Skip to contentSkip to conversation

Kernel panic with SLES8.0

DISCUSSION Sesha Muneendra Swameejee Panda 2 participants 5 messages Mar 10, 2004 – Mar 11, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

I have installed the SLES8.0 on a LX50 server. The installation went fine. While coming up the kernel panics with the below message.

kernel panic: VFS: Unable to mount root fs on 08:03

I have tried the workaround by give mem=2048M for boot options . This does not work and give the same problem.

Can anyone of you throw light on this?

Your help is highly appreciated.

Signature · 2 lines
Regards,
P.S.M.Swamiji
#1 lore raw

Hi,

The follwing are the detailed messages while kernel panic.

------
Pending list:
Kernel Free SCB list: 3 1 0
DevQ(0:0:0): ) waiting
DevQ(0:0:0): ) waiting
aic7xxx_abort returnss 0x2002
scsi: device set offline - not ready or command retry failed after bus reset: ho st 1 channel 0 id 15 lun 0
Loading module ext3 ...
Using /lib/modules/2.4.19-64GB-SMP/kernel/fs/ext3/ext3.0
kmod: failed to exec /sbin/modprobe -s -k block-major-8, errno = 2
VFS: Cannot open root device "sda2" or 08:02
Please append a correct "root=" boot option
kernel panic: VFS: Unable to mount root fs on 08:03
--------

The system has three partitions.

1. /dev/sda1  /boot   125 MB  ext3
2. /dev/sda2  /      30.5 GB  ext3
3. /dev/sda3  swap    3.5 GB  swap

And the RAM is 2048MB.

Boot options used : root=/dev/sda2 mem=2048M.

Any clues?

Thanks,
P.S.M.Swamiji

Quoted 14 lines · Sesha Muneendra Swameejee Panda

Hi,

I have installed the SLES8.0 on a LX50 server. The installation went fine. While coming up the kernel panics with the below message.

kernel panic: VFS: Unable to mount root fs on 08:03

I have tried the workaround by give mem=2048M for boot options . This does not work and give the same problem.

Can anyone of you throw light on this?

Your help is highly appreciated.

Signature · 6 lines
Regards,
P.S.M.Swamiji
Ph:2298989 x 27566

"LIFE IS ALREADY SHORT, DONT MAKE IT SHORTER by SMOKING OR
ARGUING."
#2 lore raw

On Mit, 2004-03-10 at 21:05, Sesha Muneendra Swameejee Panda wrote:
[...]

Quoted 1 line

Sesha Muneendra Swameejee Panda wrote:

[...]

Quoted 1 line
Quoted 1 line

I have installed the SLES8.0 on a LX50 server. The installation went

You should probably go to SuSE with the bug report since it is theirs product.

Bernd

Signature · 3 lines
Firmix Software GmbH                   http://www.firmix.at/
mobil: +43 664 4416156                 fax: +43 1 7890849-55
          Embedded Linux Development and Services
#3 lore raw

Hi Bernd,

Quoted 5 lines · Bernd Petrovitsch

On Mit, 2004-03-10 at 21:05, Sesha Muneendra Swameejee Panda wrote:
[...]

Quoted 1 line

Sesha Muneendra Swameejee Panda wrote:

Quoted 7 lines

[...]

Quoted 2 lines
Quoted 1 line

I have installed the SLES8.0 on a LX50 server. The installation went

You should probably go to SuSE with the bug report since it is theirs product.

As I am a new bite to linux world , I don't know the procedure to file bugs.

Can you please give the procedure or contact info of Suse to file the bug report.

Signature · 3 lines
Regards,
P.S.M.Swamiji
Ph:2298989 x 27566
#4 lore raw
Quoted 4 lines · Sesha Muneendra Swameejee Panda
Quoted 3 lines · Bernd Petrovitsch

On Mit, 2004-03-10 at 21:05, Sesha Muneendra Swameejee Panda wrote:
[...]

Quoted 1 line

Sesha Muneendra Swameejee Panda wrote:

Quoted 8 lines
Quoted 6 lines

[...]

Quoted 2 lines
Quoted 1 line

I have installed the SLES8.0 on a LX50 server. The installation went

You should probably go to SuSE with the bug report since it is theirs product.

As I am a new bite to linux world , I don't know the procedure to file bugs.

First I assume that SLES-8.0 means "Suse Linux Enterprsie Server 8.0".

Quoted 2 lines

Can you please give the procedure or contact info of Suse to file the bug report.

Their website is http://www.suse.com/. I don't know where exactly you are expected to ask that kind of questions or file bug reports.

In the current case the kernel is not able to mount the root file system (where pretty much the very important executables and libraries are around).
This problem has actually nothing to do with the kernel per se since he simply reports that (which is actually the second reason why the question is somewhta off-topic on the LKML).
Usually that means that at least one of the follwoign does not work:
-) the driver for IDE, SCSI or wherever the root filesystem is to be
found is not available
-) the driver of the filesystem which is used on the root filesystem is
not available.
-) some part of the hardware is broken - this can be the SCSI/IDE/...
controller itself, the disk, cables in between, etc.
The list is not complete - just what I would primarily expect.

Especially the
---- snip ----
aic7xxx_abort returnss 0x2002
scsi: device set offline - not ready or command retry failed after bus
reset: ho
---- snip ----
make me think that either the Adaptec controller or the disk (or the cable in between) have a serious hardware problem. But I'm no export in that area ....

Bernd

Signature · 3 lines
Firmix Software GmbH                   http://www.firmix.at/
mobil: +43 664 4416156                 fax: +43 1 7890849-55
          Embedded Linux Development and Services