Skip to contentSkip to conversation

fsb of older cpu

DISCUSSION Bjoern Schmidt 4 participants 8 messages Mar 8, 2004

lore
Share & tools
lore
#0 lore raw

Hello,
is there a way to measure/change the fsb of a PII/233/Tonga/440BX while running linux? Google has no answer...

Signature · 2 lines
Greetings
Bjoern Schmidt
#1 lore raw
Quoted 3 lines · Bjoern Schmidt

Hello,
is there a way to measure/change the fsb of a PII/233/Tonga/440BX while running linux? Google has no answer...

This is the only one I know about, but it has support for a few boards/pll's only.

http://home.iprimus.com.au/mccvals/mvpll/

Hope it helps,
Bernd

#2 lore raw
Quoted 7 lines · Bernd Schubert
Quoted 3 lines · Bjoern Schmidt

Hello,
is there a way to measure/change the fsb of a PII/233/Tonga/440BX while running linux? Google has no answer...

Quoted 6 lines

This is the only one I know about, but it has support for a few boards/pll's only.

http://home.iprimus.com.au/mccvals/mvpll/

Hope it helps,
Bernd

Hello and thank you for your answer. I determined that this cpu has a fsb of 66MHz. The reason for my question was that i want to underclock the cpu. I think it would be better to change the multiplier instead of changing the fsb. Therefore i read the msr register 0x02ah, tilted bit 27 and wrote it back, but the cpu clock is still the same. Why does that not work? Is it possible to change the multiplier at runtime at all?

Signature · 2 lines
Mit freundlichen Gruessen
Bjoern Schmidt
#3 lore raw
Quoted 6 lines · Bjoern Schmidt

Hello and thank you for your answer. I determined that this cpu has a fsb of 66MHz. The reason for my question was that i want to underclock the cpu. I think it would be better to change the multiplier instead of changing the fsb. Therefore i read the msr register 0x02ah, tilted bit 27 and wrote it back, but the cpu clock is still the same. Why does that not work? Is it possible to change the multiplier at runtime at all?

No, the multiplier is locked, you'll have more luck fiddling with the front side bus.

#6 lore raw
In reply to Bjoern Schmidt
Quoted 14 lines
Quoted 6 lines
Quoted 3 lines

Hello,
is there a way to measure/change the fsb of a PII/233/Tonga/440BX while running linux? Google has no answer...

Quoted 6 lines

This is the only one I know about, but it has support for a few boards/pll's only.

http://home.iprimus.com.au/mccvals/mvpll/

Hope it helps,
Bernd

Quoted 7 lines

Hello and thank you for your answer. I determined that this cpu has a fsb of 66MHz. The reason for my question was that i want to underclock the cpu. I think it would be better to change the multiplier instead of changing the fsb. Therefore i read the msr register 0x02ah, tilted bit 27 and wrote it back, but the cpu clock is still the same. Why does that not work? Is it possible to change the multiplier at runtime at all?

I'm no expert on the subject but as I recall the processor sets the internal clock (derived from fsb+multiplier) on startup so no matter what you do do the running cpu it won't change it.

// Stefan

#4 lore raw
In reply to Zwane Mwaikambo
Quoted 11 lines · Zwane Mwaikambo
Quoted 6 lines · Bjoern Schmidt

Hello and thank you for your answer. I determined that this cpu has a fsb of 66MHz. The reason for my question was that i want to underclock the cpu. I think it would be better to change the multiplier instead of changing the fsb. Therefore i read the msr register 0x02ah, tilted bit 27 and wrote it back, but the cpu clock is still the same. Why does that not work? Is it possible to change the multiplier at runtime at all?

Quoted 2 lines

No, the multiplier is locked, you'll have more luck fiddling with the front side bus.

That would be the first P2/233 with a locked multiplier I've come across. My P2's ranging from 233 to 350 were never multiplier locked anyway. Celerons and P3's were multiplier locked however, maybe that's what you're thinking about.

// Stefan

#7 lore raw
In reply to Stefan Smietanowski
Quoted 3 lines · Stefan Smietanowski

I'm no expert on the subject but as I recall the processor sets the internal clock (derived from fsb+multiplier) on startup so no matter what you do do the running cpu it won't change it.

I think there must be a way. In the BIOS there ist an option "half processor
clock it is in idle". One time i have seen in /proc/cpuinfo" that the clock
was at ~118MHz, but that is 6 Month ago and i have this never seen again...
The problem is that with activated acpi the passive cooling does not seem to work although the cpu is very often in C2 and throttling mode is at 8. C1 is called extrem rarely (~1000 times per day), even if the system is under heavy load for a long time. I believe that C2 is not really supported by the cpu.

Signature · 2 lines
Greetings
Bjoern Schmidt
#5 lore raw
In reply to Stefan Smietanowski
Quoted 7 lines · Stefan Smietanowski
Quoted 2 lines

No, the multiplier is locked, you'll have more luck fiddling with the front side bus.

That would be the first P2/233 with a locked multiplier I've come across. My P2's ranging from 233 to 350 were never multiplier locked anyway. Celerons and P3's were multiplier locked however, maybe that's what you're thinking about.

There were lots of locked P1s for example, the last unlocked pentium+ processor i came across was a 133, but i stopped caring/checking after a while anyway.