Problems module autoload in 2.6.x
Hello
Kernel 2.6.4:
Some modules (floppy, lp, loop..) won´t be autoloaded any more since 2.4.21. There´s no block-major aso. request in the kernel-ring buffer. I have /etc/modules.conf and /etc/modprobe.conf with modutils-2.4.21-23.1 and depmod -V: module-init-tools 3.0-pre5. How can I track this down? Shouldn't be there a kmod process/ thread in the process list?
Sorry, if I miss something to read.
Signature · 16 lines
Tom LINUX user since kernel 0.99.x 1994. RPM Alpha packages at http://alpha.steudten.com/packages Want to know what S.u.S.E 1995 cdrom-set contains? - To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 1079490472.3400.114.camel@bach
Hi
2.6.4 on alpha:
zgrep -i mod /proc/config.gz
# Loadable module supportCONFIG_MODULES=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not setCONFIG_OBSOLETE_MODPARM=yCONFIG_MODVERSIONS=yCONFIG_KMOD=yCONFIG_IDEDISK_MULTI_MODE=y
grep -i floppy /etc/modprobe.conf
alias block-major-2-* floppy
strace -estat,open /sbin/modprobe -v floppy
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
open("/lib/libc.so.6.1", O_RDONLY) = 3
open("/etc/modprobe.conf", O_RDONLY) = 3open("/lib/modules/2.6.4/modules.dep", O_RDONLY) = 3open("/proc/modules", O_RDONLY) = 3open("/lib/modules/2.6.4/kernel/drivers/block/floppy.ko", O_RDONLY) = 3 insmod /lib/modules/2.6.4/kernel/drivers/block/floppy.ko
=> OK
without module floppy loaded:
mdir a:
Can't open /dev/fd0: No such device or address No msg in KRB (dmesg) and log from /tmp/modprobe.log => FAILED
modprobe -v floppy
insmod /lib/modules/2.6.4/kernel/drivers/block/floppy.ko => OK
mdir a:
=> OK
My questions are:
1. What process name has the "new" kmod? There´s no such process in the table.
2. What triggers to run the prog given in /proc/sys/kernel/modprobe ( for a missing device)?
Strange: Looks like there is no kmod build or loaded or .. I should look in detail about this..
Quoted 17 lines
Quoted 6 lines
Kernel 2.6.4:
Some modules (floppy, lp, loop..) won´t be autoloaded any more since 2.4.21. There´s no block-major aso. request in the kernel-ring buffer. I have/etc/modules.confand/etc/modprobe.confwith modutils-2.4.21-23.1 and depmod -V: module-init-tools 3.0-pre5. How can I track this down? Shouldn't be there a kmod process/ thread in the process list?Check you have
CONFIG_KMOD=y. If so, the correct way of debugging module problems is something like this:echo '#!
/bin/sh' >/tmp/modprobe
echo 'echo "$@" >>/tmp/modprobe.log' >>/tmp/modprobeecho 'exec/sbin/modprobe"$@"' >>/tmp/modprobechmod a+x/tmp/modprobe
echo/tmp/modprobe>/proc/sys/kernel/modprobe
Quoted 3 lines
Then do something that should cause the module to load: you'll see the command which gets called in
/tmp/modprobe.log. Then you can add "-v" and run it manually, hopefully providing enlightenment.
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Ok,
What I see:
In 2.4.x the modprobe has option -k [..], which
is set in the request_module() in kmod.c.
Also the string "(autoclean)" is printed for
lsmod, if the module was loaded with the -k
option for modprobe from the kernel.
The string is coded in the module.c in 2.4.x.
In kernel 2.6.x, I use 2.6.4, the option -k to
modprobe is gone. Also the request_module() call
in the kernel source, don´t set this option.
The lsmod or cat /proc/modules don't gives
the string "(autoclean)" any more. But that's
another point, don't know why this is gone..
What I have done to trace this down:
I have add a printk to the request_module()
call, to see what is happen there.
If I call mdir a:, the floppy module
isn´t requested in request_module().
