Skip to contentSkip to conversation

ACPI Shutdown 2.6.3

DISCUSSION Bruce Park 2 participants 3 messages Mar 21, 2004 – Mar 22, 2004

lore
Share & tools
lore

Bruce Park

author
#0 lore raw

Dear LMKL users,

I'm experiencing a problem with ACPI and it's ability to shutdown the machine. I'm currently using Debian GNU/Linux with the 2.6.3 kernel. Before I go on, if this is the wrong type of material to post on this list, I apologize in advance. Kindly state what I'm doing wrong and I will not make the same mistake.

The following information is about my mobo and BIOS:
Award Modular BIOS v6.0
04/29/2002 - SiS745
ASUS A7S333 ACPI BIOS rv 1006

When I run the shutdown command, the last thing I see is the following:
Power Down
acpi_power_off called
hwsleep_0265 [24] acpi_enter_sleep_state: Entering sleep state [S5]

Here is a result of 'grep -i acpi /var/log/kern.log'. After looking at the output, I realized that there was a pattern. I am pasting all the lines that aren't repetitious.
http://www.dolda2000.com/~bpark/kern.log

This is just the output of dmesg:
http://www.dolda2000.com/~bpark/dmesg.txt

I am using the testing release of Debian along with acpid version 1.0.3-2. The funny thing is, I have used Fedora Core 1 and even Windows 2000 with ACPI and have been able to shutdown the machine without any problems.

Any help is greatly appreciated.

bp

#1 lore raw
Quoted 2 lines · Bruce Park

I'm experiencing a problem with ACPI and it's ability to shutdown the machine. I'm currently using Debian GNU/Linux with the 2.6.3 kernel. Before

If you boot with the "nolapic" option, does the machine poweroff correctly then?

(This is the case on my Thinkpad T41 - 2.6.x doesn't powerdown unless I boot with "nolapic")

Signature · 4 lines
Jurjen Oskam

"Avoid putting a paging file on a fault-tolerant drive, such as a mirrored
volume or a RAID-5 volume. Paging files do not need fault-tolerance." - 308417
author
#2 lore raw
Quoted 12 lines · Jurjen Oskam
Quoted 1 line · Bruce Park

I'm experiencing a problem with ACPI and it's ability to shutdown the machine. I'm currently using Debian GNU/Linux with the 2.6.3 kernel. Before

If you boot with the "nolapic" option, does the machine poweroff correctly then?

(This is the case on my Thinkpad T41 - 2.6.x doesn't powerdown unless I boot with "nolapic")

I tried this last night. No success.

bp