kernel 2.6 IPsec and netfilter
Hi,
I wanted to know whether there is a working solution for the issue that was discussed sometime back:
http://www.spinics.net/lists/netfilter/msg22099.html
In short is there any solution to enable blocking selective ports in a machine running Linux 2.6.0 + in-kernel ipsec.
I would be very helpful if I can get a working solution or some information on a possible solution.
Thanks,
Devaraj.
Quoted 12 lines · Devaraj Das
Hi,
I wanted to know whether there is a working solution for the issue that was discussed sometime back:
http://www.spinics.net/lists/netfilter/msg22099.html
In short is there any solution to enable blocking selective ports in a machine running Linux 2.6.0 + in-kernel ipsec.
I would be very helpful if I can get a working solution or some information on a possible solution.
Thanks,
Devaraj.
Hi,
if you look at ipsec from Linux-2.6.0 you would have noticed that you define SRC-IP/SRC-PORT -- DST-IP/DST-PORT this mean you question imply the following setup:
1. You allow any port combination to go via the ipsec tunnel
2. You have ports that should not go via the ipsec tunnel wich you allow via ipsec
3. Now this ports should be filtered on iptables layer
- possible at prerouting/mangle
+ define the correkt ipsec config
Gru� Thomas Lu�nig
Thanks for your responses Thomas & Lane. I forgot to mention that I am using racoon as the IKE daemon. If I enable ipsec tunnelling between two linux-2.6 machines, things work fine. I am able to restrict accesses to ports, etc.
I also have windows (2K) machines that can be connected as a client to the linux-2.6 machine. The problem that I am facing now is that the windows machine's native ipsec implementation does not work if the "tunnel mode" is enabled. So now I am looking for a solution that does not require enabling tunnelling.
Thanks for your help.
Devaraj.
Quoted 27 lines · Thomas Lussnig
Quoted 12 lines · Devaraj Das
Hi,
I wanted to know whether there is a working solution for the issue that was discussed sometime back:
http://www.spinics.net/lists/netfilter/msg22099.html
In short is there any solution to enable blocking selective ports in a machine running Linux 2.6.0 + in-kernel ipsec.
I would be very helpful if I can get a working solution or some information on a possible solution.
Thanks,
Devaraj.Hi,
if you look at ipsec from Linux-2.6.0 you would have noticed that you define SRC-IP/SRC-PORT -- DST-IP/DST-PORT this mean you question imply the following setup:1. You allow any port combination to go via the ipsec tunnel
2. You have ports that should not go via the ipsec tunnel wich you allow via ipsec
3. Now this ports should be filtered on iptables layer
- possible at prerouting/mangle
+ define the correkt ipsec configGru� Thomas Lu�nig
Well, it might not be perfect, but here is what I do, and it 'works for me'
In my ipsec.conf I use the updown script functionality of pluto, i.e. in my conn default I put
leftupdown=/usr/local/bin/updown.sh
and then that script is responsible for setting netfilter rules for that ip while the tunnel is up, i.e.
#!/bin/bash
if [ "$PLUTO_VERB" == "up-client" ] || [ "$PLUTO_VERB" == "up-host" ] ; then
iptables -N $PLUTO_CONNECTION;
iptables -A $PLUTO_CONNECTION -p tcp --dport 22 -j ACCEPT;
iptables -A $PLUTO_CONNECTION -p tcp --dport 23 -j ACCEPT;
iptables -A $PLUTO_CONNECTION -p tcp --dport 80 -j ACCEPT;
iptables -A $PLUTO_CONNECTION -p tcp --dport 443 -j ACCEPT;
iptables -A $PLUTO_CONNECTION -p tcp --dport 3389 -j ACCEPT;
iptables -A $PLUTO_CONNECTION -p tcp --dport 5900 -j ACCEPT;
iptables -A $PLUTO_CONNECTION -p icmp --icmp-type echo-reply
-j ACCEPT;
iptables -A $PLUTO_CONNECTION -p icmp --icmp-type echo-request
-j ACCEPT;
iptables -A $PLUTO_CONNECTION -j ACCEPT
iptables -I INPUT -s $PLUTO_PEER -j $PLUTO_CONNECTION;
iptables -I FORWARD -s $PLUTO_PEER -j $PLUTO_CONNECTION;
exit 0;
elif [ "$PLUTO_VERB" == "down-client" ] || [ "$PLUTO_VERB" == "down-host" ] ; then
iptables -D INPUT -s $PLUTO_PEER -j $PLUTO_CONNECTION;
iptables -D FORWARD -s $PLUTO_PEER -j $PLUTO_CONNECTION;
iptables -F $PLUTO_CONNECTION;
iptables -X $PLUTO_CONNECTION;
exit 0;
fi
exit 0;obviously if you needed different rules per tunnel you could just move the updown into the individual conn and define a seperate script per connection with different rules. all of the $PLUTO_... stuff is set in the ENV while the connection is being built... obviously for me, my FORWARD chain is a default drop, so I am just inserting at the top and allowing what I want for the duration of the tunnel.
