Skip to contentSkip to conversation

mips-linux cross-compiler

DISCUSSION Ronen Shitrit 3 participants 3 messages Mar 30, 2004 MIPS

lore
Share & tools
lore
#0 lore raw

Hi

I have a mips-linux cross compiler on i686 host, which is using gcc 2.95.3 . This compiler doesn't support the MIPS 4 Instruction Set,
So I'm trying to build a new mips-linux cross compiler using any gcc 3.3/2.* but without any luck,
Did anyone succeed to build such a cross compiler??
which gcc and binutils version did you use??
what are the configure flags you used??
Did you used any special steps?? (except for configure ... , make, make install )

Thanks a lot

Signature · 9 lines
Ronen Shitrit

M.S.I.L
D.N. Misgav  20184
Tel:   +972-4-9951000
Fax:   +972-4-9951001
Email: mailto: [email protected]
_____________________________________________________________
This message may contain confidential, proprietary or legally privileged information. The information is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone, or by e-mail and delete the message from your computer.
#1 lore raw
Quoted 9 lines · Ronen Shitrit

I have a mips-linux cross compiler on i686 host, which is using gcc 2.95.3 . This compiler doesn't support the MIPS 4 Instruction Set,
So I'm trying to build a new mips-linux cross compiler using any gcc 3.3/2.* but without any luck,
Did anyone succeed to build such a cross compiler??
which gcc and binutils version did you use??
what are the configure flags you used??
Did you used any special steps?? (except for configure ... , make, make install )

`apt-get install toolchain-source' and follow the instructions in /usr/share/doc/toolchain-source/.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#2 lore raw
In reply to Ronen Shitrit
Quoted 12 lines · Ronen Shitrit

Hi

I have a mips-linux cross compiler on i686 host, which is using gcc 2.95.3 . This compiler doesn't support the MIPS 4 Instruction Set,
So I'm trying to build a new mips-linux cross compiler using any gcc 3.3/2.* but without any luck,
Did anyone succeed to build such a cross compiler??
which gcc and binutils version did you use??
what are the configure flags you used??
Did you used any special steps?? (except for configure ... , make, make install )

Quoted 1 line

Thanks a lot

I've successfully built toolchains for mipsel using
http://www.kegel.com/crosstool/

It's a great tool, makes crosstoolchains building a piece of cake. The toolchain was built for gcc-3.3.2 and glibc-2.3.2

hope this helps..

cheers,

Signature · 4 lines
Steve Lazaridis
Software Engineer
Fortress Technologies
[email protected] | Ph:813.288.7388 x115