Skip to contentSkip to conversation

flash.o flash.c errors

U-Boot 王培养 2 participants 2 messages Dec 31, 2009

lore
Share & tools
lore

王培养

author
#0 lore raw

hi all,
u-boot-1.3.4,which was ported to my board S3C44B0. after I make the commonds as follows:
1. make distclean? 2. make B2_config 3. make
then appear errors :
--------------------------------------------------------------
flash.o flash.c
In file included from flash.c:30:
../common/flash.c: In function `flash_get_size':
../common/flash.c:248: error: parse error before numeric constant make[1]: *** [flash.o] Error 1
make[1]: Leaving directory `/home/wpx/u-boot-1.3.4/board/dave/B2'
make: *** [board/dave/B2/libB2.a] Error 2
---------------------------------------------------------------
any help is appreciated.
?
regards,
Juan

      ___________________________________________________________ 

?????????????????
http://card.mail.cn.yahoo.com/

#1 lore raw

Dear =?utf-8?B?546L5Z+55YW7ICA=?=,

Quoted 2 lines · In message <[email protected]> you wrote:

u-boot-1.3.4,which was ported to my board S3C44B0.

U-Boot 1.3.4 is very old. Please update and use current code.

Quoted 3 lines

after I make the commonds as follows:
1. make distclean 2. make B2_config 3. make
then appear errors :

Please update and use current code.

Both the latest release and current top of tree build just fine.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"When the only  tool  you  have  is  a  hammer,  you  tend  to  treat
everything as if it were a nail."                    - Abraham Maslow