2.6.5-aa1
Quoted 3 lines
This fixes a tiny race in the recent mprotect merging code, here's the intradiff for review, plus it merges some nice lowlatency improvement from Takashi.
Runs fine her with my GNOME 2.6 desktop. Fast like Speedy Gonzales. Good work.
But now with the vanilla 2.6.5 and/or -aa1 my favourite game Enemy Territory quits with "signal 11". With 2.6.5-rc3 it runs stable for hours.
No change in the kernel config, all with preempt, no CONFIG_REGPARM for nVidia binary drivers is set, or other changes. But only when I want to access the net server game browser in ET to play online! Only then bumm!
With 2.6.5-rc3 all runs fine. Amusingly, hmmm?
Marcus
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Sunday 04 April 2004 17:05, Marcus Hartig wrote:
<snip>
Quoted 6 lines
But now with the vanilla 2.6.5 and/or -aa1 my favourite game Enemy Territory quits with "signal 11". With 2.6.5-rc3 it runs stable for hours.
No change in the kernel config, all with preempt, no
CONFIG_REGPARMfor nVidia binary drivers is set, or other changes. But only when I want to access the net server game browser in ET to play online! Only then bumm!
Same here (with vanilla 2.6.5, I didn't try -aa.)
Quoted 1 line
With 2.6.5-rc3 all runs fine. Amusingly, hmmm?
In 2.6.5-rc1 it works fine.
Jeff.
- --
Penguin : Linux version 2.6.2-rc2-net64 on an i686 machine (3932.16 BogoMips). -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFAcJNhwFP0+seVj/4RAp6gAKCXL7rhnhWrlPLGHd+uHYNU1b+QggCcCb0n ivXbW7pWxMXXEt+jlH8gEx0=
=tmuS
-----END PGP SIGNATURE-----
Quoted 5 lines · Jeff Sipek
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1On Sunday 04 April 2004 17:05, Marcus Hartig wrote:
<snip>
Quoted 8 lines
Quoted 6 lines
But now with the vanilla 2.6.5 and/or -aa1 my favourite game Enemy Territory quits with "signal 11". With 2.6.5-rc3 it runs stable for hours.
No change in the kernel config, all with preempt, no
CONFIG_REGPARMfor nVidia binary drivers is set, or other changes. But only when I want to access the net server game browser in ET to play online! Only then bumm!Same here (with vanilla 2.6.5, I didn't try -aa.)
did you get an oops or just a sigsegv? (see dmesg) If you only got a sigsegv can you try to keep the segfaulting process under "strace -o /tmp/o -p <pid>" and report the last few syscalls before the segfault? That should reduce the scope of the problem, I had a look at the diff between rc3 and 2.6.5 final but I found nothing obvious that could explain your problem (yet).
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 1 line · Andrea Arcangeli
did you get an oops or just a sigsegv? (see dmesg)
only sigsegv
Quoted 3 lines
If you only got a
sigsegv can you try to keep the segfaulting process under "strace -o/tmp/o-p <pid>" and report the last few syscalls before the segfault?
Sure. I started the process as:
artsdsp -m et
et is a shell script (created during the installation) that changes the working directory and executes et.x86. Then, I attached strace to the actual executable (et.x86.)
Here are last few lines of the output:
ioctl(68, 0xc0104629, 0xbfffda98) = 0 munmap(0x47e37000, 1056768) = 0 ioctl(68, 0xc0104629, 0xbfffda98) = 0 ioctl(70, 0xc0184633, 0xbfffdaa4) = 0 ioctl(68, 0xc0104629, 0xbfffdab4) = 0 ioctl(71, 0xc01046cf, 0xbfffda88) = 0 close(71) = 0 ioctl(68, 0xc0104629, 0xbfffdab4) = 0 ioctl(72, 0xc01046cf, 0xbfffda88) = 0 close(72) = 0 ioctl(68, 0xc0104629, 0xbfffdab4) = 0 ioctl(73, 0xc01046cf, 0xbfffda88) = 0 close(73) = 0 ioctl(68, 0xc0104629, 0xbfffdaa4) = 0 ioctl(68, 0xc0104629, 0xbfffdaa4) = 0 ioctl(68, 0xc0104629, 0xbfffdaa4) = 0 ioctl(68, 0xc0104629, 0xbfffda98) = 0 ioctl(68, 0xc0104629, 0xbfffda8c) = 0 ioctl(68, 0xc0104629, 0xbfffdaa4) = 0 ioctl(68, 0xc0104629, 0xbfffdaa4) = 0 ioctl(68, 0xc0104629, 0xbfffdaa4) = 0 munmap(0x4804b000, 4096) = 0 ioctl(68, 0xc0104629, 0xbfffdab4) = 0 ioctl(68, 0xc0104629, 0xbfffdab4) = 0 close(70) = 0 getpid() = 1987 munmap(0x46b9b000, 378720) = 0 munmap(0x46bf8000, 4933916) = 0 write(2, "Shutdown tty console\n", 21) = 21
ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig -icanon -ec ho ...}) = 0
ioctl(0, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig icanon echo .. .}) = 0
ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo
...}) = 0
munmap(0x4bbd5000, 1210664) = 0 munmap(0x4c029000, 46072) = 0 munmap(0x4c257000, 344064) = 0 munmap(0x4c035000, 2233160) = 0 munmap(0x4c2ab000, 1210664) = 0 munmap(0x4c3d3000, 46072) = 0 munmap(0x489bd000, 4096) = 0 exit_group(0) = ?
