USB Mounting Problem
Dear all ,
I have linux kernel running on an ARM platform. The problem is that the linux kernel doesn't recognize the USB flash if it was inserted before booting up the system. If the flash is inserted after the boot up of the kernel the flash is given the node /dev/sda1 or /dev/sdb1 and I can mount it.
My question is how to recognize the flash if it was inserted in the system before booting of the kernel.
I recompiled the kernel to include both scsi and usb storage (not to be as modules) but this doesn't work.
Need your support please
--
This message was sent on behalf of [email protected] at openSubscriber.com
http://www.opensubscriber.com/messages/[email protected]/topic.html
Am Montag 14 Juli 2008 16:10:21 schrieb [email protected]:
Quoted 10 lines
Dear all ,
I have linux kernel running on an ARM platform. The problem is that the linux kernel doesn't recognize the USB flash if it was inserted before booting up the system. If the flash is inserted after the boot up of the kernel the flash is given the node
/dev/sda1or/dev/sdb1and I can mount it.
My question is how to recognize the flash if it was inserted in the system before booting of the kernel.
I recompiled the kernel to include both scsi and usb storage (not to be as modules) but this doesn't work.Need your support please
Quoted 9 lines
--
This message was sent on behalf of [email protected] at openSubscriber.com
http://www.opensubscriber.com/messages/[email protected]/topic.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
You are asking on the wrong list. Go to:
usb-storage (at) lists.one-eyed-alien.net
Please include dmesg in your bug report, preferably from a kernel compiled with CONFIG_USB_STORAGE_DEBUG.
Regards
Oliver