Young
Quoted 6 lines · Jason Munro
Same here on a Toshiba 1410-s173 noteboook:
[logger] ACPI group battery / action battery is not defined [kernel] ACPI-0279: *** Error: Looking up [BUFF] in namespace,
AE_ALREADY_EXISTSQuoted 8 lines
I don't think it's happened in less than 24 hours of uptime, during which everything is good. I have been using suspend to ram daily if that matters (echo 3 >
/proc/acpi/sleep).Linux version 2.6.3-wolk1.0 (root@jackass) (gcc version 3.3.3 20040217 (Gentoo Linux 3.3.3, propolice-3.3-7)) #1 Thu Feb 26 16:18:24 CST 2004
Happened once to me. I actually thought my battery was dying, so I went into the BIOS and did a battery cycle (full discharge). Hasn't come back since, but I'd guess that was a co-incidence. Probably needed it anyway.
Feb 21 18:32:10 kosh kernel: ACPI-0279: *** Error: Looking up [NACH] in namespace, AE_ALREADY_EXISTS Feb 21 18:32:10 kosh kernel: ACPI-1120: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node c7f88ba0), AE_ALREADY_EXISTSWas running 2.6.3 (vanilla) at the time. Uptime at this point (first mention in logs) was ~1 day, 1 hour & 15 mins. Probably haven't had >24 hrs uptime since then. Will have this weekend (for testing).
Laptop is an Asus L7300/L7200 (PIII-600 on 440MX chipset) with the latest BIOS. Currently running 2.6.4-rc2 vanilla.
Quoted 3 lines · David Ford
run a watch -n 1 'cat /proc.../status' and it'll happen really quick, on my machine it happens inside 15 minutes. my notebook is a dell inpsiron 8200.
Tried it as soon as you sent me a reply using:
watch -n 1 'cat /proc/acpi/battery/BAT0/state'
...and it just failed then, using 2.6.4-rc2 still.
--
Stuart Young - [email protected] is for LKML and related email only
Quoted 1 line · Stuart Young
...and it just failed then, using 2.6.4-rc2 still.
have you tried applying patch from ...
ftp://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6.4/ acpi-20040220-2.6.4.diff.bz2
I'm on IBM X30, linux 2.6.4-rc2. No problem.
# uptime 13:02:07 up 3:31, 4 users, load average: 0.08, 0.07, 0.08
# cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: unknown present rate: 0 mW remaining capacity: 31780 mWh present voltage: 12419 mV
Jeff.
Quoted 4 lines · On 11:02 pm Mar 4 Jeff Chua <[email protected]> wrote:
Quoted 1 line · Stuart Young
...and it just failed then, using 2.6.4-rc2 still.
root@jackass /proc/acpi/battery/BAT1# watch -n 1 'cat ./state'
Over 30 minutes running and still looks fine. I use the GKACPI Gkrellm plugin which polls the battery status every 30 seconds I beleive. Since this started I have gone up to 2 + days uptime without it being triggered, but sometimes its less.
Quoted 5 lines
have you tried applying patch from ...
ftp://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release /2.6.4/
acpi-20040220-2.6.4.diff.bz2
The 2.6.3 patch from the same release day does not apply cleanly with the wolk patchset in place :/ I will try the latest with this patch and see what happens.
\__ Jason Munro
\__ [email protected]
\__ http://hastymail.sourceforge.net/
Hi,
I have had this problem (or at least very similar) since 2.6.0. the -test worked fine.
I run 2.6.3-gentoo-r1 on a Dell Inspiron 8600
Charles
Quoted 16 lines · On Thu, 04 Mar 2004 13:29:01 -0500 David Ford…
powerix root # cat
/proc/acpi/battery/BAT0/state
present: yes
ERROR: Unable to read battery statuspowerix root # dmesg -c
ACPI-0279: *** Error: Looking up [BST0] in namespace, AE_ALREADY_EXISTS ACPI-1120: *** Error: Method execution failed [\_SB_.BAT0._BST](Node
e7bd7680),AE_ALREADY_EXISTSpowerix root # uname -r
2.6.4-rc1This has been going on since about 2.6.3-rc something. Some while after reading the /proc files, the ability to read the battery information gets munged.
Quoted 4 lines
Quoted 4 lines
have you tried applying patch from ... ftp://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release /2.6.4/
acpi-20040220-2.6.4.diff.bz2
this patch did not help on my dell inspiron 3800. the battery status worked with 2.6.0, but it's been broken in the past couple versions. same as others were seeing:
ACPI-0279: *** Error: Looking up [BST0] in namespace, AE_ALREADY_EXISTS
ACPI-1120: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node d7fc7ba0), AE_ALREADY_EXISTS
i'm trying 2.6.4-rc2 with this acpi patch.
Signature · 3 lines
____________________}John Flinchbaugh{______________________
| [email protected] http://www.hjsoft.com/~glynis/ |
~~Powered by Linux: Reboots are for hardware upgrades only~~Quoted 15 lines · Jeff Chua
Quoted 1 line · Stuart Young
...and it just failed then, using 2.6.4-rc2 still.
have you tried applying patch from ...
ftp://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/release/2.6. 4/ acpi-20040220-2.6.4.diff.bz2
I'm on IBM X30, linux 2.6.4-rc2. No problem.
# uptime 13:02:07 up 3:31, 4 users, load average: 0.08, 0.07, 0.08
Quoted 7 lines
# cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: unknown present rate: 0 mW remaining capacity: 31780 mWh present voltage: 12419 mV
Same failure. Works for 15-20 mins, then it stops reporting anything past the battery being present.
--
Stuart Young - [email protected] is for LKML and related email only