How do I pvresize?
We started running out of space on our backup server, so I bought a couple of new 250Gb disks, added them to the 16 bay FC RAID array and expanded the RAID, followed by the slice.
I then went to expand the PV, and got a "Command not implemented yet." message.
This is a problem. This is a *BIG* problem.
What are my options, short of destroying the volume and starting from scratch?
I'm pretty new to LVM, so take my comment with a grain of salt.
Why do you need to resize the PV at all? If you need more space, create a new PV and add it to the LV, that should do the trick.
~David
Quoted 17 lines · Glen Harris
We started running out of space on our backup server, so I bought a couple of new 250Gb disks, added them to the 16 bay FC RAID array and expanded the RAID, followed by the slice.
I then went to expand the PV, and got a "Command not implemented yet." message.
This is a problem. This is a *BIG* problem.
What are my options, short of destroying the volume and starting from scratch?
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
I have already expanded the RAID slice by 250Gb, and now have a /dev/sda which is 250Gb larger than it was before.
I now cannot remove that disk without either rebuilding the RAID on the hot spare(back to square one) or destroying the RAID.
Please, can someone help me?
Quoted 33 lines · David Mohr
I'm pretty new to LVM, so take my comment with a grain of salt.
Why do you need to resize the PV at all? If you need more space, create a new PV and add it to the LV, that should do the trick.
~David
Quoted 9 lines · Glen Harris
We started running out of space on our backup server, so I bought a couple of new 250Gb disks, added them to the 16 bay FC RAID array and expanded the RAID, followed by the slice.
I then went to expand the PV, and got a "Command not implemented yet." message.
This is a problem. This is a *BIG* problem.
Quoted 8 lines
What are my options, short of destroying the volume and starting from scratch?
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Glen,
If you do a pvscan do you get 'PV "/dev/sda1" etc' or 'PV "/dev/sda" etc'
If you get the former could you not create /dev/sda2 with the extra 250GB and add that to the LV as a separate PV
I'm assuming that you can have different partitions on the same array (actual disk) defined as separate PVs
I may be completely off track here, please feel free to correct.....
Regards,
Chris.
-------------------
Chris Laycock
IT Specialist
IBM Global Services (IDO)
LITS, Stevenage
Mail point: K3 STEV UK
Email: [email protected]
Tel : (01438) 76-9460 (internal: 44-9460)
Please respond to LVM general discussion and development <[email protected]>
Sent by: [email protected] To: LVM general discussion and development <[email protected]>
cc:
Subject: Re: [linux-lvm] How do I pvresize?
I have already expanded the RAID slice by 250Gb, and now have a /dev/sda which is 250Gb larger than it was before.
I now cannot remove that disk without either rebuilding the RAID on the hot spare(back to square one) or destroying the RAID.
Please, can someone help me?
Quoted 28 lines · David Mohr
I'm pretty new to LVM, so take my comment with a grain of salt.
Why do you need to resize the PV at all? If you need more space, create a new PV and add it to the LV, that should do the trick.
~David
Quoted 9 lines · Glen Harris
We started running out of space on our backup server, so I bought a couple of new 250Gb disks, added them to the 16 bay FC RAID array and expanded the RAID, followed by the slice.
I then went to expand the PV, and got a "Command not implemented yet." message.
This is a problem. This is a *BIG* problem.
Quoted 8 lines
What are my options, short of destroying the volume and starting from scratch?
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 5 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
No, I used the raw device sda. I didn't bother partitioning it, as I knew I could expand the raid, and grow the PV just like I did back with LVM-1.
glen.
Quoted 87 lines · Chris Laycock
Glen,
If you do a pvscan do you get 'PV "
/dev/sda1" etc' or 'PV "/dev/sda"
etc'
If you get the former could you not create/dev/sda2with the extra 250GB and add that to the LV as a separate PV I'm assuming that you can have different partitions on the same array (actual disk) defined as separate PVs I may be completely off track here, please feel free to correct.....Regards,
Chris.
-------------------
Chris Laycock
IT Specialist
IBM Global Services (IDO)LITS, Stevenage
Mail point: K3 STEV UK
Email: [email protected]
Tel : (01438) 76-9460 (internal: 44-9460)Please respond to LVM general discussion and development <[email protected]>
Sent by: [email protected]
To: LVM general discussion and development <[email protected]>
cc: Subject: Re: [linux-lvm] How do I pvresize?I have already expanded the RAID slice by 250Gb, and now have a
/dev/sdawhich is 250Gb larger than it was before.I now cannot remove that disk without either rebuilding the RAID on the hot spare(back to square one) or destroying the RAID.
Please, can someone help me?
Quoted 28 lines · David Mohr
I'm pretty new to LVM, so take my comment with a grain of salt.
Why do you need to resize the PV at all? If you need more space, create a new PV and add it to the LV, that should do the trick.
~David
Quoted 9 lines · Glen Harris
We started running out of space on our backup server, so I bought a couple of new 250Gb disks, added them to the 16 bay FC RAID array and expanded the RAID, followed by the slice.
I then went to expand the PV, and got a "Command not implemented yet." message.
This is a problem. This is a *BIG* problem.
Quoted 8 lines
What are my options, short of destroying the volume and starting from scratch?
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/Quoted 5 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/------------------------------------------------------------------------
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/