Toshiba Portege M200 internal bluetooth adapter

Hi

I'm not totally sure how to use the internal bluetooth on my toshiba portege m200. I saw reports of "hci_usb + toshiba" for similar models but I have no idea what that means. usbfs doesn't show anything that looks like bluetooth but lspci -v reports one device I'm not sure about. Maybe that's it...

02:0d.0 System peripheral: Toshiba America Info Systems: Unknown device 0805 (rev 05)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: medium devsel, IRQ 11
Memory at 20000c00 (32-bit, non-prefetchable) [disabled] [size=512]
Capabilities: [80] Power Management version 2

Does anyone know if there's a chance it's supported?

Brad

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Hi Brad,

I am sure that your device is supported and I am sure that it is an USB Bluetooth adapter, but you have to activate it first. Take a look at this page

http://www.holtmann.org/linux/bluetooth/toshiba.html

and search through the mailing list archives.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Marcel

dmabt doesn't compile for me unless I make this change (but I'm not totally sure it's the right change):

@@ -37,7 +37,7 @@
 #include <sys/ioctl.h>              // for ioctl
 
 #define TOSH_DEVICE "/dev/toshiba"
-#define TOSH_SMM _IOWR('t',0x90,24)
+#define TOSH_SMM _IOWR('t',0x90,SMMRegisters)
 
 #define SLEEP 1 // duration of break between activating and attching
 #define TITLE "DMABTenable Version 0.2\n"

but even then it doesn't like the result:

jabbed:/usr/src/dmabt-0.2# ./dmabt
Can't access Toshiba device /dev/toshiba.
bmidgley@jabbed:~$ ls -l /dev/toshiba
crw-rw-rw-    1 root     root      10, 181 2004-03-06 17:07 /dev/toshiba

jabbed:/usr/src/dmabt-0.2# lsmod|grep tosh
toshiba_acpi            6108  0
toshiba                 4672  0

toshset has an option to turn on bluetooth but it doesn't do anything.

jabbed:/home/bmidgley# toshset -bluetooth on

jabbed:/home/bmidgley# more /proc/bus/usb/devices

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.3-mh4 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.3-mh4 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.3-mh4 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.3-mh4 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms

Does any of this require an APM bios? the M200 can't load the apm kernel mod because it has no APM bios.

Brad

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users