Quoted 3 lines
That should reduce the scope of the problem, I had a look at the diff between rc3 and 2.6.5 final but I found nothing obvious that could explain your problem (yet).
I had to use artsdsp to run et, because it, just like everything else here, hangs when it tries to open /dev/dsp. Even dd if=/dev/dsp of=/dev/null hangs. Interestingly enough, xmms works without any problems via both alsa and oss emulation.
Strace reports shows this:
open("/dev/dsp", O_RDWR
and waits forever. While lsof shows NO processes. (Note: the sound issue is not new, I just tested 2.6.2-rc? and it was broken there too.)
Jeff.
- --
Keyboard not found!
Press F1 to enter Setup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFAcMIXwFP0+seVj/4RAsEoAKCxzeLvcxtmCIk5TDqiBQvFHAcJ4QCdH8yg BqvMqoTQvcSEjPC453IJTOs=
=Fq9B
-----END PGP SIGNATURE-----
Quoted 6 lines · Andrea Arcangeli
did you get an oops or just a sigsegv? (see dmesg) If you only got a sigsegv can you try to keep the segfaulting process under "strace -o
/tmp/o-p <pid>" and report the last few syscalls before the segfault? That should reduce the scope of the problem, I had a look at the diff between rc3 and 2.6.5 final but I found nothing obvious that could explain your problem (yet).
nForce2 board, nVidia bin driver 5341 with ALSA sound driver snd_intel8x0. No sound daemon under my Fedora GNOME Desktop running. Online with DSL connection. Ive tested it again, no chance with 2.6.5 only with rc3, switching back and it runs fine. ALSA changes? Or in the net code? To get sound in the game I do this:
echo "et.x86 0 0 direct" > /proc/asound/card0/pcm0p/oss echo "et.x86 0 0 disable" > /proc/asound/card0/pcm0c/oss
The related part (i hope) of strace:
-------------------------------------------
sched_yield() = 0 sched_yield() = 0 sched_yield() = 0 sched_yield() = 0 sched_yield() = 0 sched_yield() = 0 sched_yield() = 0 sched_yield() = 0
gettimeofday({1081141090, 664894}, NULL) = 0gettimeofday({1081141090, 664917}, NULL) = 0gettimeofday({1081141090, 664944}, NULL) = 0ioctl(36, SNDCTL_DSP_GETOPTR, 0xbffff774) = 0time([1081141090]) = 1081141090gettimeofday({1081141090, 665080}, NULL) = 0 open("/home/marcus/.etwolf/etmain/etkey", O_RDONLY) = 39
close(39) = 0open("/home/marcus/.etwolf/etmain/etkey", O_RDONLY) = 39fstat64(39, {st_mode=S_IFREG|0754, st_size=67, ...}) = 0mmap2(NULL, 131072, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x54355000 read(39, "0000001002200311220003785725I\374CJ"..., 131072) = 67
read(39, "", 131072) = 0 close(39) = 0 munmap(0x54355000, 131072) = 0 time([1081141090]) = 1081141090
gettimeofday({1081141090, 665413}, NULL) = 0time([1081141090]) = 1081141090gettimeofday({1081141090, 665459}, NULL) = 0time([1081141090]) = 1081141090gettimeofday({1081141090, 665502}, NULL) = 0ioctl(29, FIONREAD, [32]) = 0read(29, "\6\0\24\1\310\t\34\0\217\0\0\0\2\0\340\1\0\0\0\0\376\377"..., 32) = 32 gettimeofday({1081141090, 665627}, NULL) = 0ioctl(29, FIONREAD, [32]) = 0read(29, "\6\0\24\1\320\t\34\0\217\0\0\0\2\0\340\1\0\0\0\0\377\377"..., 32) = 32 gettimeofday({1081141090, 665705}, NULL) = 0ioctl(29, FIONREAD, [32]) = 0read(29, "\6\0\24\1\330\t\34\0\217\0\0\0\2\0\340\1\0\0\0\0\376\377"..., 32) = 32 gettimeofday({1081141090, 665794}, NULL) = 0ioctl(29, FIONREAD, [0]) = 0read(0, 0xbfff768f, 1) = -1 EAGAIN (Resource temporarily unavailable)recvfrom(37, 0x93848c0, 32768, 0, 0xbfff76e0, 0xbfff76dc) = -1 EAGAIN (Resource temporarily unavailable) gettimeofday({1081141090, 665962}, NULL) = 0gettimeofday({1081141090, 665982}, NULL) = 0ioctl(29, FIONREAD, [0]) = 0read(0, 0xbfff768f, 1) = -1 EAGAIN (Resource temporarily unavailable)recvfrom(37, 0x93848c0, 32768, 0, 0xbfff76e0, 0xbfff76dc) = -1 EAGAIN (Resource temporarily unavailable) gettimeofday({1081141090, 666104}, NULL) = 0ioctl(29, FIONREAD, [0]) = 0read(0, 0xbfff768f, 1) = -1 EAGAIN (Resource temporarily unavailable)recvfrom(37, 0x93848c0, 32768, 0, 0xbfff76e0, 0xbfff76dc) = -1 EAGAIN (Resource temporarily unavailable) gettimeofday({1081141090, 666206}, NULL) = 0