Same problem for modules
- lp
- floppy
- loop
I thought if there's no request_module() call
in the kernel next to this module, the generic
one in
genhd.c for block devices and
static struct kobject *base_probe(dev_t dev, int *part, void *data)
{
printk( KERN_ERR "base_probe: enter %d %d\n",MAJOR(dev), MINOR(dev));
if (request_module("block-major-%d-%d", MAJOR(dev), MINOR(dev)) > 0)
/* Make old-style 2.4 aliases work */
request_module("block-major-%d", MAJOR(dev));
return NULL;
}
misc.c for char devices
static int misc_open(struct inode * inode, struct file * file)
{
int minor = iminor(inode);
struct miscdevice *c;
int err = -ENODEV;
struct file_operations *old_fops, *new_fops = NULL;
down(&misc_sem);
list_for_each_entry(c, &misc_list, list) {
if (c->minor == minor) {
new_fops = fops_get(c->fops);
break;
}
}
if (!new_fops) {
up(&misc_sem);
request_module("char-major-%d-%d", MISC_MAJOR, minor);But the modules aren't never requested. What is going wrong here? I just wonder, that nobody but me has this problem.
Another point to the missing autoload feature, is the autoclean support for modules. Why is this gone?
Please CC: me.
2.6.4 on alpha:
zgrep -i mod /proc/config.gz
# Loadable module supportCONFIG_MODULES=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not setCONFIG_OBSOLETE_MODPARM=yCONFIG_MODVERSIONS=yCONFIG_KMOD=yCONFIG_IDEDISK_MULTI_MODE=y
grep -i floppy /etc/modprobe.conf
alias block-major-2-* floppy
strace -estat,open /sbin/modprobe -v floppy
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
open("/lib/libc.so.6.1", O_RDONLY) = 3
open("/etc/modprobe.conf", O_RDONLY) = 3open("/lib/modules/2.6.4/modules.dep", O_RDONLY) = 3open("/proc/modules", O_RDONLY) = 3open("/lib/modules/2.6.4/kernel/drivers/block/floppy.ko", O_RDONLY) = 3 insmod /lib/modules/2.6.4/kernel/drivers/block/floppy.ko
=> OK
without module floppy loaded:
mdir a:
Can't open /dev/fd0: No such device or address No msg in KRB (dmesg) and log from /tmp/modprobe.log => FAILED
modprobe -v floppy
insmod /lib/modules/2.6.4/kernel/drivers/block/floppy.ko => OK
mdir a:
=> OK
My questions are:
1. What process name has the "new" kmod? There´s no such process in the table.
2. What triggers to run the prog given in /proc/sys/kernel/modprobe ( for a missing device)?
Strange: Looks like there is no kmod build or loaded or .. I should look in detail about this..
Quoted 17 lines
Quoted 6 lines
Kernel 2.6.4:
Some modules (floppy, lp, loop..) won´t be autoloaded any more since 2.4.21. There´s no block-major aso. request in the kernel-ring buffer. I have/etc/modules.confand/etc/modprobe.confwith modutils-2.4.21-23.1 and depmod -V: module-init-tools 3.0-pre5. How can I track this down? Shouldn't be there a kmod process/ thread in the process list?Check you have
CONFIG_KMOD=y. If so, the correct way of debugging module problems is something like this:echo '#!
/bin/sh' >/tmp/modprobe
echo 'echo "$@" >>/tmp/modprobe.log' >>/tmp/modprobeecho 'exec/sbin/modprobe"$@"' >>/tmp/modprobechmod a+x/tmp/modprobe
echo/tmp/modprobe>/proc/sys/kernel/modprobe
Quoted 3 lines
Then do something that should cause the module to load: you'll see the command which gets called in
/tmp/modprobe.log. Then you can add "-v" and run it manually, hopefully providing enlightenment.
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 6 lines · Thomas Steudten
In kernel 2.6.x, I use 2.6.4, the option -k to modprobe is gone. Also the
request_module()call in the kernel source, don´t set this option. The lsmod or cat/proc/modulesdon't gives the string "(autoclean)" any more. But that's another point, don't know why this is gone..
Because there's no autocleaning of modules any more. You'd wipe out your network modules every time, for a start.
Quoted 2 lines
If I call mdir a:, the floppy module isn´t requested in
request_module().
To debug this, please create a dummy modprobe like I suggested before. That will tell you (1) whether modprobe is being called when you do an mdir, and (2) what module it's asking for.
Cheers,
Rusty.
Signature · 6 lines
Anyone who quotes me in their signature is an idiot -- Rusty Russell - To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html