Skip to contentSkip to conversation

Serial card

DISCUSSION Janos Makadi 1 participant 1 message Mar 20, 2004

lore
Share & tools
lore
#0 lore raw

Hello,

I have a SWEEX i/o CARD, which has two serial, and one paralell ports. On the board is a Netmos (Moschip) Nm9835cv. Is it possible to use this card with the 2.6 series kernel? Im searching on the net two days now, but didnt found any information. Using setserial for setup failed.

lspci -v :

00:0b.0 Communication controller: Unknown device 9710:9835 (rev 01)

	Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device 0012
	Flags: medium devsel, IRQ 11
	I/O ports at b400 [disabled] [size=8]
	I/O ports at b000 [disabled] [size=8]
	I/O ports at a800 [disabled] [size=8]
	I/O ports at a400 [disabled] [size=8]
	I/O ports at a000 [disabled] [size=8]
	I/O ports at 9800 [disabled] [size=16]

/proc/pci :

Bus 0, device 11, function 0:
Communication controller: NetMos Technology 222N-2 I/O Card (2S+1P)
(rev 1).

      IRQ 11.
      Master Capable.  Latency=32.
      I/O at 0xb400 [0xb407].
      I/O at 0xb000 [0xb007].
      I/O at 0xa800 [0xa807].
      I/O at 0xa400 [0xa407].
      I/O at 0xa000 [0xa007].
      I/O at 0x9800 [0x980f].

Regards,
Janos