Hope that helps.
Lane
Quoted 12 lines · Devaraj Das
Hi,
I wanted to know whether there is a working solution for the issue that was discussed sometime back:
http://www.spinics.net/lists/netfilter/msg22099.html
In short is there any solution to enable blocking selective ports in a machine running Linux 2.6.0 + in-kernel ipsec.
I would be very helpful if I can get a working solution or some information on a possible solution.
Thanks,
Devaraj.
Lets take for this discussion a simple case where
* we want to disable 10.0.1.5's access to port 5000 on another machine 10.0.1.1.
* 10.0.1.5, however, has access to all other ports on 10.0.1.1.
* Another machine 10.0.1.6 has access to all ports on 10.0.1.1.
* Creating tunnels to 10.0.1.1 may not be possible on all machines.
* All the clients have to necessarily go through the ipsec protocols...
* racoon is the key mgmt daemon.
Please let me know your inputs...
Thanks,
Devaraj.
Quoted 60 lines · Lane Powers
Well, it might not be perfect, but here is what I do, and it 'works for me'
In my ipsec.conf I use the updown script functionality of pluto, i.e. in my conn default I put
leftupdown=/usr/local/bin/updown.shand then that script is responsible for setting netfilter rules for that ip while the tunnel is up, i.e.
#!/bin/bash
if [ "$PLUTO_VERB" == "up-client" ] || [ "$PLUTO_VERB" == "up-host" ] ; theniptables -N $PLUTO_CONNECTION; iptables -A $PLUTO_CONNECTION -p tcp --dport 22 -j ACCEPT; iptables -A $PLUTO_CONNECTION -p tcp --dport 23 -j ACCEPT; iptables -A $PLUTO_CONNECTION -p tcp --dport 80 -j ACCEPT; iptables -A $PLUTO_CONNECTION -p tcp --dport 443 -j ACCEPT; iptables -A $PLUTO_CONNECTION -p tcp --dport 3389 -j ACCEPT; iptables -A $PLUTO_CONNECTION -p tcp --dport 5900 -j ACCEPT; iptables -A $PLUTO_CONNECTION -p icmp --icmp-type echo-reply(quoted diff) +0
-2-j ACCEPT; iptables -A $PLUTO_CONNECTION -p icmp --icmp-type echo-request -j ACCEPT; iptables -A $PLUTO_CONNECTION -j ACCEPT iptables -I INPUT -s $PLUTO_PEER -j $PLUTO_CONNECTION; iptables -I FORWARD -s $PLUTO_PEER -j $PLUTO_CONNECTION; exit 0;elif [ "$PLUTO_VERB" == "down-client" ] || [ "$PLUTO_VERB" == "down-host" ] ; then
iptables -D INPUT -s $PLUTO_PEER -j $PLUTO_CONNECTION; iptables -D FORWARD -s $PLUTO_PEER -j $PLUTO_CONNECTION; iptables -F $PLUTO_CONNECTION; iptables -X $PLUTO_CONNECTION; exit 0; fi exit 0;obviously if you needed different rules per tunnel you could just move the updown into the individual conn and define a seperate script per connection with different rules. all of the $PLUTO_... stuff is set in the ENV while the connection is being built... obviously for me, my FORWARD chain is a default drop, so I am just inserting at the top and allowing what I want for the duration of the tunnel.
Hope that helps.
Lane
Quoted 12 lines · Devaraj Das
Hi,
I wanted to know whether there is a working solution for the issue that was discussed sometime back:
http://www.spinics.net/lists/netfilter/msg22099.html
In short is there any solution to enable blocking selective ports in a machine running Linux 2.6.0 + in-kernel ipsec.
I would be very helpful if I can get a working solution or some information on a possible solution.
Thanks,
Devaraj.