--- SIGSEGV (Segmentation fault) @ 0 (0) ---fstat64(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 3), ...}) = 0mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x54355000 write(1, "Received signal 11, exiting...\n", 31) = 31write(29, "\211\2\2\0\0\0\0\0+D\1\0", 12) = 12read(29, "\1\2\26\1\0\0\0\0\22\0\300\1\0\0\0\0\0\0\0\0\34\0\0\0\300"..., 32) = 32 write(29, "i\2\3\0\2\0\1\0\4\0\1\1\33D\2\0\0\0\0\0 \0\2\0\0\0\0\0"..., 84) = 84 read(29, "\6\0\32\1\337\t\34\0\217\0\0\0\2\0\340\1\0\0\0\0\0\2\200"..., 32) = 32 read(29, "\1\0\34\1\0\0\0\0\1\0\0\0\250\365\377\277\360\270\v\10"..., 32) = 32munmap(0x5075b000, 266240) = 0
-------------------------------------------------------------------------
Thanks, i will test it later with prempt off and an other driver.
Marcus
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Monday 05 April 2004 01:39, Marcus Hartig wrote:
<snip>
Quoted 2 lines
echo "et.x86 0 0 direct" >
/proc/asound/card0/pcm0p/ossecho "et.x86 0 0 disable" >/proc/asound/card0/pcm0c/oss
I used only the first one of the two commands, and had to use artsdsp to get sound. With both of those commands, I just got et running without arts and it didn't sigsegv.
Quoted 1 line
The related part (i hope) of strace:
<snip>
Quoted 2 lines
Thanks, i will test it later with prempt off and an other driver.
Jeff.
- --
Real Programmers consider "what you see is what you get" to be just as bad a concept in Text Editors as it is in women. No, the Real Programmer wants a "you asked for it, you got it" text editor -- complicated, cryptic, powerful, unforgiving, dangerous.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFAcQS8wFP0+seVj/4RAhL6AJ90rSQMKtx9pSAvmDtmkgBtJgwXVwCglLbz SepNHo5CLDfhFZV3Ic3YF3A=
=1NYt
-----END PGP SIGNATURE-----
Quoted 1 line · Martin Schlemmer
Stupid question - where do you get the 5341 driver??
:-) http://www.nforcershq.com/forum/viewtopic.php?t=44256
Marcus
Quoted 3 lines · Andrea Arcangeli
That should reduce the scope of the problem, I had a look at the diff between rc3 and 2.6.5 final but I found nothing obvious that could explain your problem (yet).
It seems to be CONFIG_PREEMPT. I have compiled the 2.6.5-aa1 only without it and ET runs now 30min without a signal11.
Marcus
Quoted 8 lines · Marcus Hartig
Quoted 3 lines · Andrea Arcangeli
That should reduce the scope of the problem, I had a look at the diff between rc3 and 2.6.5 final but I found nothing obvious that could explain your problem (yet).
It seems to be
CONFIG_PREEMPT. I have compiled the 2.6.5-aa1 only without it and ET runs now 30min without a signal11.
sounds good, probably a preempt bug in the alsa code or an rcu issue or something like that. my tree has the most important fixes in the writeback code from Takashi to provide the same lowlatency w/ or w/o CONFIG_PREEMPT so you shouldn't notice much difference either ways. It was a good decision to leave preempt off for higher reliability too, preempt isn't just a matter of spinlocks, sometime you need explicit preempt_disable to make it work right.
still it'd be nice to fix it purerly as an exercise, exercises are useful nevertheless ;).