board.c patch got undone

U-Boot-Users Stephen Williams 2 participants 2 messages Mar 16, 2004 – Mar 23, 2004 1 message not in the archive

lore

Share & tools

lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Stephen Williams

author

2004-03-16 04:15 UTC #1 lore raw

Perhaps this is an even better patch:

===================================================================
RCS file: /cvsroot/u-boot/u-boot/README,v
retrieving revision 1.79

README 16 Mar 2004 04:12:44 -0000 renamed from README 14 Mar 2004 14:09:05 -0000 1.79 +2 -2

diff -p -u -r1.79 README
@@ -441,8 +441,8 @@ The following options need to be configu
                 (RTS/CTS) and UART's built-in FIFO. Set the number of
                 bytes the interrupt driven input buffer should have.
 
-               Set to 0 to disable this feature (this is the default).
-               This will also disable hardware handshake.
+               Leave undefined to disable this feature, including
+               disable the buffer and hardware handshake.
 
  - Console UART Number:
                 CONFIG_UART1_CONSOLE

Quoted 28 lines · Stephen Williams

It looks like in the last wave of changes, a patch got undone:
wing % cvs diff -r1.35 board.c
Index: board.c
===================================================================
RCS file: /cvsroot/u-boot/u-boot/lib_ppc/board.c,v retrieving revision 1.35
retrieving revision 1.36
diff -r1.35 -r1.36
877c877
< #if CONFIG_SERIAL_SOFTWARE_FIFO
---
Quoted 1 line
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
The "#if CONFIG_SERIAL_SOFTWARE_FIFO" is the right version, if one assumes the documentation is correct that setting CONFIG_SERIAL_SOFTWARE_FIFO=0 causes the serial port to become insensitive to CTS.
Perhaps it would be even better to change it to:
#if defined(CONFIG_SERIAL_SOFTWARE_FIFO) && CONFIG_SOFTWARE_FIFO>0
...
#endif

Signature · 4 lines

Steve Williams                "The woods are lovely, dark and deep.
steve at XXXXXXXXXX           But I have promises to keep,
http://www.XXXXXXXXXX         and lines to code before I sleep,
http://www.picturel.com       And lines to code before I sleep."

Wolfgang Denk

2004-03-23 21:10 UTC #2 lore raw

Quoted 2 lines · In message <[email protected]> you wrote:

Perhaps this is an even better patch:

...

Quoted 10 lines

Quoted 10 lines
The "#if CONFIG_SERIAL_SOFTWARE_FIFO" is the right version, if one assumes the documentation is correct that setting CONFIG_SERIAL_SOFTWARE_FIFO=0 causes the serial port to become insensitive to CTS.
Perhaps it would be even better to change it to:
#if defined(CONFIG_SERIAL_SOFTWARE_FIFO) && CONFIG_SOFTWARE_FIFO>0
...
#endif

Thanks, added.

Best regards,

Wolfgang Denk

Signature · 5 lines

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
If you want strict real-time behavior, run in the real  time  schedu-
ling class.  But there are no seatbelts or airbags;  main(){for(;;);}
can hard hang your system.                          -- Bart Smaalders